• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.707-714
• /
• 2000

본 논문에서는 PLL 시스템의 보다 실제적 분석 모델인 3차 시스템을 통하여 저주파 대역에서 문제가 되는 flicker noise가 어떠한 양상을 나타내는가를 알아보려 한다. 3차에서 해석의 복잡성으로 수학적인 분석이 난해하지만 최적화 된 2차 필터를 통한 pseudo-damping factor의 도입으로 3차 시스템에서의 flicker variance의 해석이 용이하도록 시도하였다. 3차에서의 flicker variance의 수식적인 유도를 보이고 이를 2차 시스템에서 발생되는 flicker noise에 대한 variance와 비교하려 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.230-235
• /
• 1999

본 논문에서는 PLL 시스템의 보다 실제적인 모델인 3차 시스템을 통하여 저주파 대역에서 문제가 되는 flicker noise가 어떠한 양상을 나타내는가를 알아보려 한다. 3차에서 해석의 복잡성으로 그 수학적 분석의 난해함을 나타내지만 최적화 된 2차 필터를 통한 pseudo -damping factor의 도입으로 전체적인 flicker variance의 해석이 용이하도록 시도하였다. 3차에서의 flicker variance의 수식적인 유도를 보이고 이를 2차 시스템에서 발생되는 flicker noise 에 대한 variance와 비교 하려한다

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1663-1667
• /
• 2011

Voltage variation caused by large loads such as arc furnace and large motors, which use the large and instantaneous currents, can cause the voltage flicker. The flicker irritates the human's eyes and also has an adverse effect on protection device, rotating machine and electronic device etc, therefore the flicker needs to be managed effectively. Recently, the Korea power quality standard has been established on the IEC standards. This paper presents the flicker management standard for distribution power system and suggests the flicker transfer coefficients for Korea power system based on the IEC 61000-3-7.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1017-1024
• /
• 2017

The International Electrotechnical Commission(IEC) 61000-4-15 is a standard proposing techniques for a flicker meter test and measurement method. The IEC61000-4-15 ed1 announced in 1997 was not include tests for accurate verification. Also it was not explained flicker meter algorithm that can be directly applied to the other power systems. But the new edition of IEC61000-4-15 ed2 prescribes a variety of tests for verify flicker meter algorithm and it explains 'correction factor' used for measuring flicker in other power systems. It can measure flicker severity in 220V system by multiplying correction factor to the measured values with the 230V algorithm. This paper compared the method of measuring flicker severity in korea power system using the correction factor and the modified weighting filter, after verifying of digital flicker meter algorithm created by using matlab based on IEC61000-4-15 ed2.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.95-97
• /
• 2007

Large area flicker is one of the most annoying image defects, and it is an inherent characteristic of impulsively driven displays such as CRTs. Recently, LCDs have also adopted impulsive driving methods for improved motion picture quality, therefore LCDs can also show large area flicker. Existing metrics do not account for the non-linearity of human brightness perception. This paper presents an improved large area flicker metric to more accurately quantify large area display flicker performance.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.391-393
• /
• 2005

This paper studies flicker evaluation considering power quality disturbance. A flicker problem with light device irritates human's eyes. Also, the flicker problem has an influence on adverse effect such as rolling device and rotating device. However, a study of flicker evaluation is not complete. A flicker is measured and evaluated at monitoring point. But we consider power quality disturbances such as voltage sag and transient that cause fault and inverter/breaker switching. Power quality disturbances affects flicker evaluation. A flicker evaluation index increases. Therefore, we consider power quality disturbances. We detect voltage sag and transient using wavelet and evaluate flicker without flicker index including power quality disturbances.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.376-379
• /
• 2006

This paper studies flicker evaluation considering power quality disturbance. A flicker problem with light device irritates human's eyes. Also, the flicker problem has an influence on adverse effect such as rolling device and rotating device. However, a study of flicker evaluation is not complete. A flicker is measured and evaluated at monitoring point. But we consider power qualify disturbances such as voltage sag and transient that cause fault and inverter/breaker switching. Power quality disturbances affects flicker evaluation. A flicker evaluation index increases. Therefore, we consider power quality disturbances. We detect voltage sag and transient using wavelet and evaluate flicker without flicker index including power quality disturbances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.72-74
• /
• 2004

Nowadays there are many kinds of large scale loads and they make the power quality deteriorated. As the uses of nonlinear loads increase, there are the influences on the other kinds of loads (mainly light loads) in the same distribution system. Especially the voltage variation by the loads which draw the large and instantaneous currents can cause the appreciable light flicker. This is called the voltage flicker or, briefly, the flicker. This paper deals with the digital and time domain algorithm of measuring flicker based on IEC 61000-4-15 and the real time measurement of flicker through the proposed power quality monitoring system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.310-312
• /
• 2002

The development of IEC 61400-21 provides firm basis for assessment of the impact of wind turbines on voltage quality. This paper presents analysis and modeling of the flicker emission of wind turbines. The paper concentrates on the theoretical aspects of the flicker algorithm, wind turbine characteristics and the generation of flicker during continuous operation of wind turbines. It also introduces a simplified assessment to limit the flicker emission.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.1-7
• /
• 2018

IEC 61000-3-7 provides guidance for limiting flicker and enabling the connection of fluctuating load installations, that is, producing flicker in MV, HV and EHV power systems. In Korea, the flicker have been restricted by Japanese standard of ${\Delta}V_{10}$ method. ${\Delta}V_{10}$ was developed only for arc furnaces in 1960's. And now it is revealed that it is not suitable for application to other fluctuating load installations through many researches. $P_{st}$ which is a flicker index used in IEC 61000-3-7, indicates visual inconvenience due to voltage fluctuation across large range of frequency and can be applied to fluctuating load installations as well as arc furnaces. In this paper, we introduce how to calculate and assess flicker emission level for the individual fluctuating load installations connected in EHV system and how to manage the emission levels in the power system according to IEC 61000-3-7.