• 영어영문학
• /
• 제58권6호
• /
• pp.1167-1191
• /
• 2012

For Romantic women writers the paratext itself is essentially a masculine literary space affiliated with established writing practices; however, this paper suggests that Charlotte Turner Smith's mode of discourse in her use of notes and their relation to the text proper are never fixed in her contemplative blank-verse long poem, Beachy Head (1807). Even though the display of learning in the paratext partly supports the woman writer's claim to authority, this paper argues that Smith's endnotes also indicate her way of challenging the double bind for women writers, summoning masculine authority on the margins of her book while simultaneously interrogating essentialist thinking and instructions about one's identity in a culture and on the printed page. The poem shows how the fringes of the book can be effectively transformed from a masculine site of authority to an increasingly feminized site of interchange as Smith writes with an awareness of patriarchal, imperial abuses of power in that area of the book. There is a persistent transgression of cultural/textual boundaries occurring in Beachy Head, which explores the very scene and languages of imperial encounter. Accordingly, if Wordsworth's theory of composition suggests a subjective and abstract poetic experience-an experience without mediation-in which its medium's purpose seems to be to disappear from the reader's consciousness, an examination of the alternative discourse of self-exposure in Smith's poem reveals the essentially fluid nature of media-consciousness in the Romantic era, which remains little acknowledged in received accounts of Romantic literary culture.

• 한국컴퓨터그래픽스학회논문지
• /
• 제24권3호
• /
• pp.49-59
• /
• 2018

가상 멀미는 가상 현실의 대표적 부작용 중 하나로 다양한 요소에 의해 영향을 받는다. Field of view (FOV)는 그 중 대표적인 요소 중 하나로, FOV가 줄어들면 가상 멀미는 줄일 수 있으나 임장감 또한 낮아지는 것으로 알려져 왔다. 최근 연구에 따르면 임장감을 유지하면서 가상 멀미를 줄이기 위해 Dynamic FOV Restrictor (Center-fixed FOV Restrictor)가 제안되었으며, 아바타의 속도와 각속도를 반영하여 동적으로 FOV를 제한하였다. 본 연구 그룹에서는 여기에 머리의 회전과 눈의 움직임을 더하여 Eye-tracking Based Dynamic FOV Restrictor (Eye-tracking FOV Restrictor)를 제안하였다. 본 연구는 FOV Restrictor가 없는 조건과, Center-fixed FOV Restrictor조건, Eye-tracking FOV Restrictor조건의 가상 멀미와 임장감을 연구하였다. 본 연구 결과에 따르면 Center-fixed FOV Restrictor조건의 가상 멀미가 다른 두 조건의 가상 멀미 보다 낮은 것을 확인하였고, 세 조건에서 영장감에 차이가 없는 것을 확인하였다. 이러한 가상 멀미 저감 요소 기술에 대한 해석과 한계에 대하여 본 논문에서 논의하였다.

• 한국항공우주학회지
• /
• 제41권5호
• /
• pp.357-365
• /
• 2013

본 연구에서는 미사일형상의 몸체(쉘)와 쉘의 헤드부에 조종면을 부착한 발사체에서 힘과 모멘트를 측정하였다. 쉘과 헤드부는 상호 분리되어 있으며, 쉘은 모터에 의하여 회전되도록 하였다. 헤드부는 쉘의 회전방향과는 반대로 회전하며, 헤드부의 회전은 한 쌍의 조종면에 동일한 회전 방향으로 각변위을 주어서 비행하는 경우에 자연적으로 회전력이 발생되도록 하였다. 실험에서의 유속은 40 m/s로 설정하였으며, 레이놀드수는 헤드직경을 기준으로 $1.3{\times}10^5$였다. 발사체의 자세제어 및 방향전환을 위하여 헤드부에 있는 다른 한쌍의 조종면은 각변위의 조정이 가능하도록 하였다. 회전하는 발사체에서 힘과 모멘트의 변화가 측정되었으며, 측정된 결과로부터 FFT 분석을 통하여 영향력이 있는 진폭과 주파수를 얻었다.

• 대한두경부종양학회지
• /
• 제8권1호
• /
• pp.37-43
• /
• 1992

In order to improve the control of large unresectable(>6cm) and fixed N3(TNM-UICC) metastatic neck nodes, local hyperthermia(HT) has been combined with radiation therapty (RT) in Yonsei cancer center. From April 1985 to april 1988, a total of 18 patients of head and neck cancer with metastatic large unresectable and fixed cervical neck nodes who underwent combined RT and HT were analyzed. Of 18 patients, complete response rate was 39% (7 pt.) partial response 39% (7 pt.) and overall response rate was 78%. Acute side effects of these combined modalities were found in 8 patients and which were mainly cutaneous reaction such as erythema, dry and moist desquamation but recovered spontaneously in all patients after treatment. Factors of maximum tumor temperature above $43^{\circ}\C$ and MDF(multiple daily fractionation) showed more favorable response rate but not statistically sinificant. Two year actuarial survival rate of all patients was 35.4%.

• 한국수자원학회논문집
• /
• 제49권12호
• /
• pp.961-969
• /
• 2016

최근 들어 보의 환경적인 측면을 고려한 저낙차형 구조물 설치가 요구되면서 고정보의 형태도 다양하게 제안되고 있다. 그러나 실무에 적용하기 위한 횡단구조물의 설계 가이드라인은 매우 한정적이다. 따라서 본 연구는 국내 중소하천에 설치된 고정보의 물리적 제원 변경에 의한 수리적 특성을 분석함으로써 환경적인 측면을 고려한 저낙차형 고정보의 유량계수 산정을 위한 기초자료를 제공하는데 목적이 있다. 이를 위해 경사형 및 계단형 보에 대해 crest 변화에 따른 기본적인 유량계수를 도출하였으며 수위-유량 관계 곡선을 개발하였다. 또한 유량과 crest 등과 같은 수리학적조건을 변화시켜 자유 흐름 조건 및 잠긴 흐름 조건의 흐름특성을 분석하였다.

