• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.616-624
• /
• 2019

In order to understand flying aircraft, satellite, missile, etc, a telemetry ground system is used to receive, record, and process the transmitted radio signal from vehicles. In some cases, a line-of-sight communication is not possible along to the trajectory of vehicles, and multipath fading result in a shade area of communication. A number of telemetry ground systems are installed to overcome this limitation, and acquire the transmitted signal seamlessly. The telemetry signals received by multiple independent ground systems have independent probability of errors since they experienced their own communication channels. In other words, we can exploit the independent error characteristics of received signals by processing them in a hybrid method. The optimum hybrid post-process method is proposed in this study, and applied to process telemetry signals acquired from flight tests.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.883-890
• /
• 2021

In this study, joint analysis was conducted on the rock slope by aerial surveying using UAV. Aerial photos were taken using UAV to measure the directionality of the rock slope exposed to the site, and the directionality of the joint was analyzed using the photographed photos. UAV photography was taken under conditions of 90% overlap and an altitude of 50m. The photographing path was measured in the horizontal, vertical, and oblique directions based on the slope, and the joint characteristics were analyzed. Aerial surveying research on the joint directionality analysis of rock slopes is still incomplete, and the method for accurate joint directionality analysis is not presented strategically, so it is difficult to apply it in design. Through the results of this study, we would like to propose an flight photographing technique for the investigation of rock joints. As a result of the study, in the case of the joint investigation of the rock slope using UAV, it was necessary to change conditions such as altitude, aerial photography route, and overlap according to the size of the joint according to the site conditions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.3
• /
• pp.157-163
• /
• 2019

As the drone industry has grown greatly in recent years, drones are being used or developed in many industrial fields such as image shooting, pesticide application, delivery service, food delivery etc. In this paper, therefore, we developed a program that takes a user's desired area at a certain height using a camera-equipped drone and obtains the area of the zone the user wants through image processing. The first user selects an area or a path. Afterwards, the drone flies and takes pictures, and then measures the user's needs. A digital image taken at a constant height and with the same resolution is composed of pixels, the area can be calculated easily if we know the number of pixels in the zone the user wants. Particularly, it is easy to calculate the area of various shaped zones, not terrain shapes such as triangles and squares. In addition, the total area of specific places of the entire zone can be calculated. With the program of this paper, anyone can easily calculate the area of the place the user wants using a drone rather than calculating the area through difficult formulas or specialized equipment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.4
• /
• pp.315-320
• /
• 2021

Carbon-ion radiotherapy (CIRT) is on the rise as a treatment choice for malignant tumor. Compared to conventional radiotherapy, particle beams have different physical and biological properties. Particle beam provides a low entry dose, deposits most of the energy at the endpoint of the flight path, and forms an asymptotic dose peak (the "Bragg peak"). Compared to protons, carbon with its larger mass decreases beam scattering, resulting in a sharper dose distribution border. We report a 50-year-old male who underwent CIRT without surgical resection on osteosarcoma of the mandible. After CIRT, the patient's pain was gone, and the malignant mass remained stable with accompanying necrosis. Nine months later, however, magnetic resonance imaging demonstrated progression of the left mandibular osteosarcoma with pulmonary metastases. After multidisciplinary discussion, concurrent chemoradiotherapy was conducted. While necrotic bone segments came out of the mandible during subsequent periodic outpatient visits, the tumor itself was stable. Thirty months after his first visit and diagnosis, the patient is waiting for chemotherapy. Although CIRT is superior in treating radioresistant hypoxic disease, CIRT is in its infancy, so care must be taken for its indications and complications.

• Smart Structures and Systems
• /
• v.29 no.4
• /
• pp.617-624
• /
• 2022

A new intelligent adaptive control scheme was proposed that combines the control based on interference observer and fuzzy adaptive s-curve for flight path tracking control of unmanned aerial vehicle (UAV). The most important contribution is that the control configurations don't need to know the uncertainty limit of the vehicle and the influence of interference is removed. The proposed control law is an integration of fuzzy control estimator and adaptive proportional integral (PI) compensator with input. The rated feedback drive specifies the desired dynamic properties of the closed control loop based on the known properties of the preferred acceleration vector. At the same time, the adaptive PI control compensate for the unknown of perturbation. Additional terms such as s-surface control can ensure rapid convergence due to the non-linear representation on the surface and also improve the stability. In addition, the observer improves the robustness of the adaptive fuzzy system. It has been proven that the stability of the regulatory system can be ensured according to linear matrix equality based Lyapunov's theory. In summary, the numerical simulation results show the efficiency and the feasibility by the use of the robust control methodology.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.1
• /
• pp.18-25
• /
• 2023

