• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.125-132
• /
• 2007

The use of Self-Leveling material is increasing recently. This paper assesses the quality of surface layer of concrete floor when Self-Leveling material is defective. The paper shows how to predict the defect of SL material before construction begins. The relationship between the quality of surface layer of concrete floor and the defect of SL material was determined and the quality of surface layer of concrete floor was then estimated. The relations between the quality of surface layer and the defect of SL material were determine considering surface strength, moisture, and consistency of surface layer. Absorbing amount was used as the indicator of consistency and the absorbing amount of test material was measured. Then the relations between the test material and surface strength were determined. Generally concrete floor with greater consistency has greater surface strength, however in this study, we hound that high impact concrete floor could have lower surface strength as the consistency gets bigger. The relations between the level of defect occurred in SL material and the quality of surface layer were examined and we clarified that the surface layer with lower consistency gets higher possibility to occur exfoliation in early stage, one or two weeks after constructing SL material. When the consistency is sufficient, the occurring situation of defect depends upon the moisture of surface layer. Little amount of moisture gets higher possibility not to occur the defect. As the amount increases, fissure generates and early exfoliation may occur. In addition, the level of fissure is highly related with the surface strength.

• 건축역사연구
• /
• 제21권1호
• /
• pp.83-98
• /
• 2012

The starting point of this study is the concerning of simple behavioral pattern that whoever enters the inner space with taking off his shoes should go out from the position where he laid his shoes. The using of Ondol (floor heating room) and Maru (lifted wood floor) had changed the architectural space from chair-sitting to floor-sitting space, and it also made the behavior of taking off the shoes at the entrance of building and stepping on the lifted floor. This simple behavior has possibility to make lots of changes to the culture of architectural design. With this noticeable point, this paper is talking about the cultural feature of Korean traditional architecture, especially about the influence of tanking off and putting on shoes. The matter of shoes has changed diverse aspects of building and layout planning. It maximized the difference between front and rear part of building and characterized the lateral extension of Korean traditional house. The ritual space also had evolved from chair-sitting to floor-sitting space according to the type of ritual behavioral pattern. The change on the single building level had influenced on the layout planning of architectural complex. For examples, the parallel layout of ChangDeok-gung palace and the long sequential process to the main pavilion of Buddhist temple are the result of the matter of shoes. And NuGak(樓閣), the double-storied pavilion, on the axis of entering sequence's node is one of the unique planning elements that makes possible to go through the building without taking off the shoes and also makes upper level space for staying. In short, Korean traditional architecture that has the chair-sitting spatial origin of the East Asian cultural sphere has pursued new architectural issues and planning methods according to evolution to the floor-sitting culture.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.441-446
• /
• 2008

The source transfer receiver model ('Source $\times$ Transfer = Response' model) which is widely used by NVH development process of vehicle/transport/machinery to analyze effectively and manage efficiently the structural dynamic behavior is also applicable to construction structure. If the evaluation assessment of the vibration level does not meet the target level, there are two methods, one is source treatment or replacement and the other is the reduction treatment on the transfer structure. In case of source treatment, it is done by source supplier and so, the latter is more practical method to reduce the vibration level. In this study, in order to get the accurate Transfer FE model(floor structure FE model), Experimental modal analysis of part of floor structure and FEM modal analysis of full floor structure are performed, then updating of FE model is performed after correlation analysis between these two results and finally, the modal model and FRF are compared between FE and Experimental results.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.414-422
• /
• 2013

As structure-borne sound, the floor impact sound is one of the serious noises in residential building. Most of heating system applied to the typical Korean residential building is floor heating system which is called ondol. The ondol usually consists of finishing material, mortar with heating coil, light-weight aerated concrete and reinforced concrete. This study focused on the isolation of heavy-weight impact sound and modification of mortar and light-weight aerated concrete. Specifically the glass foam aggregate was added on light-weight aerated concrete. Also, water-cement ratio and amount of cement on mortar were revised. The sound pressure level of heavy-weight impact was measured in reverberation chamber using both bang-machine and impact ball. The size of specimen was 1 m by 1 m. Substitution ratio of glass foam aggregate on light-weight aerated concrete shows relationship with heavy-weight impact sound pressure level. In addition, heavy-weight impact sound pressure level was decreased with increment of water-cement ratio and amount of cement on mortar.

• 한국항해항만학회지
• /
• 제32권6호
• /
• pp.505-513
• /
• 2008

본 연구는 해양건축물 또는 워터프런트 개발계획에 있어 특히 워터프런트에 입지하는 주거단지 계획에 역점을 투어 사용자의 측면에서 기존 워터프런트 주거단지의 거주환경 만족도를 조사, 분석 하였다. 또한 통일 주거단지 내에서도 각층별, 방위별, 위치별 쾌적성에 대해 분석하여 가장 선호하는 층, 방위 위치 통에 관한 근거를 제시하고자 하였다. 본 연구의 결론은 다음과 같다. 1) 만족도의 순서는 남향, 남동향, 동향, 남서향의 순으로 나타났으며 남향, 남동향의 선호 경향이 절대적으로 우세한 것으로 나타났다. 2) 전체 응답자의 67%이상이 향보다는 외부로의 조망이 좋아야 한다고 응답하여 워터프런트 주거단지에 있어서는 조망에 대한 중요성이 매우 크다는 사실을 알 수 있었다. 3) 경관 선호도를 분석한 결과는 안벽형 워터프런트, 호안형 워터프런트 덴 하천형 워터프런트의 세가지 Type의 경관별로 약간의 차이는 있었으나 공통적으로 고층부 경관이 가장 높은 선호도를 보였으며 저층부 경관이 상대적으로 가장 낮은 선호도를 보여주었다.

