• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.44-50
• /
• 2019

CMP is the most critical process in the manufacture of silicon wafers, and the use of retaining rings, which are consumable parts used in CMP equipment, is increasingly important. Since the retaining ring is made of plastic, it is not only weak in strength but also has the problem of taking a long time for the flattening operation of the ring itself performed before the CMP process, and of the imbalance of force due to bolt tightening causing uneven wear. In order to solve this problem, the retaining ring and the insert ring are integrally used, and the flatness of the retaining ring may be affected depending on the material of the insert ring. Also, the residual stress generated in the manufacturing process of the insert ring may cause distortion of the ring, which may adversely affect the precision polishing. In this study, when the insert ring is made of Zn or STS304, the thickness variation and the flatness of the retaining ring are compared and, finally, the material removal rate is analyzed by polishing the wafer by the oxide CMP process. Through these experiments, the effects of the insert ring material on the polishing accuracy of the wafers were investigated.

• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.1-10
• /
• 2022

Field robots operate in various areas, including construction, agriculture, forestry and manufacturing. Typical tasks of field robots used in various areas include excavation, flattening, and demolition. Such tasks are often accomplished in narrow alleys or indoors. In the case of field robots, there is a limit to working in a small space. Thus, to compensate for these shortcomings, many field robots equipped with Tiltrotators have recently been observed. The advantages of Tiltrotator are improved task efficiency and reduced operating time by reducing unnecessary behavior. We need simulation models that can improve the ability of new people to work and simulate tasks in advance. Thus, in this paper, we developed a simscape-based simulation model and modeling of 6DOF systems for field robots equipped with Tiltrotator. Dynamic modeling of field robot 3D models using Simcape multibody and hydraulic systems of field robots using Simcape Hydraulics were modeled. We applied a PID controller to create a control system that operates along the input angle. Simulation results show that errors occur when comparing input and output angles, but overall, they move along input angles.

• 한국전문물리치료학회지
• /
• 제30권4호
• /
• pp.281-287
• /
• 2023

Background: The flexible flatfoot is characterized by a flattening of the foot arch due to excessive bodyweight. The use of shoe insoles or taping methods has been identified as effective in realigning the navicular or calcaneus bones and addressing supination in pronated feet. Objects: This study aimed to analyze the difference between the arch taping attachment method, introduced in a previous study, and a novel taping method designed to provide support to the inner aspect of the heel bone in cases of flexible flatfoot. Methods: A navicular drop test was performed to discriminate flexible flatfoot. To analyze the differences in pressure distribution during walking for each taping method, the subjects underwent testing in the barefoot state with no attachments. The procedure included a sequence of arch taping and heel taping. Subsequent analysis of pressure distribution during walking utilized the GaitRite^® system (GAITRite Gold, CIR Systems Inc.). Results: Arch taping and calcaneus taping significantly reduced the integrated pressure over time and peak pressure on the medial side of the midfoot for both feet compared to the barefoot state. Conclusion: The findings of this study suggest that supporting the inside of the heel through calcaneus taping, without direct stimulation to the longitudinal arch and navicular bone, is an effective intervention for flexible flatfoot.

• KSBB Journal
• /
• 제27권5호
• /
• pp.289-294
• /
• 2012

Resveratrol, natural polyphenol in grapes and red wine, is known to have the anti-proliferatory and anti-angiogenic effects in various cancer cells. In this study, we have investigated the effects of resveratrol in HT-29 colon cancer cells. Treatment of resveratrol in different concentrations and time inhibited proliferation of HT-29 colon cancer cells. We explored the effects of resveratrol on HT-29 colon cancer cell motility using a wound healing assay. In the absence of the resveratrol, the HT-29 cells are migrated along the edges of the wound and showed a large-scale migration, whereas dose- and time-dependent inhibition of cell flattening and spreading was observed in the presence of resveratrol. Resveratrol inhibited MMP-9 in a dose- and time-dependent on HT-29 colon cancer cells by Western blotting. In addition, resveratrol increased AMPK activity and decreased COX-2, VASP and VEGF expression. Treatment of compound C inhibited AMPK activity, however, the expression of VASP and COX-2 increased thus, COX-2 and VASP are modulated by AMPK. However treatment of celecoxib could not control AMPK activity but decreased VEGF expression. We suggest that resveratrol inhibits cell proliferation and migration through activation of AMPK and decreased COX-2, VASP and VEGF expression in HT-29 colon cancer cells.

