• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.633-643
• /
• 2005

An unmanned aerial vehicle (UAV) is an aircraft controlled by .emote commands from ground station and/o. pre-programmed onboard autopilot system. A navigation system in the UAV provides a navigation data for a flight control computer(FCC). The FCC requires accurate and reliable position, velocity and attitude information for guidance and control. This paper proposes an ADGPS/INS integrated navigation system for a UAV. The proposed navigation system comprises an attitude determination GPS (ADGPS) receive., a navigation computer unit, and a low-cost commercial MEMS inertial measurement unit(IMU). The navigation algorithm contains a fault detection and isolation (FDI) function fur integrity. In order to evaluate the performance of the proposed navigation system, two flight tests were preformed using a small aircraft. The first flight test was carried out to confirm fundamental operation of the proposed navigation system and to check the effectiveness of the FDI algorithm. In the second flight test, the navigation performance and the benefit of the GPS attitude information were checked in a high dynamic environment. The flight test results show that the proposed ADGPS/INS integrated navigation system gives a reliable performance even when anomalous GPS data is provided and better navigation performance than a conventional GPS/INS integration unit.

• 한국항공우주학회지
• /
• 제33권3호
• /
• pp.71-77
• /
• 2005

일반적으로 무인항공기는 비행 전에 계획된 비행항로나 운용자의 실시간 통제에 따라 임무를 수행한다. 성공적으로 임무를 완수하려면 무인항공기와 지상통신장비 간의 통신 가시선 분석 등이 필수적으로 요구된다. 본 논문은 무인항공기의 안전한 비행을 위해 지상통제장비가 임무계획 단계와 임무통제 단계에서 수행하는 여러 가지 분석 기법들을 제안한다. 제안된 기법들은 대부분의 무인항공기 체계에 적용될 수 있다.

• 한국항공운항학회지
• /
• 제25권4호
• /
• pp.170-176
• /
• 2017

In recent years, Unmanned Aerial Vehicles (UAVs) were actively developed in various fields. In development process of UAVs, flight test is performed to ensure that minimum safety requirements and technical requirements are met. By constructing flight test infrastructure such as takeoff and landing facilities, operation procedure, and equipments, flight test can be performed effectively. In this paper, operation procedures of civil UAV's flight test are proposed. The procedures proposed are composed by two main steps: first, planning and permitting procedure of flight test. Secondly, execution and control procedure of flight test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1296-1299
• /
• 1996

This paper proposes a design automation method for the flight control system of an aircraft based on optimization. The control system design problem which has many specifications is formulated as multi-objective optimization problem. The solution of this optimization problem should be considered in terms of Pareto-optimality. In this paper, we use an evolutionary algorithm providing numerous Pareto-optimal solutions. These solutions are given to a control system designer and the most suitable solution is selected. This method decreases tasks required to determine the control parameters satisfying all specifications. The design automation of a flight control system is illustrated through an example.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1123-1131
• /
• 1993

본 논문에서는 비행체의 사이드슬립(sideslip)의 변화를 최소로 하면서 롤(roll) 및 요(yaw) 운동을 제어하는 것을 제어목표로 하여, 입출력 갯수가 같은 정방(square)시스템과 입출력 갯수가 다른 비정방(nonsquare)시스템에 대하여 LQG/LTR 및 비례 재어기를 각각 설계하여 그 성능을 비교분석한다.

• 대한전기학회논문지
• /
• 제37권3호
• /
• pp.171-179
• /
• 1988

본 논문은 MRAC방식을 이용하여 비행체 조종장치의 제어기 설께에 관하여 다루었다. 적응제어 시스템의 구성은 NARENDRA와 VALAVANI가 제안한 구조를 토대로 하여 프랜트의 상대차수가 $n^{*}=2$인 경우에 대하여 고찰하였다. 비행체 조종장치는 단일 입.출력을 갖는 제어시스템으로 근사화하였고, 제어입력은 기준모델과 프랜트의 입.출력관계로부터 얻는다. 설계된 제어시스템의 타당성을 검토하기 위하여 프랜트가 애널로그 모델인 경우롸 비행자세를 나타내줄 수 있는 비행운동테이블을 포함하는 각각의 경우에 대하여 시뮬레이션하였고, 그 결과 검토하였다.

