• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.467-475
• /
• 2012

In this study, the problems were analyzed that derived a different position evaluation results depending on the unit grid size that are applied to the terrain slope analysis conducted to assess the its position and environmental impacts in the prior environment reviewing process of golf course construction projects. For this purpose, the unit grid size were analyzed that can precisely reflect a actual terrain by analyzing the change of a slope percentage according to the change of unit grid size about 12 golf courses is currently in progress of construction work through the environmental consultation or ongoing consultation. And the consultation availability of environmental assessment was reverified by applying the unit grid size derived through this study about a study golf course. In the result of study, the bigger grid size for slope analysis is set, the greatly gradient is changed and the slope ratio of the higher elevation was lowly evaluated in comparison with actual terrain. The analytical result that most closely match the actual terrain was extracted in the case applied $5m{\times}5m$ of the unit grid sizes setting in this study. So, we proposed this study results to the ministry of environment and could be amended the unit grid size of $5m{\times}5m$ as standard for the analysis of slope. Also, if new grid size for site evaluation is applied to the study sites, 4 sites exceed the standard suggested the existing regulations and they are not proper as golf course site in flank of environment.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.232-237
• /
• 2004

This study was carried out to evaluate the microbiological quality of beef carcasses at different slaughtering process in large (>100 cattle/day) and small (<30 cattle/day) scale slaughtering houses. Swabbing method was used to analyze the incidence of microorganisms on brisket surface of beef carcasses in each process of after dehiding, after evisceration, before and final wash, and in cold room. In winter time, large scale slaughterhouse showed lower incidence of aerobic microorganisms (10$\^$0/∼10$^2$ CFU/$\textrm{cm}^2$) than those of small scale slaughterhouse (10$\^$0/-10$^3$ CFU/$\textrm{cm}^2$) during the slaughtering process of after dehiding, evisceration and before final wash. But samples from carcasses after final wash and in cold room storage showed no difference in aerobic cell counts between large and small scale slaughterhouse. In spring time, samples showed higher incidence of microorganisms by the log scale 1 than those of winter time in both of small and large scale slaughterhouse. After final wash, different sampling place in carcass such as rump, flank, brisket showed the different washing effect in both of small and large scale slaughterhouse. After final wash, samples from rump showed lower aerobic cell counts, but samples from flank and brisket showed higher aerobic cell counts than samples from each site before final wash.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.131-137
• /
• 2018

The two recent excavations at the site of Beopsusa Temple in Seongju revealed that it contained eight building remains, three pedestrian facilities, four drainage facilities, two walls, three embankments, and an estimated pagoda remain. Even though this investigation was restricted to some sections of the site, it confirmed remains of architectural significance and thus attracted the attention of concerned researchers. This study thus set out to make an architectural survey of the site based on the excavation results and examine the characteristics and nature of remains of Buildings No.2 and 3 at the site. The planar analysis results show that Building No.2 (Remains 2-2) at the site of Beopsusa Temple was a gable-roofed building with a single story including 6 kan(間) in the front and 4 kan(間) in the flank and that Building No.3 (Remains 3-3) was a single-story building with a hipped-and-gable roof including 5 kan(間) in the front and 3 kan(間) in the flank. The most noteworthy remain of this excavation was the north-south square platform discovered at the Building No.2 at the site. It is estimated as a high chair platform used for Buddhist sermons. It was confirmed only at the lecture hall remains of Hwangnyongsa Temple and Anyangsa Temple in the nation and had never been found at remains related to Chinese and Japanese Buddhist Temples, being regarded as a very important and unique artifact. Since it was found at the remains of Building No.2, they was estimated as the lecture hall remain at the site. Found at the remains of Building No.3 at the site, the oblong altar remains were also very unique and rare and never found at other Buddhist temple sites. The inside of oblong altar was evenly covered with roof tiles instead of rubble, and there were small crushed stones for internal division, which is an altar construction method distinctly different from its counterparts at other Buddhist temple sites. Those findings raise the possibility high that a wooden facility was put up at the top of oblong remains.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.273-281
• /
• 2022