• Journal of Radiation Protection and Research
• /
• 제48권2호
• /
• pp.100-106
• /
• 2023

Background: As breast tissue expanders consist of metallic materials in the needle guard and ferromagnetic injection port, irradiation can produce radioactivation. Materials and Methods: A CPX4 (Mentor Worldwide LLD) breast tissue expander was exposed using the Versa HD (Elekta) linear accelerator. Two photon energies of 6 and 10 MV-flattening filter free (FFF) beams with 5,000 monitor units (MU) were irradiated to identify the types of radiation. Furthermore, 300 MU with 10 MV-FFF beam was exposed to the CPX4 breast tissue expander by varying the machine dose rates (MDRs) 600, 1,200, and 2,200 MU/min. To assess the instantaneous dose rates (IDRs) solely from the CPX4, a tissue expander was placed outside the treatment room after beam irradiation, and a portable radioisotope identification device was used to identify the types of radiation and measure IDR. Results and Discussion: After 5,000 MU delivery to the CPX4 breast tissue expander, the energy spectrum whose peak energy of 511 keV was found with 10 MV-FFF, while there was no resultant one with 6 MV-FFF. The time of each measurement was 1 minute, and the mean IDRs from the 10 MV-FFF were 0.407, 0.231, and 0.180 μSv/hr for the three successive measurements. Following 10 MV-FFF beam irradiation with 300 MU indicated around the background level from the first measurement regardless of MDRs. Conclusion: As each institute room entry time protocol varies according to the working hours and occupational doses, we suggest an addition of 1 minute from the institutes' own room entry time protocol in patients with CPX4 tissue expander and the case of radiotherapy vaults equipped with a maximum energy of 10 MV photon beams.

• Journal of Periodontal and Implant Science
• /
• 제41권3호
• /
• pp.135-142
• /
• 2011

Purpose: The present study was performed to evaluate the effect of erbium-doped: yttrium, aluminium and garnet (Er:YAG) laser irradiation on sand-blasted, large grit, acid-etched (SLA) implant surface microstructure according to varying energy levels and application times of the laser. Methods: The implant surface was irradiated by the Er:YAG laser under combined conditions of 100, 140, or 180 mJ/pulse and an application time of 1 minute, 1.5 minutes, or 2 minutes. Scanning electron microscopy (SEM) was used to examine the surface roughness of the specimens. Results: All experimental conditions of Er:YAG laser irradiation, except the power setting of 100 mJ/pulse for 1 minute and 1.5 minutes, led to an alteration in the implant surface. SEM evaluation showed a decrease in the surface roughness of the implants. However, the difference was not statistically Significant. Alterations of implant surfaces included meltdown and flattening. More extensive alterations were present with increasing laser energy and application time. Conclusions: To ensure no damage to their surfaces, it is recommended that SLA implants be irradiated with an Er:YAG laser below 100 mJ/pulse and 1.5 minutes for detoxifying the implant surfaces.

• Journal of Preventive Medicine and Public Health
• /
• 제53권4호
• /
• pp.228-232
• /
• 2020

Coronavirus disease 2019 (COVID-19) is inflicting a brutal blow on humankind, and no corner of the world has been exempted from its wrath. This study analyzes the chief control measures and the distinctive features of the responses implemented by Korea and the United States to contain COVID-19 with the goal of extracting lessons that can be applied globally. Even though both nations reported their index cases on the same day, Korea succeeded in flattening the curve, with 10 752 cases as of April 28, 2020, whereas the outbreak skyrocketed in the United States, which had more than 1 million cases at the same time. The prudent and timely execution of control strategies enabled Korea to tame the spread of the virus, whereas the United States paid a major price for its delay, although it is too early to render a conclusive verdict. Information pertaining to the number of people infected with the virus and measures instituted by the government to control the spread of COVID-19 was retrieved from the United States Centers for Disease Control and Prevention and the Korea Centers for Disease Control and Prevention websites and press releases. Drawing lessons from both nations, it is evident that the resolution to the COVID-19 pandemic lies in the prudent usage of available resources, proactive strategic planning, public participation, transparency in information sharing, abiding by the regulations that are put into place, and how well the plan of action is implemented.

