• 반도체디스플레이기술학회지
• /
• 제14권2호
• /
• pp.41-45
• /
• 2015

From 20nm technology node, the finFET has become standard device for ULSI's. However, the finFET process made stacking gate non-volatile memory obsolete. Some reported capacitor-less DRAM structure by utilizing the FBE. We present possible non-volatile memory device structure similar to the dual gate MOSFET. One of the gates is left floating. Since body of the finFET is only 40nm thick, control gate bias can make electron tunneling through the floating gate oxide which sits across the body. For programming, gate is biased to accumulation mode with few volts. Simulation results show that the programming electron current flows at the interface between floating gate oxide and the body. It also shows that the magnitude of the programming current can be easily controlled by the drain voltage. Injected electrons at the floating gate act similar to the body bias which changes the threshold voltage of the device.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.630-633
• /
• 2008

A particle method has been developed for analyzing the motion of 2-D floating body in waves. The particle method is based on the MPS(Moving Particle Semi-implicit) method suggested by Koshizuka et al. (1996), and the flow motion coupled with the motion of floating body can be simulated. The wavemaker and wave absorber are installed at the inflow and outflow boundaries in a computational domain, respectively. The motion characteristics of a floating body is investigated numerically under the various computational conditions.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.755-759
• /
• 2014

We propose an integrate-and-fire neuron circuit and synaptic devices with the floating body MOSFETs. The synaptic devices consist of a floating body MOSFET to imitate biological synaptic characteristics. The synaptic learning is performed by hole accumulation. The synaptic device has short-term and long-term memory in a single silicon device. I&F neuron circuit emulate the biological neuron characteristics such as integration, threshold triggering, output generation, and refractory period, using floating body MOSFET. The neuron circuit sends feedback signal to the synaptic transistor for long-term memory.

• 한국해안·해양공학회논문집
• /
• 제21권5호
• /
• pp.410-418
• /
• 2009

선형포텐셜이론을 가정하여 부분 반사 안벽 앞에 계류된 부유체의 동유체력과 운동응답을 해석할 수 있는 경계요소법을 개발 적용하였다. 동유체력인 부가질량과 감쇠계수는 부유체의 잠긴깊이와 안벽에서의 반사율 그리고 부유체와 안벽사이의 떨어진 거리에 밀접한 관련이 있다. 특히 안벽에서의 반사율은 안벽과 부유체사이의 제한유체영역내에서 발생하는 공진현상에 의하여 증폭된 운동변위의 피크값을 줄이는 등 운동응답에 중요한 영향을 미친다. 개발된 수치해석법은 부유체의 형상, 입사각, 안벽의 속성, 입사파의 특성 등의 변화에 따른 부유체의 운동성능을 평가하는데 이용될 것이며, 또한 항만내 계류된 선박의 운동특성을 고려한 항만설계의 기초자료로 활용 될 것이다.

• 해양환경안전학회지
• /
• 제29권4호
• /
• pp.407-416
• /
• 2023

해양레저활동 인구증가 및 관련 산업의 급성장으로 인해 레저 선박을 접안하는 계류시설과 부유체를 기반으로 하는 해상부유식 펜션 등 레저시설 수요가 증가하고 있으며, 이러한 연안에서 사용되는 부유체는 대부분 경량 부유체로서 중량이 상대적으로 경량이므로 연안으로 유입되는 파(Wave)와 상재 하중에 의해 쉽게 경사가 발생하여 안정성이 낮아 안전사고가 빈번히 발생하고 있다. 이런 문제점에 대한 해결방안으로 부유체의 운동저감장치를 연구하여 알리고자 한다. 본 연구논문에서는 부유체에 운동저감장치(기압차를 이용한 운동저감장치)를 부착하여 운동저감효과를 부착하지 않은 부유체와 비교하는 방식으로 효과를 분석하였다. 효과분석은 전산해석시험으로 분석하여 부유체의 안정성 증가방법을 연구하고 그 효과를 검증해 보았다. 시험결과 분석결과 기압차를 이용한 운동저감장치를 부착한 부유체가 운동저감장치를 부착하지 않은 부유체보다 파랑에 대한 운동량이 저감되어 부유체의 안정성이 증가된 것으로 분석되었다. 이러한 부유체의 운동저감 장치는 무동력 선박뿐만 아니라 동력선, 반잠수식 선박에서도 유용하게 사용될 것으로 판단되어 다양한 분야에 적용하여 연구를 진행할 계획이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권3호
• /
• pp.277-300
• /
• 2016

