• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7549-7554
• /
• 2015

본 이 연구의 목적은 부유 기술을 이용하여 제형이 위에 더 오래도록 머무르면서 약물을 지속적으로 방출하는 이중정을 개발하는 것이다. 실험방법으로는 메트포르민을 주 약물로 선정하였는데, 그 이유는 메트포르민은 주로 소장 상부에서만 흡수되는 좁은 흡수 영역 대를 가지고 있는 점, 용해도가 매우 높아 약물 방출을 조절하는 것이 쉽지 않은 점 등 때문이다. 정제의 부유를 위한 가스를 생성하는 부분과 약물의 방출을 조절하는 부분의 간섭을 최소화하기 위해 이중정 타정 기를 사용해 이중정으로 제조하였으며, 정제의 모양, 질량 및 경도를 측정하였고, 부유정의 중요한 요소인 부유 촉발시간과 부유유지 시간을 평가하였다. 또, 약물의 방출 조절을 평가하기 위해 용출시험을 시행하였으며, 그 결과를 시판되고 있는 메트포르민 서방성 제제인 Glucopharge XR$^{(R)}$과 비교평가 하였다. 그 결과, 부유 촉발제인 $NaHCO_3$ 및 약물 방출 조절제인 hydroxypropyl methylcellulose (HPMC)의 사용량에 따라 13초의 부유 촉발시간, 10시간 이상의 부유 유지시간 및 시판 제제와 매우 유사한 약물 방출 거동을 확인할 수 있었다 ($f_2$: 89.6). 결론적으로 메트포르민을 함유한 위 체류 이중정을 성공적으로 개발할 수 있었으며, 그로 인해 메트포르민의 치료효과도 극대화 할 수 있을 것으로 예상된다.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.271-279
• /
• 2022

본 논문은 플로팅 커패시터를 갖는 이중 인버터의 향상된 데드 타임 보상 기법을 제안한다. 플로팅 커패시터를 갖는 이중 인버터는 2-레벨 단일 인버터보다 전력 반도체가 6개가 추가된다. 전력 반도체의 수가 증가로 이중 인버터의 출력 전압은 추가된 전력 반도체의 도통 전압만큼 감소되며 출력 전류 품질은 전력 반도체에 의한 전압 강하와 데드 타임에 의해 저하된다. 본 논문에서 제안하는 기법은 이중 인버터의 데드 타임 및 전력 반도체의 도통 전압을 보상하여 전류 품질을 개선하고 추가적인 대역통과 필터를 이용한 고조파 보상 기법을 통해 데드 타임과 도통 전압 보상에 대한 오차를 추가 보상한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.95-102
• /
• 2018

This paper proposes a dual lifting and its cooperative control system with two different kinds of floating cranes. The Mega-erection and Giga-erection in the ship building are used to handle heavier and wider blocks and modules as ships and off-shore platforms are enlarged. However, there is no equipment to handle such Tera-blocks. In order to overcome the limit on performance of existing floating cranes, the dual lifting is proposed in this research. In the dual lifting, two floating cranes are well-coordinated to add up the lift capabilities of both cranes without any loss such that virtually a single crane is lifting, maneuvering and unloading. Two main constraints for the dual lifting are as follows: First, two barges of floating cranes should be constrained as a rigid body not to cause a relative motion between two barges and main hooks of the two cranes should be controlled as main hooks of a single crane. In order words, it is necessary to develop the cooperative control of two floating cranes in order to sustain a center of gravity of the module and minimize the tilting angle during the lifting and unloading by the two floating cranes. Two floating cranes are handled as a master-slave system. The master crane is able to gather information about all working conditions and make a decision to control the individual hook speed, which communicates the slave crane by TCP/IP. The developed control system has been embedded in the real floating crane systems and the dual lifting has been demonstrated five times at SHI shipyard in 2015. The moving angles of the lifting module are analyzed and verified to be suitable for hoisting control. It is verified that the dual lifting can be applied for many heavier and wider blocks and modules to shorten the construction time of ships and off-shore platforms.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1017-1020
• /
• 1998

We propose an algorithm which processes the floating-point $n_{addition}$traction and rounding in parallel. It also processes multiplication and rounding in the same way. The hardware model is presented that minimizes the delay time to get results for all the rounding modes defined in the IEEE Standards. An unified method to get the three bits(L, G, S)for the rounding is described. We also propose an unified guide line to determine the 1-bit shift for the post-normalization in the Floating-point $n_{addition}$traction and multiplication.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2002년도 춘계학술발표논문집(상)
• /
• pp.68-72
• /
• 2002

CIS 응용에서 공간 객체들이 여러 사이트에 걸쳐 중복 저장되어 있다면, 이 객체들의 수정 시 일관성 제어를 위한 중복 제어 기법이 필요하다. 그러나, 일반적인 비즈니스 데이터를 위한 정통적인 중복 제어기법은 공간 데이터에는 그대로 사용될 수 없다. 공간 데이터의 수정은 긴 트랜 션을 필요로 하며, 또한 일반 데이터와 달리 데이터간의 공간 종속성을 지니기 때문이다. 본 논문은 기존의 Primary Copy 중복 제어 기법을 확장하며, time-stamp에 기반하여 Primary Copy 사이트가 변경되는 Floating Primary Copy 기법을 제안한다. 본 논문에서 제안하는 중복 제어 기법은 Primary Copy 사이트를 동적으로 변경함으로써, 긴 트랜 션의 중복 일관성 제어를 지원할 수 있다.

