• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7549-7554
• /
• 2015

The aim of this study was to develop gastric retentive bi-layered tablet using floating drug delivery technique. Metformin was selected as a model drug due to its narrow absorption window as well as very highly water solubility. These properties of metformin led to be difficult controlling the drug release. The bi-layered tablet was prepared with bi-layered compression machine to minimize interference between floating part and controlling part. The tablet weight, appearance and hardness were evaluated after compression process. The times of 'time to floating' and 'Floating duration' were tested for floating ability and drug release study was also carried out to understand drug release behavior. Furthermore, the drug release of bi-layered tablet was compared with marketed metformin tablet with sustained release pattern (Glucopharge XR$^{(R)}$).The floating ability and drug release behaviors were well controlled by changing amounts of $NaHCO_3$ (floating substance) and hydroxypropyl methylcellulose (HPMC; release control material). Bi-layered tablet had 13s of time to float, over 10h of floating duration and very similar drug release behavior compared with Glucopharge XR$^{(R)}$($f_2$: 89.6). Consequently, the bi-layered tablet with floating ability was successfully prepared and these properties can maximize the efficacy of metformin.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.271-279
• /
• 2022

This paper proposes an advanced dead-time compensation method for dual inverter with a floating capacitor. The dual inverter with floating capacitor is composed of double two-level inverters and a bulk electrolytic capacitor. The output voltage of the dual inverter is dropped by the conduction voltage of the power semiconductors. The voltage drop and dead-time cause the fundamental and harmonic distortions of output currents. When supplied power for OEW-load is low, the dual inverter operates as single inverter for effective operation. The dead-time compensation method for the dual inverter operated as single inverter is needed for reliability. The proposed method using band pass filter in this paper compensates dead-time, dead-time error and changed voltage drop error of power semiconductors for the dual inverter and dual inverter operated as single inverter. The effectiveness of the proposed method is verified by simulation results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.1
• /
• pp.95-102
• /
• 2018

This paper proposes a dual lifting and its cooperative control system with two different kinds of floating cranes. The Mega-erection and Giga-erection in the ship building are used to handle heavier and wider blocks and modules as ships and off-shore platforms are enlarged. However, there is no equipment to handle such Tera-blocks. In order to overcome the limit on performance of existing floating cranes, the dual lifting is proposed in this research. In the dual lifting, two floating cranes are well-coordinated to add up the lift capabilities of both cranes without any loss such that virtually a single crane is lifting, maneuvering and unloading. Two main constraints for the dual lifting are as follows: First, two barges of floating cranes should be constrained as a rigid body not to cause a relative motion between two barges and main hooks of the two cranes should be controlled as main hooks of a single crane. In order words, it is necessary to develop the cooperative control of two floating cranes in order to sustain a center of gravity of the module and minimize the tilting angle during the lifting and unloading by the two floating cranes. Two floating cranes are handled as a master-slave system. The master crane is able to gather information about all working conditions and make a decision to control the individual hook speed, which communicates the slave crane by TCP/IP. The developed control system has been embedded in the real floating crane systems and the dual lifting has been demonstrated five times at SHI shipyard in 2015. The moving angles of the lifting module are analyzed and verified to be suitable for hoisting control. It is verified that the dual lifting can be applied for many heavier and wider blocks and modules to shorten the construction time of ships and off-shore platforms.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1017-1020
• /
• 1998

We propose an algorithm which processes the floating-point $n_{addition}$traction and rounding in parallel. It also processes multiplication and rounding in the same way. The hardware model is presented that minimizes the delay time to get results for all the rounding modes defined in the IEEE Standards. An unified method to get the three bits(L, G, S)for the rounding is described. We also propose an unified guide line to determine the 1-bit shift for the post-normalization in the Floating-point $n_{addition}$traction and multiplication.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.68-72
• /
• 2002

CIS 응용에서 공간 객체들이 여러 사이트에 걸쳐 중복 저장되어 있다면, 이 객체들의 수정 시 일관성 제어를 위한 중복 제어 기법이 필요하다. 그러나, 일반적인 비즈니스 데이터를 위한 정통적인 중복 제어기법은 공간 데이터에는 그대로 사용될 수 없다. 공간 데이터의 수정은 긴 트랜 션을 필요로 하며, 또한 일반 데이터와 달리 데이터간의 공간 종속성을 지니기 때문이다. 본 논문은 기존의 Primary Copy 중복 제어 기법을 확장하며, time-stamp에 기반하여 Primary Copy 사이트가 변경되는 Floating Primary Copy 기법을 제안한다. 본 논문에서 제안하는 중복 제어 기법은 Primary Copy 사이트를 동적으로 변경함으로써, 긴 트랜 션의 중복 일관성 제어를 지원할 수 있다.