• Composites Research
• /
• 제36권3호
• /
• pp.211-216
• /
• 2023

선박, 항공기 구조물을 설계할 때 경량화 및 강도를 만족할 수 있도록 설계하는 것은 중요하다. 현재, 경량화와 구조물의 강도를 만족시키기 위한 방법으로 3D 프린트 복합재료를 이용한 위상 최적화에 관련된 연구가 활발히 이루어지고 있다. 본 연구에서는 항공기 또는 무인기의 부품 중 하나인 조종면에 대한 3D 프린트 복합재료의 적용 가능성을 분석하기 위해 구조해석을 수행했다. 조종면의 내부 위상 형상에 대해 3가지(육각형, 사각형, 삼각형) 형상을 고려하여 굽힘 하중에 대한 조종면의 최적의 위상 형상을 분석하였다. 또한 3D 프린트 복합재료의 4가지 강화재(탄소섬유, 유리섬유, 고강내열유리섬유, 케블라)를 적용했을 때의 조종면의 굽힘 강도를 분석하였다. 3점 굽힘 실험결과와 구조해석 결과를 비교한 결과, 탄소섬유와 케블라로 제작된 육각형의 위상 형상을 갖는 조종면이 우수한 성능을 갖는 것을 확인하였다. 이를 통해 조종면에 대해 3D 프린트 복합재를 충분히 적용 가능할 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1684-1687
• /
• 1997

A dynamic load simulator which can reproduce on-ground the hinge moment of aircraft control surface is and essential rig for the loaded performance test of aircraft test of aircraft acutation system. The hinge moment varies wide in the aricraft flight enveloped depending on specific flight condition and maneuvering status. To replicate the wide spectrum of this hinge moment variation within some accuracy bounds, a force controller is designed based on the Quantiative Feedback Theory (AFT). Through the analysis on hinge moment dynamics, a design specification for the force controller is suggested. The efficacy of QFT force controller is verivied by simulation, in which combined aricraft dynamics/flight control law and hydraulic actuation system dynamics of aircraft control surface are considered.

• 제어로봇시스템학회논문지
• /
• 제9권2호
• /
• pp.99-106
• /
• 2003

A new reconfigurable model following flight control method based on direct adaptive scheme is presented. Using the timescale separation principle, both the inner-loop and the outer-loop states are controlled simultaneously. For the timescale separation assumption to be satisfied, the inner-loop model dynamics is set to be fast whereas the outer-loop model dynamics is set to be relatively slow. The stability and convergence of the proposed control law is proved by Lyapunov theorem. One of the merits of the proposed reconfigurable controller is that the FDI process and the persistent input excitation are not necessary, which is suitable for the flight control system. To evaluate the reconfiguration performance of the proposed control method, numerical simulation is performed using six degree-of-freedom nonlinear dynamics.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1074-1080
• /
• 2015

In the last decades, the increasing interest in unmanned aerial vehicle(UAV) for military, surveillance, and rescue applications made necessary the development of flight control theory and body structure more and more efficient and fast. In this paper, we describe the design and performance of a prototype hexarotor UAV platform featuring an inertial measurement unit(IMU) based autonomous-flying for use in bluetooth communication environments. The proposed system comprises the construction of the test hexarotor platform, the implementation of an IMU, dynamic modeling and simulation in the hexarotor helicopter. Furthermore, the hexarotor helicopter with implemented IMU is connected with a micro controller unit(ARM-cortex) board. The P-PD control algorithm was used to control the hexarotor. We used the Matlab software to help us to tune the P-PD control parameters for quick response and minimizing the fluctuation. The control simulation and experiment on the real system are implemented in the test platform, evaluated and compared against each other.