• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.348-357
• /
• 2021

In this paper, the generalized hydrodynamic force and response of a flexible body are calculated at different reference coordinate systems. We generalize the equation of motion for a flexible body by using the conservation of momentum (Mei et al., 2005). To obtain the equations in the generalized mode, two different reference coordinates are adopted. The first is the body-fixed coordinate system by a rigid body motion. The other is the inertial coordinate system which has been adopted for the analysis. Using the perturbation scheme in the weakly-nonlinear assumption, the equations of motion are expanded up to second-order quantities and several second-order forces are obtained. Numerical tests are conducted for the flexible barge model in head waves and the vertical bending is only considered in the hydroelastic responses. The results show that the linear response does not have the difference between the two formulations. On the other hand, second-order quantities have different values for which the rigid body motion is relatively large. However, the total summation of second-order quantities has not shown a large difference at each reference coordinate system.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.54-62
• /
• 2021

This study has investigated the 3-D deflection characteristics of a flexible plate levitated by non-contact grippers using SPIV method. The measuring instrument consisted of a flexible plate located under four non-contact grippers and two cameras at the bottom of a transparent acrylic plate. Measurements were made on two materials (PVC and PC) for the plate with 50×50 cm2 area and 1 mm thickness. The deflection characteristics and flatness vary depending on the plate material, the gripper position and the air flow supplied to the gripper. For the material of PVC, the overall defection is convex. As the gripper position goes outward from the plate center, the upmost bending point also moves to the outside of the plate with the flatness increasing. However, the air flow rate does not affect the deflection pattern except for the small increase of flatness. For the material of PC, the shape of deflection changes from convex to concave as the gripper position goes out. The flatness is the highest at the point of transition from convex to concave, but the air flowrate has little effect on the flatness.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.87-94
• /
• 2001

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve this equation, coordinate partitioning method and constraint stabilization method are commonly used. The coordinate partitioning method divides the coordinate into independent and dependent coordinates. The most typical coordinate partitioning method arc LU decomposition, QR decomposition, projection method and SVD(sigular value decomposition).The objective of this research is to find a efficient coordinate partitioning method in flexible multibody systems and a hybrid decomposition algorithm which employs both LU and projection methods is proposed. The accuracy of the solution algorithm is checked with a slider-crank mechanism.

• 한국전산구조공학회논문집
• /
• 제18권4호통권70호
• /
• pp.385-393
• /
• 2005

본 논문에서는 기하학적으로 비선형인 유연한 Timoshenko 보의 대변위 운동방정식에 유한요소를 사용하여 정식화하였다. 비선형 구속방정식은 라그랑지 상수를 이용하여 운동방정식에 통합되었다. 정식화하는 과정과 수치해석에서 선형과 비선형 영향을 파악하였고, 코리올리스(Coriolis)힘과 회전자(Gyroscopic)힘의 효과는 관성력과 감쇠력과는 달리 일반적인 외력으로 간주하여 해석할 수 있었다. Newmark의 시간적분과 Newton-Raphson 반복법을 사용한 수치예제를 통해 정식화의 효용성을 보여주었다.

• 한국경영과학회지
• /
• 제30권1호
• /
• pp.43-54
• /
• 2005

A flexible assembly line (FAL) is a production system that assembles various parts in unidirectional flow line with many constraints and manufacturing flexibilities. In this research we deal with a FAL balancing problem with the objective of minimizing the maximum workload allocated to the stations. However, almost all the existing researches do not appropriately consider various constraints due to the problem complexity. Therefore, this study addresses a balancing problem of FAL with many constraints and manufacturing flexibilities, unlike the previous researches. We use a genetic algorithm (GA) to solve this problem. To apply GA to FAL. we suggest a genetic representation suitable for FAL balancing and devise evaluation method for individual's fitness and genetic operators specific to the problem, including efficient repair method for preserving solution feasibility. After we obtain a solution using the proposed GA. we use a heuristic method for reassigning some tasks of each product to one or more stations. This method can improve workload smoothness and raise work efficiency of each station. The proposed algorithm is compared and analyzed in terms of solution quality through computational experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1704-1707
• /
• 1997

In this work, position and vibratiion control of a two-link manipulator with one flexible link, which an unkoun but bounded payload mass and two pair of artificial muscle-type penumatic actuators, are investgated. A flexible link robot has advantages over a figid link robot in the sense that it is much safer when it cones into contact with its environment, including humans. Furthermore, for the sake of safety, it would be more desirabel if an actuator could deliver required force while maintaining proper compliance. An artificial muscle-type penumatic actuator is adequate for such cases. In this study, a controller based on singular perturbation method, adaptive and sliding mode contro, and .mu.-synthesis is developed. The effectiveness of the proposed control scheme is confirmed through simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1711-1716
• /
• 2004

This paper presents identification and control of a 10-m antenna via accelerometers and angle encoder data. Artificial Neural Networks can be used effectively for the identification and control of nonlinear dynamical system such as a large flexible antenna. Some identification results are shown and compared with the results of conventional prediction error method. And we use a neural network inverse model for control the large flexible antenna. In the neural network inverse model, a neural network is trained, using supervised learning, to develop an inverse model of the antenna. The network input is the process output, and the network output is the corresponding process input. The control results show the validation of the ANN approach for identification and control of the 10-m flexible antenna.

• 산업공학
• /
• 제22권1호
• /
• pp.10-16
• /
• 2009

In this paper, we propose an efficient search algorithm for finding an optimal schedule to minimize makespan, while avoiding deadlock situation in Flexible Manufacturing Systems (FMS) with finite capacity, in which each job needs to be processed in several job stages for completion. The proposed algorithm uses a modeling and control method based on Petri-net. Especially, we improve the efficiency of the search algorithm by using a priority rule and an efficient bounding function during the search procedure. The performance of the proposed algorithm is evaluated through a numerical experiment, showing that it holds considerable promise for providing an optimal solution efficiently comparing to past work.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.721-724
• /
• 2006

In the development of sheet-handling machinery, it is important to predict the static and dynamic behavior of the sheets with a high degree of reliability. Flexible media is very thin, very light and very flexible so it behaves geometric nonlinearity of large displacement and large rotation but small strain. In this paper, static and dynamic analyses of flexible media are performed by dynamic FEM considering geometric nonlinearity. Mass and tangent stiffness matrices based on the Co-rotational(CR) approach are derived and numerical simulations are performed by full Newton-Raphson(FNR) method and Newmark integration scheme.

• 소음진동
• /
• 제11권1호
• /
• pp.68-75
• /
• 2001

A method for actively controlling dynamic reaction forces in flexible structures subject to persistent excitations is presented. Since reaction forces are not directly measured in flexible structures, reaction forces are estimated by using the Kalman filter. The estimated reaction force is used as an error signal in the adaptive feedforward disturbance cancellation controller. In order to compensate the static effect of the truncated modes in the reaction forces, the residual flexibility matrix is used with the Kalman filter. The paper presents the formulation of the reaction forces in conjunction with the Kalman filter estimator and the adaptive feedforward controller. The results show that the dynamic reaction forces at its supports in a flexible beam test rir are well suppressed.