• 한국주조공학회지
• /
• 제42권1호
• /
• pp.61-66
• /
• 2022

Hydraulic units are important components of agricultural and construction machinery, and thus require high-quality castings. However, gas defects occurring inside the sand cores of the castings due to the resin used is a problem. This study therefore aimed to develop a casting simulation method that can clarify the gas defect positions. Gas defects are thought to be caused by gas generated after the molten metal fills up the mold cavity. The gas constant is the most effective factor for simulating this gas generated from sand cores. It is calculated by gas generating temperature and analysis of composition in the inert gas atmosphere modified according to the mold filling conditions of molten metal. It is assumed that gases generated from the inside of castings remain if the following formula is established. [Time of occurrence of gas generation] + [Time of occurrence of gas floating] > [Time of occurrence of casting surface solidification] The possibility of gas defects is evaluated by the time of occurrence of gas generation and gas floating calculated using the gas constant. The residual position of generated gases is decided by the closed loops indicating the final solidification location in the casting simulation. The above procedure enables us to suggest suitable casting designs with zero gas defects, without the need to repeat casting tests.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.269-276
• /
• 2013

Information and communication technology (ICT) is a promising solution for mitigating road traffic congestion. ICT allows road users and vehicles to be managed based on real-time road status information. In Tanzania, traffic congestion causes losses of TZS 655 billion per year. The main objective of this study was to develop an optimal approach for integrating real-time road information (RRI) to mitigate traffic congestion. Our research survey focused on three cities that are highly affected by traffic congestion, i.e., Arusha, Mwanza, and Dar es Salaam. The results showed that ICT is not yet utilized fully to solve road traffic congestion. Thus, we established a possible approach for Tanzania based on an analysis of road traffic data provided by organizations responsible for road traffic management and road users. Furthermore, we evaluated the available road information management techniques to test their suitability for use in Tanzania. Using the floating car data technique, fuzzy logic was implemented for real-time traffic level detection and decision making. Based on this solution, we propose a RRI system architecture, which considers the effective utilization of readily available communication technology in Tanzania.

• 풍력에너지저널
• /
• 제14권1호
• /
• pp.29-36
• /
• 2023

The analysis of the floating offshore wind turbine platform is based on the procedures provided by the IEC including the International Classification Society, which recommends the analysis in the time domain. But time-domain simulation requires a lot of time and resources to solve tens of thousands of DLCs. This acts as a barrier in terms of floating structure development. For final verification, it requires very precise analysis in the time domain, but from an initial design point of view, a simplified verification procedure to predict the quantity of materials quickly and achieve relatively accurate results is crucial. In this study, a structural design procedure using a design wave applied in the oil and gas industries is presented combined with a conservative turbine load. With this method, a quick design spiral can be rotated, and it is possible to review FOWTs of various shapes and sizes. Consequently, a KRISO Semi-Submersible FOWT platform was developed using a simplified design procedure in frequency-domain analysis.

• 한국해양공학회지
• /
• 제30권2호
• /
• pp.84-90
• /
• 2016

In this study, a six degree-of-freedom motion analysis of a wind-wave hybrid platform equipped with numerous wave energy converters (WECs) was carried out. To examine the effect of the WECs on the platform, an analysis of one-way coupling was carried out, which only considered the power take-off (PTO) damping of the static WECs on the platform. The equation of motion of a floating platform with mooring lines in the time domain was established, and the responses of the one-way coupled platform were then compared with the case of a platform without any coupling effects from the WECs. The hydrodynamic coefficients and wave exciting forces were obtained from the 3D diffraction/radiation pre-processor code WAMIT based on the boundary element method. Then, an analysis of the dynamic responses of the floating platform with or without the WEC effect in the time domain was carried out. All of the dynamics of a floating platform with multiple wind turbines were obtained by coupling FAST and CHARM3D in the time domain, which was further extended to include additional coupled dynamics for multiple turbines. The analysis showed that the PTO damping effect on platform motions was negligible, but coupled effects between multiple WECs and the platform may differentiate the heave, roll, and pitch platform motions from the one without any effects induced by WECs.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.165-171
• /
• 2006

The appearance of over 10,000 TEU containerships (so called Mega-containerships) is determined. In order to operate these ships effectively, the number of these calling ports will diminish, and then feeder ships will transport cargoes from the hub-ports where mega-containerships call to the destination ports. In the hub-ports, handling containers for mega-containerships become huger, thus it is important for terminals to deal with cargo handling as soon as possible. However, the present terminal layout might have the limitation of maximum throughput per time unit. And then the transit time at the ports become longer. Therefore, we investigate the effect on some different terminal layouts with new alternatives. Actually, we discuss the ship-to-berth allocation at some adjacent berths for mega-containerships on three types of terminal layouts. First one is the conventional type consisted by some linear berths, most container terminals in the world are normally this type. Second one is the indented type consisted by linear berths and indented berths which we can handle from both sides of mega-containership simultaneously. Third one is the floating type consisted by linear berths and the floating berth. On this type, mega-containerships can moor between linear and floating berths. The merits of this type are that we can also handle from both sides of mega-containerships simultaneously, and ships can go through between linear berth and floating berths. Thus it is easier for ships to moor and leave berths. Under such assumptions, we examine the numerical experiments. In most cases, the total service times on the indented type are the longest among three types, these on the floating type are the next longer. Those reasons are that these layouts have the differences of berth occupancy obtained by the time and space axes, and whether the precedence constraints of ship service order needs or not.