In recent years, UAM (Urban Air Mobility) has emerged as a solution to these urbanization problems, and many related reports and diverse prospects have been reported. UAM flights are planned to take off and land at a Vertiport located in the city center and fly along a pre-established corridor. In order for UAM to operate safely in the city center, it must ensure a safe flight path that avoids the buildings in the city center and many surrounding obstacles. Therefore, in this study, we compared and examined the installation standards of the obstacle limitation surface necessary for UAM to take off and land safely at the Vertiport. First, we analyzed the helicopter obstacle limitation surfaces in Japan and overseas, and the UAM Vertiport installation standards and obstacle limitation surface application standards recently announced at the FAA and EASA. It identified differences and similarities between heliport and Vertiport, and considered improvements to domestic helicopter obstacle limitation surfaces and criteria that could meet FAA and EASA standards.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.46-54
• /
• 2023

Helicopter pilots are required to perform many visual workloads in topographical avoidance, flight path modification and navigation, because helicopters operate at very low altitudes. The helicopter-specific instability also require the pilot to have precise perception and control. This has caused frequent human error in helicopter accidents. In Korea, two to three cases have occurred annually on average over the past 10 years, and this trend has not decreased. The purpose of this study was to identify human error risks in advance to prevent helicopter accidents and to help develop measures for missions and mission phases with high risk of human error. Through the study, the tasks and mission phases where accidents occur frequently were classified and the risk of human error was calculated for each mission phases. To this end, the task of frequent accidents during helicopter missions was first identified, detailed steps were classified, and the number of accidents was analyzed. Next, the AHP survey program was developed to measure the pilot's risk of human error and the survey was conducted on the pilots. Finally, the risk of human error by helicopter mission and by mission phases calculated and compared with the actual number of accidents.

• Korean Journal of Artificial Intelligence
• /
• v.12 no.2
• /
• pp.17-23
• /
• 2024

Various methods have been developed to predict the flight path of an air-launched weapon to intercept a fast-moving target in the air. However, it is also getting more challenging to predict the optimal firing zone and provide it to a pilot in real-time during engagements for advanced weapons having new complicated guidance and thrust control. In this study, a method is proposed to develop an optimized weapon engagement zone by the SCG (Scaled Conjugate Gradient) algorithm to achieve both accurate and fast estimates and provide an optimized launch display to a pilot during combat engagement. SCG algorithm is fully automated, includes no critical user-dependent parameters, and avoids an exhaustive search used repeatedly to determine the appropriate stage and size of machine learning. Compared with real data, this study showed that the development of a machine learning-based weapon aiming algorithm can provide proper output for optimum weapon launch zones that can be used for operational fighters. This study also established a process to develop one of the critical aircraft-weapon integration software, which can be commonly used for aircraft integration of air-launched weapons.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.437-447
• /
• 2020

The purpose of this study is to research the countermeasures and expected effects through the use of drones in the field of disaster prevention as a drone-based smart quarantine performance method. The environmental, market, and technological approaches to the review of the current quarantine performance task and its countermeasures are as follows. First, in terms of the environment, the effectiveness of the quarantine performance business using drone-based control is to broaden the utilization of forest, bird flu, livestock, facility areas, mosquito larvae, pests, and to simplify and provide various effective prevention systems such as AI and cholera. Second, in terms of market, the standardization of livestock and livestock quarantine laws and regulations according to the use of disinfection and quarantine missions using domestic standardized drones through the introduction of new technologies in the quarantine method, shared growth of related industries and discovery of new markets, and animal disease prevention It brings about the effect of annual budget savings. Third, the technical aspects are (1) on-site application of disinfection and prevention using multi-drone, a new form of animal disease prevention, (2) innovation in the drone industry software field, and (3) diversification of the industry with an integrated drone control / control system applicable to various markets. (4) Big data drone moving path 3D spatial information analysis precise drone traffic information ensures high flight safety, (5) Multiple drones can simultaneously auto-operate and fly, enabling low-cost, high-efficiency system deployment, (6) High precision that this was considered due to the increase in drone users by sector due to the necessity of airplane technology. This study was prepared based on literature surveys and expert opinions, and the future research field needs to prove its effectiveness based on empirical data on drone-based services. The expected effect of this study is to contribute to the active use of drones for disaster prevention work and to establish policies related to them.