• Journal of Korea Foundry Society
• /
• v.42 no.1
• /
• pp.61-66
• /
• 2022

Hydraulic units are important components of agricultural and construction machinery, and thus require high-quality castings. However, gas defects occurring inside the sand cores of the castings due to the resin used is a problem. This study therefore aimed to develop a casting simulation method that can clarify the gas defect positions. Gas defects are thought to be caused by gas generated after the molten metal fills up the mold cavity. The gas constant is the most effective factor for simulating this gas generated from sand cores. It is calculated by gas generating temperature and analysis of composition in the inert gas atmosphere modified according to the mold filling conditions of molten metal. It is assumed that gases generated from the inside of castings remain if the following formula is established. [Time of occurrence of gas generation] + [Time of occurrence of gas floating] > [Time of occurrence of casting surface solidification] The possibility of gas defects is evaluated by the time of occurrence of gas generation and gas floating calculated using the gas constant. The residual position of generated gases is decided by the closed loops indicating the final solidification location in the casting simulation. The above procedure enables us to suggest suitable casting designs with zero gas defects, without the need to repeat casting tests.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.4
• /
• pp.269-276
• /
• 2013

Information and communication technology (ICT) is a promising solution for mitigating road traffic congestion. ICT allows road users and vehicles to be managed based on real-time road status information. In Tanzania, traffic congestion causes losses of TZS 655 billion per year. The main objective of this study was to develop an optimal approach for integrating real-time road information (RRI) to mitigate traffic congestion. Our research survey focused on three cities that are highly affected by traffic congestion, i.e., Arusha, Mwanza, and Dar es Salaam. The results showed that ICT is not yet utilized fully to solve road traffic congestion. Thus, we established a possible approach for Tanzania based on an analysis of road traffic data provided by organizations responsible for road traffic management and road users. Furthermore, we evaluated the available road information management techniques to test their suitability for use in Tanzania. Using the floating car data technique, fuzzy logic was implemented for real-time traffic level detection and decision making. Based on this solution, we propose a RRI system architecture, which considers the effective utilization of readily available communication technology in Tanzania.

• Journal of Wind Energy
• /
• v.14 no.1
• /
• pp.29-36
• /
• 2023

The analysis of the floating offshore wind turbine platform is based on the procedures provided by the IEC including the International Classification Society, which recommends the analysis in the time domain. But time-domain simulation requires a lot of time and resources to solve tens of thousands of DLCs. This acts as a barrier in terms of floating structure development. For final verification, it requires very precise analysis in the time domain, but from an initial design point of view, a simplified verification procedure to predict the quantity of materials quickly and achieve relatively accurate results is crucial. In this study, a structural design procedure using a design wave applied in the oil and gas industries is presented combined with a conservative turbine load. With this method, a quick design spiral can be rotated, and it is possible to review FOWTs of various shapes and sizes. Consequently, a KRISO Semi-Submersible FOWT platform was developed using a simplified design procedure in frequency-domain analysis.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.2
• /
• pp.84-90
• /
• 2016

In this study, a six degree-of-freedom motion analysis of a wind-wave hybrid platform equipped with numerous wave energy converters (WECs) was carried out. To examine the effect of the WECs on the platform, an analysis of one-way coupling was carried out, which only considered the power take-off (PTO) damping of the static WECs on the platform. The equation of motion of a floating platform with mooring lines in the time domain was established, and the responses of the one-way coupled platform were then compared with the case of a platform without any coupling effects from the WECs. The hydrodynamic coefficients and wave exciting forces were obtained from the 3D diffraction/radiation pre-processor code WAMIT based on the boundary element method. Then, an analysis of the dynamic responses of the floating platform with or without the WEC effect in the time domain was carried out. All of the dynamics of a floating platform with multiple wind turbines were obtained by coupling FAST and CHARM3D in the time domain, which was further extended to include additional coupled dynamics for multiple turbines. The analysis showed that the PTO damping effect on platform motions was negligible, but coupled effects between multiple WECs and the platform may differentiate the heave, roll, and pitch platform motions from the one without any effects induced by WECs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.165-171
• /
• 2006

The appearance of over 10,000 TEU containerships (so called Mega-containerships) is determined. In order to operate these ships effectively, the number of these calling ports will diminish, and then feeder ships will transport cargoes from the hub-ports where mega-containerships call to the destination ports. In the hub-ports, handling containers for mega-containerships become huger, thus it is important for terminals to deal with cargo handling as soon as possible. However, the present terminal layout might have the limitation of maximum throughput per time unit. And then the transit time at the ports become longer. Therefore, we investigate the effect on some different terminal layouts with new alternatives. Actually, we discuss the ship-to-berth allocation at some adjacent berths for mega-containerships on three types of terminal layouts. First one is the conventional type consisted by some linear berths, most container terminals in the world are normally this type. Second one is the indented type consisted by linear berths and indented berths which we can handle from both sides of mega-containership simultaneously. Third one is the floating type consisted by linear berths and the floating berth. On this type, mega-containerships can moor between linear and floating berths. The merits of this type are that we can also handle from both sides of mega-containerships simultaneously, and ships can go through between linear berth and floating berths. Thus it is easier for ships to moor and leave berths. Under such assumptions, we examine the numerical experiments. In most cases, the total service times on the indented type are the longest among three types, these on the floating type are the next longer. Those reasons are that these layouts have the differences of berth occupancy obtained by the time and space axes, and whether the precedence constraints of ship service order needs or not.