• Korean Journal of Radiology
• /
• 제22권8호
• /
• pp.1352-1368
• /
• 2021

Objective: For an accurate dynamic contrast-enhanced (DCE) MRI analysis, exact baseline T1 mapping is critical. The purpose of this study was to compare the pharmacokinetic parameters of DCE MRI using synthetic MRI with those using fixed baseline T1 values. Materials and Methods: This retrospective study included 102 patients who underwent both DCE and synthetic brain MRI. Two methods were set for the baseline T1: one using the fixed value and the other using the T1 map from synthetic MRI. The volume transfer constant (K^trans), volume of the vascular plasma space (v_p), and the volume of the extravascular extracellular space (v_e) were compared between the two methods. The interclass correlation coefficients and the Bland-Altman method were used to assess the reliability. Results: In normal-appearing frontal white matter (WM), the mean values of K^trans, v_e, and v_p were significantly higher in the fixed value method than in the T1 map method. In the normal-appearing occipital WM, the mean values of v_e and v_p were significantly higher in the fixed value method. In the putamen and head of the caudate nucleus, the mean values of K^trans, v_e, and v_p were significantly lower in the fixed value method. In addition, the T1 map method showed comparable interobserver agreements with the fixed baseline T1 value method. Conclusion: The T1 map method using synthetic MRI may be useful for reflecting individual differences and reliable measurements in clinical applications of DCE MRI.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.120-126
• /
• 2018

The traffic accident types are largely classified into vehicle to vehicle accident, vehicle-to-person accident and single-vehicle. Especially, the single-vehicle accident types are severe when the vehicle crashed into road facilities such as bridge, piers, utility poles. The severity of single-vehicle accidents are ten times higher than that of all other accidents types. It is needed to consider to reduce accident severity. This study was conducted to develop crash worthy safety design facility to ensure the vehicle occupant safety. The simulation and the crash tests were conducted for assessment of the safety performance to check the criteria of CC2(Crash Cushion 2) level. THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) were used to assess occupant impact severity for crashes. The non-redirection collision test conditions for 900 kg and 1,300 kg-head on crash tests, 900 kg-1/4 offset crash tests, 1,300 kg-head on crash test with $15^{\circ}$angle were conducted. The simulation and experiment test result showed that THIV values were below 44 km/h criterion, PHD values were below the 20G. The development non-redirective crash cushion is expected to be used for the fixed object such as bridge piers for assuring occupant safety.

• Imaging Science in Dentistry
• /
• 제46권2호
• /
• pp.133-139
• /
• 2016

Purpose: The aim of this study was to compare the coordinates of anatomical landmarks on cone-beam computed tomographic (CBCT) images in varied head positions before and after reorientation using image analysis software. Materials and Methods: CBCT images were taken in a normal position and four varied head positions using a dry skull marked with 3 points where gutta percha was fixed. In each of the five radiographic images, reference points were set, 20 anatomical landmarks were identified, and each set of coordinates was calculated. Coordinates in the images from the normally positioned head were compared with those in the images obtained from varied head positions using statistical methods. Post-reorientation coordinates calculated using a three-dimensional image analysis program were also compared to the reference coordinates. Results: In the original images, statistically significant differences were found between coordinates in the normal-position and varied-position images. However, post-reorientation, no statistically significant differences were found between coordinates in the normal-position and varied-position images. Conclusion: The changes in head position impacted the coordinates of the anatomical landmarks in three-dimensional images. However, reorientation using image analysis software allowed accurate superimposition onto the reference positions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권5호
• /
• pp.382-387
• /
• 2021

Objectives: Zygomatic complex (ZMC) fractures comprise up to 40% of all facial fractures. Misaligned bone fragments and misplaced fixation hardware traditionally detected postoperatively on plain radiographs of the skull might require re-operation. The intraoperative O-Arm (Medtronic, USA) is a three-dimensional (3D) computed tomographic imaging system. Materials and Methods: This retrospective single-center study evaluated the utility of O-Arm scanning during corrective surgeries for ZMC and zygomatic arch (ZA) fractures from 2018 to 2020. Three females and 16 males (mean age, 31.52 years; range, 22-48 years) were included. Fracture instability (n=6) and facial deformity (n=15) were the most frequent indications for intraoperative 3D O-Arm scan. Results: The images demonstrated that all fracture lines were properly reduced and fixed. Another scan performed at the end of the fixation or reduction stage, however, revealed suboptimal results in five of the 19 cases, and further reduction and fixation of the fracture lines were required. Conclusion: Implementation of an intraoperative O-Arm system in ZMC and ZA fracture surgeries assists in obtaining predictable and accurate results and obviates the need for revision surgeries. The device should be considered for precise operations such as ZMC fracture repairs.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.115-122
• /
• 2009

In shipbuilding process, automated marking systems are used to print steel part information on the steel plate. Especially, an automated marking system with a moving ink-head prints characters on each block, which divide the steel plate into a fixed size. Therefore it is necessary to split characters, because some characters can be extended into several blocks. Particularly the algorithm, which splits characters, must guarantee its printing quality in any direction since characters can be printed by any angle.