Mantle heterogeneity is closely related to the distribution and circulation of volatile components in the Earth's interior, and the behavior of volatiles in the mantle strongly influences the rheological properties of silicate rocks. In mantle xenoliths, these physicochemical properties of the upper mantle can be recorded in the form of microstructures and fluid inclusions. In this paper, I summarized and reviewed the results of previous studies related to the characteristics of microstructures and fluid inclusions from peridotite xenoliths beneath the Rio Grande Rift (RGR) in order to understand the evolution and heterogeneity of upper mantle. In the RGR, the mantle peridotites are mainly reported in the rift axis (EB: Elephant Butte, KB: Kilbourne Hole) and rift flank (AD: Adam's Diggings) regions. In the case of the former (EB and KB peridotites), the type-A lattice preferred orientation (LPO), formed under low-stress and low-water content, was reported. In the case of the latter (AD peridotites), the type-C LPO, formed under low-stress and high-water content, was reported. In particular, in the case of AD peridotites, at least two fluid infiltration events, such as early (type-1: CO₂-N₂) and late (type-2: CO₂-H₂O), have been recorded in orthopyroxene. The upper mantle heterogeneity recorded by these microstructures and fluid inclusions is considered to be due to the interaction between the North American plate and the Farallon plate.

• Journal of Powder Materials
• /
• v.15 no.5
• /
• pp.359-364
• /
• 2008

To satisfy the demand of higher cutting performance, mechanical properties with tungsten carbide (WC-Co) tool materials were investigated. Hardness and transverse rupture strength with WC grain size, Co content and density were measured. Compared to H, K, and S manufacture maker as tungsten carbide (WC-Co) tool materials were used for high-speed machining of end-milling operation. The three tungsten carbide (WC-Co) tool materials were evaluated by cutting of STD 11 cold-worked die steel (HRC25) under high-speed cutting condition. Also, tool life was obtained from measuring flank wear by CCD wear measuring system. Tool dynamometer was used to measure cutting force. The cutting force and tool wear are discussed along with tool material characteristics. Consequently, the end-mill of K, H manufacture maker showed higher wear-resistance due to its higher hardness, while the S maker endmill tool showed better performance for high metal removal.

• Journal of the Korean Professional Engineers Association
• /
• v.21 no.1
• /
• pp.5-12
• /
• 1988

The purpose of this paper is to investigate on the optimum coating thickness layer of TiC-Al$_2$O$_3$ coated cemented carbide tool. Chemical Vapor Deposition (CVD) of a thick film of TiC-A1$_2$O$_3$ on a cemented carbide produces an intermediate layer, $1.5mutextrm{m}$, 4.5${\mu}{\textrm}{m}$, 7.5${\mu}{\textrm}{m}$ 10.5${\mu}{\textrm}{m}$, 4 kind of TiC between the substrate and the $1.5mutextrm{m}$ constant thick A1$_2$O$_3$ coating. Experiments were carried out with the test relationship between coating thickness and shear angle, surface roughness, cutting force, microphotograph of crater wear, flank wear, tool life. From the experimental results, it was found that the optimum coating thickness of TiC-A1$_2$O$_3$ is 6${\mu}{\textrm}{m}$. Although the coating thickness layer 9${\mu}{\textrm}{m}$. 12${\mu}{\textrm}{m}$ have a much loger tool wear than an 3${\mu}{\textrm}{m}$, 6${\mu}{\textrm}{m}$ coating tool in cutting condition feed 0.05mm/rev, and the condition of feed 0.2mm/rev, 0.3mm/rev has upon in the shot time phenomenon of chipping.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.1-30
• /
• 1991