The motion of a floating body and the free surface flow are the most important design considerations for ships and offshore platforms. In the present research, a numerical method is developed to simulate the motion of a floating body and the free surface using a fixed rectilinear grid system. The governing equations are the continuity equation and Naviere-Stokes equations. The boundary of a moving body is defined by the interaction points of the body surface and the centerline of a grid. To simulate the free surface the Modified Marker-Density method is implemented. Ships advancing in regular waves, the interaction of waves by a fixed circular cylinder array and the response amplitude operators of an offshore platform are simulated and the results are compared with published research data to check the applicability. The numerical method developed in this research gives results good enough for application to the initial design stage.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.115-127
• /
• 2015

The aim of this study is to develop a simplified formula for added mass coefficients of a two-dimensional floating body moving vertically in a finite water depth. Floating bodies with various sectional areas may represent simplified structure sections transformed by Lewis form, and can be used for floating body motion analysis using strip theory or another relevant method. Since the added mass of a floating body varies with wave frequency and water depth, a correction factor is developed to take these effects into account. Using a developed two-dimensional numerical wave tank technique, the reference added masses are calculated for various water depths at high frequency, and used them as basis values to formulate the correction factors. To verify the effectiveness of the developed formulas, the predicted heave added mass coefficients for various wetted body sections and wave frequencies are compared with numerical results from the Numerical Wave Tank (NWT) technique.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1354-1359
• /
• 2004

This paper is concerned with the application of perturbation method to the dynamic analysis of floating flexible body. In dealing with the dynamics of free-floating body, the rigid-body motions and elastic vibrations are analyzed separately. However, the rigid-body motions cause vibrations and elastic vibrations also affect rigid-body motions in turn, which indicates that the rigid-body motions and elastic vibrations are coupled in nature. The resulting equations of motion are hybrid and nonlinear. We can discretize the equations of motion by means of admissible functions but still we have to cope with nonlinear equations. In the previous paper, we proposed the use of perturbation method to the coupled equations of motion and derived zero-order and first-order equations of motion. The derivation process was lengthy and tedious. Hence, in this paper, we propose a new approach to the same problem by applying the perturbation method to the Lagrange's equations, thus providing a systematic approach to the addressed problem. Theoretical derivations show the efficacy of the proposed method.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.80-92
• /
• 1994

The dynamic response characteristics of a floating ocean city are examined for presenting the basic data for the design of huge offshore structures supported by a large number of floating bodies in waves. The numerical approach which is accurate in linear system is based on combination of a three dimensional source distribution method, wave interaction theory and the finite element method of using the space frame element. The hydrodynamic interactions among the floating bodies are taken into account in their exact form within the context of linear potential theory in the motion and structural analysis. The method is applicable to an arbitrary number of three dimensional bodies having any individual body geometries and geometrical arrangement with the restriction that the circumscribed, bottom-mounted. Imaginary vertical cylinder for each body does not contain any part of the other body. The validity of this procedure was verified by comparing with experimental results obtained in the literature.

• Ocean Systems Engineering
• /
• 제5권3호
• /
• pp.221-243
• /
• 2015

This paper compares simplified and finite element method (FEM) models for tower and blade in dynamic coupled analysis of floating wind turbine. A SPAR type wind turbine with catenary mooring lines is considered in numerical analysis. Floating body equation is derived using boundary element method (BEM) and convolution. Equations for mooring line, tower and blade are formulated with theories of catenary, elastic beam and aerodynamic rotating beam, respectively and FEM is applied in the formulation. By combining the equations, coupled solutions are calculated. Tower or blade may be assumed rigid or lumped body for simplicity in modeling. By comparing floating body motions, mooring line tensions and tower stresses with the simple model and original FEM model, the effect of including or neglecting elastic, rotating and aerodynamic behavior of tower and blade is discussed.