• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.27.2-27.2
• /
• 2011

Polymer electronics is the one of the most promising way to realize the flexible electronics and many studies made remarkable progress to achieve the improvement in performance of polymer electronics comparable to current silicon-based technology. PBTTT is conjugated semiconducting polymer with highly ordered, chain-extended crystalline microstructures and shows high field effect mobilities above 0.1 $cm^2/Vs$. We studied PBTTTs FETs phase and explored methods to control channel interface in various device structures. Especially, in PBTTTs' unique nano-ribbon phase, we could obtain high mobilities of up to 0.4 $cm^2/Vs$, which was not reached before. Alignment of PBTTTs film was carried out using zone casting and anisotropy of mobilities in parallel and perpendicular to the polymer chain direction was investigated. Optical anisotropy in aligned nano-ribbon PBTTT FETs was also studied using a polarized optical absorption.

• Korean Management Science Review
• /
• v.17 no.3
• /
• pp.161-180
• /
• 2000

The purpose of this paper is to propose an analytical model for evaluating Internet Web sites, that is comprehensive and flexible enough to accomodate different categories of Internet Web sites. This paper is intended to identify critical success factors of Internet Web sites to determine criteria for evaluating the Web sites, and use the criteria to develop a framework for comprehensive evaluation of Internet Web sites. The framework consists of eight categories, including design, business functions, trustworthiness, interface, technology, community, contents, and others. An empirical study designed to validated the framework has been conducted for each of the three Web site categories, including (1) information provision, (2) product sale, and (3) customer service. The results show that ‘content ’ is the most important for information provision Web sites, ‘trustworthiness’for product sale Web sites, and ‘design’ for customer service Web sites. The framework may be used not only as a tool to evaluate Internet Web sites, but also as a checklist to improve the quality of a Web site that is under development.

• Journal of Biomedical Engineering Research
• /
• v.14 no.4
• /
• pp.315-320
• /
• 1993

This paper deals with a subject for implementation of L+ayer 1 and Layer 2(LAPD) of ISDN user-network interface on the basis of CCITT recommandation I.411, I.412, I.441 (Q.921), I.450(Q.930) and I.451 (Q.931) for ultrasonic image transfer. For the implementa tion of LAPD protocol of ISDN in this study. PC-CARD based hardware(TA :Terminal Adopt) is proposed and operating system (PC-XINU) supporting the Multiprocessing is transplanted to it. As the Service Access Point(SAP) is accessed by using the port of XINU and Layers which consist of transmitting and receiving part are independantly processed for each other in this proposed system. It can be easy and flexible to implement LAPD protocol for the message transfer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.313-314
• /
• 2006

In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated Results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLED) application.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.335-341
• /
• 2003

Recently, the automotive industry is being developed rapidly. On this, a demand of high quality performance­test­machine is increased too. But it is progressive technology that must be combined hydraulic, mechanic and electronic technologies. To construct this system, the design of oil hydraulic circuit, interface skill between sensor and personal computer, data acquisition & display system and integrated control are very important skill. Moreover, reliable data is obtained with vacuum system and complex heat exchange system. Therefore, in this study, we designed a performance­test­machine by using above key technologies and we also made a integrated PC control system using personal computer which is more progressive and flexible method than PLC control.

• Steel and Composite Structures
• /
• v.2 no.5
• /
• pp.315-330
• /
• 2002

This paper proposes a model for analysing the non-linear behaviour of steel concrete composite beams prestressed by external slipping cables, taking into account the deformability of the interface shear connection. By assuming a suitable admissible displacement field for the composite beam, the balance condition is obtained by the virtual work principle. The solution is numerically achieved by approximating the unknown displacement functions as series of shape functions according to the Ritz method. The model is applied to real cases by showing the consequences of different connection levels between the concrete slab and the steel beam. Particular attention is focused on the limited ductility of the shear connection that may be the cause of premature failure of the composite girder.

• Electronics and Telecommunications Trends
• /
• v.4 no.1
• /
• pp.35-43
• /
• 1989

The evolution of telecommunications has raised the profile of many segments of the network that were not previously considered important. Until recently, basic telephony existed with the extension of passive cables without any particular user network interface. In the area of data communications, the introduction of flexible packet switching has allowed the network to evolve in a far more efficient manner. To overcome such separated network problems and business needs of both users and network providers, the integrated narrowband ISDN concept is being developed in most countries for implementation in the public switched telephone network (PSTN). The targets of ISDN, in my opinion, can be explained as follows : To the user, ISDN should provide the services at any time, at any place, through any media. To the business customer using PABX or LAN applications, ISDN should introduce customized services rapidly and also, ISDN should be developed by the modular hardware and software design approach in order for new services to be introduced rapidly and effectively. Software can be also developed by non-expert local staff to cater for adopting new user's service requirements immediately. Finally, ISDN will be able to increase business chances and benefit both users and operating companies.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.631-634
• /
• 1996

This paper describes an intelligent user interface to define simulation models from the process and resource models. It also explains an automatic program generator of discrete event simulation model for shop floor control in a flexible manufacturing system. Especially, the paper is focused on the design and development of methodology to automate simulation modeling from the system description. Describing a shop floor control system in simulation is not an easy task since it must resolve various decision problems such as deadlock resolution, part dispatching, resource conflict resolution, etc. The program generator should be capable of constructing a complete discrete simulation models for a multi-product and multi-stage flow shop containing the above mentioned problems.

• Spatial Information Research
• /
• v.5 no.1
• /
• pp.77-88
• /
• 1997

This paper presents the design and implementaion of an object-relational geographic information system. This system has been developed on top of a commercial object-relational database management system. It provides flexible spatial data model, spatial query language, visual user interface, and efficient spatial access methods(D0T) in which traditional primary-key access methods can be applied. We report on our design choices and describe the current status of Implementation. The conceptual model of the system is based on SDTS, and is mapped to the intemal obiect-oriented data model. Kevwords : object-oriented data model, GIS, spatial data model, spatial access method.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.379-386
• /
• 2003

The goal of this research is to develop a Heel/Side Laster and control GUI(Graphic User Interface) for adaptive manufacturing. For this purpose, we have analyzed the working sequences of heel/side laster, and developed a control program that will facilitate the machineries with functions that are suitable for adaptive manufacturing. We also made it possible to modify the gluing path with simple manipulation of CAD data. By providing a user-friendly GUI, we made it possible for unskilled workers use the system without difficulty. In addition, we have developed a flexible environment where the already available CAD data can be modified and saved with ease. Automatic feeding and path control algorithms for thermoplastic cement were also implemented. By using the Heel/Side Laster for adaptive manufacturing, we are able to achieve increased productivity and work efficiency while improving the quality of the product with self-diagnosis and fine adjustment function.