• 에너지공학
• /
• 제24권1호
• /
• pp.24-31
• /
• 2015

바닥복사난방 공간에서 생활특성과 착의량에 따른 열쾌적 범위를 제시하고 각 조건별 에너지사용량 및 비용을 산출하여 비교하는 것을 목적으로 하였다. 좌식생활이 입식생활보다 낮은 온도에서 중립적 온도를 나타냈는데 바닥표면과 인체사이의 국부적인 열전달이 전신온열감에 영향을 주었기 때문으로 판단된다. 착의량이 높을수록 낮은 온도에서 중립점 온도를 나타냈는데 착의량을 증가시키면 인체에서 방출되는 열손실이 감소하여 낮은 실내온도에서 동일한 열쾌적을 느낄 수 있기 때문으로 판단된다. 좌식생활방식이 입식생활방식보다 평균 6.0%의 에너지 사용량이 절감되는 것으로 나타나 좌식생활이 경제적인 생활방식으로 분석되었다. 착의량 1.2 Clo 상태가 착의량 1.0 Clo 상태보다 평균 13.5%, 착의량 0.8 Clo상태보다 평균 18.0%의 에너지 사용량이 절감되는 것으로 나타나 동절기에 착의량을 증가시키는 생활습관의 변화만으로도 에너지 절감 효과가 큰 것으로 분석되었다.

• 한국산학기술학회논문지
• /
• 제21권8호
• /
• pp.388-394
• /
• 2020

최근 우리나라는 축산농가의 사육환경 개선을 위해 양돈 농가를 대상으로 새로운 동물복지형 사육기준을 도입하려고 한다. 이에 모돈의 군사사육 도입 규정에 대응할 수 있는 모돈사 바닥에 대한 연구들이 필요한 실정이다. 본 연구의 목적은 모돈의 군사사육 방식이면서 바닥의 형태가 각각 깔짚과 슬랏 바닥의 형태로 되어 있는 농가 2곳을 섭외하여 동물복지 수준과 환경 수준 및 모돈의 행동을 평가 및 비교하였다. 동물복지 수준평가는 실험농가 모돈의 몸상처와 외음부상처 평가, 환경 수준은 돈사 안의 황화수소, 암모니아, 이산화탄소 농도를 한 달에 1번씩, 총 4 개월간 측정하였다. 연구 결과 동물복지 수준은 모돈의 몸과 외음부 상처비율이 깔짚 바닥 농가(K 농가)에 비해 콘크리트 슬랏 바닥 농가(H 농가)에서 높게 관찰 되었다. 모돈의 돈방 내의 환경수준은 각각 황화수소 (H2S; H 농가 1.0 ppm, K 농가 0.0 ppm), 암모니아 (NH3; H 농가 45.4 ppm, K 농가 1.3 ppm), 및 이산화탄소 (CO2; H 농가 1102.3 ppm, K 농가 258.8 ppm) 농도가 H 농가에서 높게 측정 되었다. 모돈의 행동분석 중 투쟁행동은 H 농가에서 주로 발생 하였다. 이와 같은 결과는, 동일한 군사형태의 사육시설이지만 바닥재의 차이로 인해 공격행동과 환경수준의 변화를 나타나는데, 향후 추가적으로 바닥재의 종류 및 바닥의 변화들을 제시하면서 행동변화, 동물복지 및 환경수준을 측정하는 연구가 필요 할 것으로 판단된다.

• 소음진동
• /
• 제2권1호
• /
• pp.21-31
• /
• 1992

In the previous paper, we report a practical floor impact sound level prediction method for a heavyweight impact source(Tire), soft impact source such as children jumping and running. According to these results, the calculated value and the measured value correspond comparatively well, regardless of differences in the floor structures. And the floor impact sound for a heavyweight impact source, soft source was strongly influenced by structural factors such as floor slab stiffness and peripheral support conditions. But the floor impact sound for a light impact source (Tapping machine), hard impact source was influenced by resilient layers, composed of multi-layer in floor structures. Thus, In this paper, 4 actual floor structures, all with differing resilient layers, were calculated using impedance method. When these calculation values were compared with the measured values, approximately all the values fell with one rank of the sound insulation grade, reference curve(L curve) by the JIS standard. So, a sample of measured values and calculated values from floor structures is presented to show the accuracy and appropriateness of the impedance method in domestic.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.248-251
• /
• 2004

The vibrational behavior of a front load washing machine is heavily influenced by the floor stiffness on which the washing machine is installed. In case the floor stiffness is extremely low like a wooden floor (we call it a 'soft floor, S/F'), it is quite probable that a washer's rigid body mode exists in the operating frequency range. In this case, the outer frame vibration level would be very high, but the mitigation scheme is quite limited except the excitation force abatement by acquisition of the optimal inertia in the internal vibratory system and the diaphragm's stiffness with the minimum force transfer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.521-526
• /
• 2004

In order to evaluate the effect of blasting vibration in buildings and it's resident located around blasting construction field in urban area, blasting vibration characteristics were measured the vibration level, vibration velocity. The 250g and 750g of charged powder were used at the apartment and at the ground, respectively. In the measurement of the ground, Z(perpendicularity) axis was the highest value in vibration level, but vertical axis was the highest value at 25m point and longitudinal axis was the highest value at 50m point in vibration velocity. The amount of measurement was high value when measuring point is higher than blasting source, while that of measurement was low value when measuring point is lower than blasting source. In the measurement of the apartment, 2 axis was the highest value in vibration level, but in vibration velocity transverse axis was the highest value at ground, was vertical axis at 1st floor, was longitudinal axis at 3rd floor and was vertical and longitudinal axis at 5th floor. The vibration level and the vibration velocity of 50m point showed higher correlation value than 25m point at the ground, but those of 25m point showed higher correlation value than 50m point at the apartment.