Browse > Article
http://dx.doi.org/10.14775/ksmpe.2019.18.8.044

Effects of Insert Materials of Retaining Ring on Polishing Finish in Oxide CMP  

Park, Ki-Won (Department of Mechanical Engineering, Graduate School, Incheon National University)
Park, Dong-Sam (Department of Mechanical Engineering, Incheon National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.18, no.8, 2019 , pp. 44-50 More about this Journal
Abstract
CMP is the most critical process in the manufacture of silicon wafers, and the use of retaining rings, which are consumable parts used in CMP equipment, is increasingly important. Since the retaining ring is made of plastic, it is not only weak in strength but also has the problem of taking a long time for the flattening operation of the ring itself performed before the CMP process, and of the imbalance of force due to bolt tightening causing uneven wear. In order to solve this problem, the retaining ring and the insert ring are integrally used, and the flatness of the retaining ring may be affected depending on the material of the insert ring. Also, the residual stress generated in the manufacturing process of the insert ring may cause distortion of the ring, which may adversely affect the precision polishing. In this study, when the insert ring is made of Zn or STS304, the thickness variation and the flatness of the retaining ring are compared and, finally, the material removal rate is analyzed by polishing the wafer by the oxide CMP process. Through these experiments, the effects of the insert ring material on the polishing accuracy of the wafers were investigated.
Keywords
Oxide CMP; Retaining Ring; Insert Ring; Flatness;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Sudargho, F., Han, R. and Philipossian, A., "Effect of Retaining Ring Slot Designs, Conditioning Discs and Conditioning Schemes on the Slurry Bow Wave Width during Chemical Mechanical Planarization," ECS Journal of Solid State Science and Technology, Vol. 7, pp. 253-259, 2018.
2 Park, J. W., Shin, C. M., Kim, T. S. and Qin, H. Y., "Optimal shape of retainer ring considering edge exclusion and slurry film thickness," Planarization/CMP Technology, 2015 International Conference, pp. 1-2, Sept. 2015.
3 Suzuki, N., Hashimoto, Y., H. Yasuda, Yamaki, S. and Mochizuki, Y., "Prediction of polishing pressure distribution in CMP process with airbag type wafer carrier," CIRP Annals-Manufacturing Technology, Vol. 66, pp. 329-332, 2017.   DOI
4 Park, I. H., Lee, D. S., Jeong, S. H. and Jeong, H. D., “Effects of Temperature on Removal Rate in Cu CMP,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 6, pp. 91-97, 2018.   DOI
5 Diaz, G., Sampurno, Y. and Philipossian, A., “Insights into the Tribological and Kinetic Attributes of Retaining Rings in Chemical Mechanical Planarization,” ECS journal of solid state science and technology, Vol. 7, No. 9, pp. P447-451, 2018.   DOI
6 Park, Y. B., Lee, H. S., Lee, Y. K., Park, S. J. and Jeong, H. D., "Effect of Contact Angle between Retaining Ring and Polishing Pad on Material Removal Uniformity in CMP Process," International journal of precision engineering and manufacturing, Vol. 14, No. 9, pp. 1513-1518, 2013.   DOI
7 Won, J. K., Lee, E. S. and Lee, S. G., “The Study on the Wafer Surface and Pad Characteristic for Optimal Condition in Wafer Final Polishing,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 26-32, 2012.
8 Khannaz, A. J., Kakireddy, R., Jawali, P., Chockalingam, A., Redfield, D., Bajaj, R., Fung, J., Cornejo, M., Yamamura, M., Yuan, Z., Orilall, C., Fu, B., Ganapathi, G., Redeker, F. C. and Patibandla., N. B., "Impact of Pad Material Properties on CMP Performance for Sub-10nm Technologies," ECS Journal of Solid State Science and Technology, Vol. 8, pp. 3063-3068, 2019.   DOI
9 Bae, J. H., Lee. H. S., Park, J. H., Nishizawa, H., Kinoshita, M. and Jeong, H. D., “Effect of Pad Thickness on Removal Rate and Within Wafer Non-Uniformity in Oxide,” Journal of the Korean Institute of Electrical and Electronic Material Engineers, Vol. 23, No. 5, pp. 358-363, 2010.   DOI
10 Yerriboina, N. P., Kwon, T. Y., Kim, I. K., Kim, I. G. and Park, J. G., "Generation of Pad Debris during Oxide CMP Process and Its Role in Scratch Formation," Journal of The Electrochemical Society, Vol. 158, No. 4, H394-H400, 2011.   DOI
11 Lee, H. J. and Jeong, H. D., “Analysis of Removal Mechanism on Oxide CMP using Mixed Abrasive Slurry,” International journal of precision engineering and manufacturing, Vol. 16, No. 3, pp. 603-607, 2015.   DOI
12 CNUS Co., LTD., Insert ring for retainer ring structure in chemical-mechanical polishing apparatus, PCT/KR2013/006119, 2013.
13 STRASBAUGH, CMP retaining ring with soft retaining ring insert, US-0295013, 2014.