본 연구는 초기 착화지연으로 화재예방에 중요한 역할을 담당하는 방염처리제도에 대한 실태 분석연구로서 현장에서 발생하는 여러 문제점들을 각 시도 소방공무원과 방염업자들과의 회의 및 시공현장 방문을 통해 분석하였다. 분석결과 첫 째, 수요가 작은 시장에서 너무 많은 업체들이 경쟁을 하고 있고 이로 인해 방염에 대한 전문성이 없는 일부 업자들은 원가절감을 위해 부실시공을 하는 등의 문제가 발생하고 있으며 둘 째, 현재 실시되고 있는 현장방염처리 검사제도는 검사자가 현장에서 직접 성능검사를 실시하지 못하고 시공자가 제출한 샘플로 방염성능검사를 실시하기 때문에 시료채취의 문제점과 제출된 시료의 신뢰성 및 현장의 방염성능 확보에 의문을 갖는 등의 문제가 발생하고 있다.
방염처리에 의한 톱밥-귤박 혼합파티클보드의 방염성능과 흡음성능의 변화를 관찰하고자 톱밥과 귤박을 혼합하여 파티클보드를 제작하였다. 보드로부터 원반형 시험편을 제작하여 무처리 보드에 2마이크로폰 전달함수법으로 보드의 흡음률을 측정하고 동일한 시험편에 방염수지를 도포한 후 동일한 방법으로 흡음률을 측정하였다. 방염성능 시험은 무처리와 방염처리 톱밥-귤박 혼합파티클보드를 45도 연소챔버에서 연소하여 탄화면적을 비교하였다. 방염처리에 의해시험편의 중량은 6.3% 정도 증가하였으며 탄화면적은 46.7% 정도 감소하였다. 흡음률은 측정주파수범위(500-6,400 Hz) 에서 방염처리 시험편이 무처리 시험편보다 약간 낮게 나타났다. 무처리와 방염처리 톱밥-귤박 혼합파티클보드의 흡음성능은 측정주파수 영역에서 상용 석고보드(두께 11 mm)보다 우수한 흡음성능을 나타내어 비내력벽 등의 흡음판으로의 이용이 기대된다.
본 연구에서는 실내장식 및 가구류 등에 이용되고 있는 편백루바와 파티클보드를 이용하여 방염처리 방법에 따른 방염성능 및 연소특성을 비교하는 실험을 하였다. 편백루바의 방염성능검사 결과 진공가압처리를 이용하여 난연수지를 주입한 편백루바가 표면에 염화고무수지 성분의 방염도료처리를 한 편백루바 보다 탄화면적은 9.55%, 탄화길이에서는 22.91% 우수한 것으로 나타났으며, 파티클보드는 파티클보드에 방염필름을 부착한 시편이 비방염필름을 부착한 시편보다 탄화면적 40.10%, 탄화길이에서는 43.40% 우수한 것으로 파악 되었다. Cone calorimeter를 이용한 연소특성 결과 편백루바 표면에 방염도료 처리를 한 시편이 진공가압처리를 이용한 난연수지 주입방식의 편백루바 보다 착화가 빨리 발생하였고, 총방출열량에서는 진공가압처리를 이용한 난연수지 주입방식의 편백루바가 $68.2MJ/m^2$, 편백루바 표면에 방염도료 처리를 한 시편이 $111.52MJ/m^2$을 나타내었으며, 파티클보드의 경우 착화시간에서는 미소한 차이를 보인 반면 총 방출열량에서는 파티클보드에 방염필름을 부착한 시편이 $90.1MJ/m^2$, 비방염필름을 부착한 시편은 $107.6MJ/m^2$의 총열방출량을 나타내었다.
Effect of fixation methods and relaxation treatment on the flame retardant(FR) and physical properties of MDPP/HMM treated cotton weft-knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of cotton weft-knitted fabric with MDPP/HMM. As the results, 1. Swelling agent and wet fixation method helps FR agent penetrate the fiber efficiently. Interlock showed relatively higher values of LOI than single jersey. 2. Interlock showed relatively higher values of bending rigidity(B), shear rigidity(G) and coefficient of friction(MIU) than those of single jersey before and after flame resistant treatment. 3. An increase in internal volume of cotton fiber by relaxation treatment increased the bending rigidity(B), shear rigidity(G) and compressional energy(WC). 4. The cotton weft-knitted fabric treated wet fixation, which crossliked FR agent efficiently, showed higher bending rigidity, shear rigidity(G) and lower compressional energy(WC). Retention of swelling ability of cotton weft-knitted fabrics treated with MDPP/HMM, which increased the internal volume of cotton weft-knitted fabric, showed lower bending rigidity.
For the preparation of hardened films which can be applied as a binder for flame-resistant materials such as silica, linseed oil was subjected to a low temperature plasma treatment with argon, or oxygen gas. The film was produced much faster than so-called drying of oil in air. The SEM analysis for silica particles embedded in the hardened film after plasma treatment showed that the silica particles were immobilized on substrate and were evenly dispersed. The FT-IR spectral analysis for the plasma-treated linseed oil films demonstrated that the radicals which were formed during the plasma treatments caused the linseed oil to be cross-linked, and the plasmas attacked carbon chains of the oil randomly without focusing on specific vulnerable bonds such carbon double and carbonyl bonds intensively unless exposure times of the plasmas were prolonged too much, while the cross-linking of the air-dried film was considered to occur at the well-known typical sites, i.e., carbon-carbon double bond and ${\alpha}$-methylene carbon. Burning times, as a measure of flame/fire resistance, of silica-filled cellulose substrates, increased with increasing contents of silica.