• 대한구순구개열학회지
• /
• 제10권2호
• /
• pp.67-74
• /
• 2007

After Tennison introduced a triangular flap method which, for the first time, preserved the Cupid's bow, Randall gave this method a sound mathematical basis. This method is also called as an inferior triangular cheiloplasty which is characterized by making a small triangular flap from the lateral border of cleft destined to be fitted into an incision on the medial side of cleft. He postulated that the height obtained was equal to the sum of the median of the two triangles used in the cheiloplasty. Using this technique, a 22 month-old male patient with incomplete unilateral cleft lip was corrected primarily. The deviation of the columella and flattening of the nostril on the cleft side were minimal. The operation was done under general anesthesia and patient was healed uneventfully. We tried to improve the symmetry and esthetic feature of philtrum, nostril sill, alar-facial groove, preventing the notch formation on the nostril floor, and to reconstruct the muscle sling in the upper part of lip. The shape of Cupid's bow was restored, and the symmetry of columella was regained as a result. In summary, the inferior triangular cheiloplasty is effective to correct the primary unilateral cleft lip, results in the restoration of favorable anatomy and function.

• 지능정보연구
• /
• 제10권1호
• /
• pp.1-11
• /
• 2004

원 영상을 처리하여 보다 강조된 영상을 얻는다는 것은 기존의 영상을 가공하여 이를 통하여 보다 낳은 결과를 얻기 위한 전처리의 중요한 한 부분이라고도 할 수 있다. 강조된 영상이라는 것은 단지 보기 좋은 영상만을 말하는 것이 아니고, 주어진 영상을 더 뚜렷하게 하는 것을 포함한다. 강조된 영상은 영상처리에 있어서 윤곽선 추출이나 영상 인식 등에 유용한 자료로 활용되기도 하는데, 특히 저 화질 영상의 경우에는 원 영상을 얼마만큼 잘 나타내느냐에 따라서 인식의 정도가 다르게 나타난다. 현재 강조된 영상을 얻는 알고리즘들은 다양한 종류의 영상에서 원하는 만큼의 뚜렷한 영상을 얻지 못하거나, 화질의 크기나 히스토그램의 집적도에 비례하여 많은 처리 시간을 필요로 하는 단점이 있다. 본 연구에서는 저 화질 영상뿐만 아니라 여러 가지 종류의 영상에 있어서 차후 사용될 영상의 본래 활용 목적에 적합하도록 강조하는 방법으로서 픽셀들이 히스토그램상에서 차지하는 분포도를 변경하는 방법을 제안한다. 즉, 영상에 있어서 히스토그램의 값을 역추적하면서 히스토그램 분포도를 수정 및 변경함으로써 원 영상의 화질을 개선하는 방법으로 제안한 방법의 경우에는 기존의 히스토그램 평활화 방법에 의한 결과 영상과 동일한 결과를 얻음과 동시에 그 처리시간에 있어서는 상당한 이익을 볼 수 있었다.

• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.227-237
• /
• 2008

STATEMENT OF PROBLEM: Zirconium oxide can be a substitute to titanium as implant materials to solve the esthetic problems of dark color in the gingival portion of implant restorations. PURPOSE: This study was performed to define attachment and growth behavior of osteoblast- like cells cultured on grooved surfaces of zirconium oxide and evaluate the genetic effect of zirconium oxide surfaces using the reverse transcriptase-polymerase chain reaction (RT-PCR). MATERIAL AND METHODS: MC3T3-E1 cells were cultured on (1) commercially pure titanium discs with smooth surface (T group), (2) yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) with machined surface (ZS group), and (3) Y-TZP with $100{\mu}m$ grooves (ZG group). Cell proliferation activity was evaluated through MTT assay and cell morphology was examined by SEM. The mRNA expression of Runx2, alkaline phosphatase, osteocalcin, TGF-${\beta}1$, IGF-1, G3PDH in E1 cells were evaluated by RT-PCR. RESULTS: From the MTT assay, after 48 hours of adhesion of MC3T3-E1 cells, the mean optical density value of T group and ZG group significantly increased compared to the ZS group. SEM images of osteoblast-like cells showed that significantly more cells were observed to attach to the grooves and appeared to follow the direction of the grooves. After 24 hours of cell adhesion, more spreading and flattening of cells with active filopodia formation occurred. Results of RT-PCR suggest that T group, ZS group, and ZG group showed comparable osteoblast-specific gene expression after 24 hours of cell incubation. CONCLUSION: Surface topography and material of implants can play an important role in expression of osteoblast phenotype markers. Zirconia ceramic showed comparable biological responses of osteoblast-like cells with titanium during a short-time cell culture period. Also, grooves influence cell spreading and guide the cells to be aligned within surface grooves.