• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.32-39
• /
• 2015

With the simplicity of process and high reliability in chip or package bonding, epoxy solder paste (ESP) has been recently considered as a competitive bonding material. The ESP material is composed of solder powder and epoxy formulation which can remove oxide layers on the surface of solder powder and pad finish metal. The bonding formed using ESP shows outstanding bonding strength and suppresses electrical short between adjacent pads or leads owing to the reinforced structure by cured epoxy after the bonding. ESP is also expected to suppress the formation and growth of whisker on the pads or leads. With the mentioned advantages, ESP is anticipated to become a spotlighted bonding material in the assembly of flexible electronics and electronic modules in automotive vehicles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.73-79
• /
• 2005

In this paper, a circuit for detecting a fine oscillation in an integrated PCS and W-CDMA receiver is presented. The advantages for this design are small size and flexible compatibility for system operation compared with the conventional method. The fine oscillation level can be detected by dB unit through selecting the receiver mode as PCS of 1.8 GHz range or W CDMA of 1.9 GHz range by a RF switch and monitoring the corresponding frequency band. Also, the circuit is designed to be flexible for other communication systems with the consideration of the required dynamic range of 75 dB.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.283-286
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator ,data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic -sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu micorprocessor applied to the control of flexible link system with the sensor fault problems in the error module fer exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.913-918
• /
• 2008

When developing railway vehicle system, investigation of the dynamical stability is essential as a virtual prototyping process. Not only the verification using the commercial analysis tools, systematic analysis using customized tools is also necessary, because these can give other points of view in stability, which is sometimes unable to evaluate in the former one. As a solver platform for customization, it is important to derive basic theory about flexible bodies and build flexible structure, which enables easy module insertion of user-created functions. In the paper, a flexible dynamic analysis system is developed, using absolute cartesian coordinate, modal coordinate and absolute nodal coordinate. Each coordinate system is verified by respective examples for every system. This solver system will play an important role for building the basic platform for analysis system, keeping pace with the concurrent development of the modules, such as wheel-contact force, constraints and user-defined force modules. Using the information from the analysis, the evaluation of the dynamic behavior of the train and its stability analysis will be available.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.361-362
• /
• 2016

Presented in this paper is the design of a high voltage switch module made up of MOSFETs, pulse transformers and their gate driver circuits compactly fitted onto a single PCB module. The ease by which the switch modules can be configured (series stacking and/or parallel stacking) to meet future load variations allows for flexible operation of this design. In addition, the detailed implementation of the gate driver circuit for reliable and easier switch synchronization is also described in this paper. The stored energy in the capacitor bank of a 15kV, 4.5kJ/s peak power capacitor charger was discharged using the developed high voltage switch, and by experimental results, the operation of the proposed circuit was verified to be effectively used as a switch for pulse discharging.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.158-161
• /
• 2003

KERI simulator is a analog simulator for power system at KERI power system division lab. It consist of many power system components, which are a 380V 5kVA generators, scale-downed transmission line modules, transformers, switches, PACTS(Flexible AC Transmission System) devices. As a FACTS device module, 20kVA TCSC(Thyristor Controlled Series Compensator) module was designed and implemented. In this paper, we present the design and implementation of TCSC control hardware for KERI simulator

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.232-235
• /
• 2005

ATM(Automated-Teller Machine) is a maching that receives and pays money directly. The gate module of an ATM separates forgeries from bills and changes the transfer direction of bills. In this paper, the dynamic behavior of the gate was analyzed numerically and experimentally. The moment of inertia of the gate lever, the suction force of the solenoid and the spring force were measured respectively. And the displacements of the plunger, the vibration of the bracket, the input voltage and current were measured experimentally. The measured dynamic behaviors were simulated numerically using SAMCEF program, which can accommodate the kinematics and vibrations of flexible bodies. Through the analysis, the design factors were found to make a fast and reliable new ATM machine.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.169-172
• /
• 2005

Tiny camera module using in modern cellular phone requires precise assembly processes. Higher camera resolution and more functions such as zoom lens make the number of camera parts bigger. As market grows rapidly, automatic assembly process is required. However, diverse product line and short life cycle make it difficult. To attack this, a flexible and expandable lens assembly system is proposed. For the fast manufacturing line formation, modular concept is adopted. Also each module is designed to have intelligence to save system formation time. The assembly system is built up on the standard flat-form which provides vibration free base, air and electric supply, controllers, etc. Futhermore, the assembly cell has the capability of handling tiny, thin, or transparent parts which are very difficult to align with vision.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.298-309
• /
• 1999

In this study, we attempt to solve the loading and scheduling problems of an FMS in an integrated manner. We propose an integrated approach and its solution methodologies which can fully exploit the flexibility of an FMS effectively and make decisions about tool allocation, machine selection, and job sequencing simultaneously. The proposed approach consists of two main modules : 'schedule generating module' which makes partial schedules and 'tool-allocation checking module' which investigates the feasibility of tool-allocation for unscheduled tasks. Utilizing two interacting modules, we can finally settle the loading and scheduling problems. Experimental results show that in most cases the proposed integrated approach outperforms existing hierarchical approaches in the scheduling performance and the computational time required. In addition to that, the difference between the two approaches tends to increase when the number of part types and the number of alternative machines increase and the tool constraints become tight. To conclude, the experimental results show that the proposed approach is a viable one for solving practical problems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.635-636
• /
• 2006

A knowledge-based system with CAD is widely used to implement a designer's know-how and a routine calculation within a system. An engineer needs to change several design parameters in an early design stage. However it is not easy to change the design parameters when it needs to update an existing model and data. In this paper, a module has been proposed to make it easy to change the design parameter so that the engineer can easily update and change the design model. Also a flexible interface of the module can easily add or extract the design knowledge.