Effect of fixation methods and relaxation treatment on the dimensional stability and physical properties of MDPPA/HMM treated cotton knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of 4 kinds of cotton knitted fabric with MDPPA/HMM. Then these fabrics were washed 10 times. As a result, In swelling treatment on 10G showed relatively higher value of length shrinkage than 14G. Length and width shrinkage were increased by initial washing treatment and no further change was shown after 6 washing cycles. After 10 washing cycles, length and width shrinkage decreased. The KES standardized basic value of B/W, 2HB/W and bursting strength of interlock were relatively larger than those of single jersey. The values of B/W and 2HB/W of cotton knitted fabrics were increased by relaxation and washing treatment but were decreased by swelling treatment. In addition, the bursting strength of the cotton knitted fabrics was decreased after fusing, washing and relaxation treatment.
The effects of plasma treatment on the surfaces of the FR-4 (Flame Resistant-4) and copper substrates are investigated in terms of X-ray photoelectron spectroscopy (XPS), contact angle, and atomic force microscopy (AFM). The adhesion strengths of the underfills/FR-4 substrate and underfills/copper substrate are also studied. As experimental results, the plasma treatments of FR-4 and copper substrate surfaces yield several oxygen complexes in hydrophilic surfaces, which can play an important role in increasing the surface polarity, wettability, and adhesion characteristics of the underfills/substrates.
Granular activated carbon(GAC) is highly effective in removing organic compounds which are resistant to biological disintegration in wastewater treatment. However, GAC has reached its full adsorptive capacity, GAC needs to be regenerated before it can be used for a further adsorption cycle. Countercurrent oxidative reaction (COR) technique has been developed and evaluated for the regeneration of spent GAC. Various parameters such as flame temperature, the loss of carbon, destruction and removal efficiency (DRE) of organic compounds, surface area, surface structure, adsorptive capacity, etc. were examined to determine the performance of COR. The results of these tests showed that adosorptive capacity of regenerated GAC was completely recovered, the loss of carbon was controllable, flame temperature was high enough to insure complete destruction and removal $(\geq99.9999%)$ of specific organics of interest, polychlorinated biphenyls (PCBs), that are thermally stable, and on formation of toxic byproducts such as polychlorinated dibenzo-p-dioxins (PCDDs) or polychlorinated dibenzofurans (PCDFs) were detected during the regeneration process. The COR technique is environmentally benign, easy to use and less copital intensive than other available regeneration technologies.
본 논문에서는 방염에 의한 초가지붕과 목재구조에 대한 화재 예방대책을 고찰하였다. 초가지붕 재료인 볏짚에 함침시간을 달리하여 방염처리를 한 후 물에 침수시켜 세척한 후에도 방염성능을 유지하는지 확인하였다. 목재는 방염처리 방법에 따른 방염효과를 비교분석하기 위하여 상압함침법과 진공가압법, 붓칠 등의 방법으로 방염처리 하였다. 볏짚의 방염성능은 콘 히터를 이용하여 착화지연시간을 측정하였으며 목재의 방염성능은 45도 연소시험과 콘 히터 실험을 통해 실험하였다. 실험 결과 특수 가연물인 볏짚의 경우 방염처리한 볏짚의 착화지연시간이 처리되지 않은 것보다 훨씬 길게 나타났으며 방염처리 후 물에 침수시켜 세척한 경우에도 처리되지 않은 시료에 비하여 착화지연시간이 길게 나타나 방염성능을 유지하는 것으로 나타났다. 목재의 경우 진공가압법으로 방염처리한 시료의 방염효과가 가장 우수하였고 붓칠이나 상압함침한 경우에도 처리하지 않은 것보다 착화지연시간이 길게 나타나 화재 확산 예방에 효과가 있음을 알 수 있었다.
침엽수 구조재인 S.P.F 수종을 마이크로파로 단시간에 급속 건조시켜 액상의 인산염계 방염약제에 시간별로 침지시킨 후 2차 마이크로파 가열을 한 다음 3.8cm의 두께에서 1cm를 압축시켜 방염 후 처리물품 시험과 내구성 시험을 실시한 결과 1차 마이크로파 적정 가열시간은 5kW에서 7분 동안 가열할 경우 목표 함수율(4~5%)을 만족하는 것으로 나타났다. 인산염계 방염약제에 침지, 건조 후 3kW로 9분 동안 가열시켜 연화된 상태에서 압축된 목재의 함수율 측정결과 시험편 모두 외부용 목재의 적정 함수율인 12~14%의 범위를 만족하는 것으로 나타났다 또한 압축된 목재의 방염후 처리물품 시험을 통한 방염성능은 방염약제에 30분간 침지된 시험편이 가장 우수한 것으로 나타났으며 압축된 목재의 성능 시험 결과 경도, 못뽑기 저항, 압축, 휨강도, 전단 강도 모두 약 2~3배 이상 역학적 특성이 향상되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.