The lubrication state between contacting bodies with rolling and sliding under loaded condition is generally understood by the conception shown in Figure 1. When the lubricating oil film formation between facing bodies is good enough to separate these bodies by the hydrodynamic pressure, this state is called by the expression of "hydrodynamic lubrication". The thickness of oil film is so large that the lubricating oil between facing bodies behaves as fluid and metal-to-metal contact between surface roughness asperities on facing bodies does not occur. When the oil film thickness becomes thinner or when the surface roughness height becomes larger, top of surface roughness asperities on facing bodies reaches very near to each other and there the oil or absorbed oil molecules on the surface of facing bodies behave no more as fluid. Partly metal-to-metal contact of surface roughness asperities occurs. Such lubrication state is called by the expression "mixed-lubrication". When the oil film thickness becomes more thinner or surface roughness height becomes larger, metal-tometal contact or contact via absorbed oil molecules dominate at most of the part in contact zone. Such state is called by the expression "boundary lubrication". Schematic representation of these three regimes of lubrication is shown in Figure 1.rication is shown in Figure 1.

• Korean Journal of Adult Nursing
• /
• v.21 no.6
• /
• pp.678-690
• /
• 2009

Purpose: This study was performed to identify skin health status and the factors influencing skin hydration in the institutionalized elderly. Methods: The subjects were 139 elders living in 2 nursing homes in Seoul. Data for skin health status were collected by measurement of skin hydration, sebum, trans-epidermal water loss and pH using Corneometer, Sebumeter, Tewameter and Skin pH-meter on face, flank, arm and leg. Baseline data were collected by a structured questionnaire. The data were analyzed by SPSS/WIN 12.0 program. Results: Skin hydration and pH were relatively low especially on arms and legs but sebum and TEWL were not low, relatively. There were significant differences in skin health status according to gender, smoking, alcohol intake, and bath cleanser. There was significant positive correlation between skin-hydration and bath-time, TEWL and bath-frequency. Smoking, bath-cleanser, bath-time. pH and gender were identified as the significant influencing factors of skin hydration. Conclusion: Smoking, bath-time and pH need to be considered as important control factors for increasing skin health status in the institutionalized elderly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.263-267
• /
• 1990

The fat thicknesses of twenty-eight Japanese Black beef steers were measured with an ultrasonic device at eleven points on the cattle prior to slaughter and side dissection. The relation between live fat thickness and both weight and percentage of fat and lean in the carcass was examined. Fat thickness obtained from nine points of the chest, flank and rump regions was found to relate significantly (P<0.01) to both weight and percentage of fat. However, shoulder fat thickness measurements were not significantly related to the weight or percentage of fat or lean in the carcass. Addition of live fat thickness to animal age or live weight as an independent variable markedly improved the precision of multiple regression equations for predicting weight of fat and lean, and percentage of fat. In predicting the percentage of lean, both animal age and body weight were not employed in the multiple regression equation. The residual standard deviation for predicting percentage of fat and lean were 1.93 and 1.87, respectively. The ultrasonic measurement of fat thickness if supposed to be useful to the prediction of carcass composition of beef cattle.

• Transactions of Materials Processing
• /
• v.26 no.2
• /
• pp.87-94
• /
• 2017

Center pillar, which is installed in the center of flank of car body, supports roof and door and ensures the safety of driver by reducing the damage of car body caused by impact. Recently, high-strength steel is widely used to manufacture the center pillar due to high stiffness and fuel efficiency. In this study, material properties of the high-strength steel, whose tensile strength is more than 780MPa, were obtained to produce the center pillar. Stamping was performed by considering the design parameters (blank holder force, press stroke, blank size and pad pressure) used in the actual filed. The drawbeads were included in the stamping process to reduce the amounts of wrinkling and spring back. Using the commercial software, Autoform R5.2 and Minitab, effects of design parameters of the stamping process upon spring back were analyzed and applied to the design process. The restriking process meets the target of under 0.5mm in the amount of spring back.