• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.93-100
• /
• 2007

In this study, an investigation was made on bristles for the prosthetic and periodontally involved patients based on the previous studies. The purpose of this study was to investigate the ideal location and dimensions of bristles for the patients who were installed with fixed prostheses and severely involved periodontitis. 3D scanner was used to develop 3D visual models of bristles and teeth. These models were developed to be used for designing the ideal bristles for the prosthetic and periodontally involved patients. For the ideal design of bristle, interproximal area of dental arch and bristle must get into maximum and standard teeth may have to be chosen from many gypsum molds. During the design process the factors should be considered that influence the removal of plaque by bristle.

• 보건행정학회지
• /
• 제4권1호
• /
• pp.123-137
• /
• 1994

The objectives of this research is to find the factors which determined hospital profitability. The unit of analysis is hospital, and the data is collected from two sources. One source is derived from Ministry of Health and Social Affairs(4 years' data from 134 hospitals), and another source is derived from Sam-II Accounting Co.(1 year's data from 37 hospitals). Hospital profitability, which is dependent variable in our research, is measured with financial ration, such as ROI(reture on investment). The major findings are as follows; 1) The hospital profitability is determined with not hospital type itself but management-incentives associated with hospital type. 2) The maximum profitability is obtained in 775 bed-size. 3) The hospital location isn't a factor to determine profitability 4) The internal control and management, such as account receivables, inventory, fixed assert investment, is major factor to hospital profitability.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.349-354
• /
• 1998

The grid reference system (GRS) has been useful for identifying the geographical location of satellite images. In this study we derive a GRS for the KOMPSAT Electro-Optical Camera (EOC) images. The derivation substantially follows the way that SPOT defines for its GRS, but incorporates the KOMPSAT orbital characteristics. The KOMPSAT EOC GRS (KEGRS) is designed to be a (K,J) coordinate system. The K coordinate parallel to the KOMPSAT ground track denotes the relative longitudinal position and the J coordinate represents the relative latitudinal position. The numbering of K begins with the prime meridian of K=1 with K increasing eastward, and the numbering of J uses a fixed value of J=500 at all center points on the equator with J increasing northward. The lateral and vertical intervals of grids are determined to be 12.5 km about at the 38$^{\circ}$ latitude to allow some margins for the value-added processing. The above design factors are being implemented in a satellite programming module of the KOMPSAT Receiving and Processing System (KRPS) to facilitate the EOC data collection planning over the Korean peninsula.

• Tribology and Lubricants
• /
• 제16권5호
• /
• pp.373-380
• /
• 2000

Finite element analysis is performed on the subsurface crack propagation in brittle materials due to sliding contact. The sliding contact is simulated by a rigid asperity moving across the surface of an elastic half-surface containing single and multiple cracks. The single crack, coplanar cracks and parallel cracks are modeled to investigate the interaction effects on the crack growth in contact fatigue. The crack location is fixed and the friction coefficients between asperity and half-space are varied to analyze the effect of surface friction on stress intensity factor for horizontal cracks. The crack propagation direction is predicted based on the maximum range of shear and tensile stress intensity factors. With a coplanar crack, the stress intensity factor was increased. However, with a parallel crack, the stress intensity factor was decreased. These results indicate that the interaction of a coplanar crack increases fatigue crack propagation, whereas that of a parallel crack decreases it.

• Current Research on Agriculture and Life Sciences
• /
• 제14권
• /
• pp.37-47
• /
• 1996

The main objectives of this studies are to present the most desirable rice processing complex model system in a given our situations by comparision and analyzing the major factors and, also recommend the future prospect of the rice processing complex in Korea. There are 3 different rice processing complex models in Korea. Those are concrete bin, flat type steel bin and square bin. These systems have a lot of differences and have their own characteristics such as capital requirement, efficiency, storage capacity and quality controls. The major problems of the existing rice processing centers in Korea are high fixed cost and the unbalnced systems. Following is summary to solve this problems: 1. Development of the large scale harvester and high speed continuous dryer. 2. Quality inspective system of bulk grain and large scale temporary storage facilities. 3. Large size readjustment of arable land. 4. Select the convenient location of rice processing center and formulation of well equipment facilities.

• 대한의용생체공학회:의공학회지
• /
• 제27권4호
• /
• pp.180-188
• /
• 2006

Bristles for the prosthetic and periodontally involved patients are investigated based on previous studies. Specifically, the ideal location and dimensions of bristles for the patients who were installed with fixed prostheses and severely involved periodontitis were investigated. 3D (Three-Dimensional) scanner was used to develop 3D visual models of bristles and teeth. These models were used for designing the ideal bristles. In the design, the interproximal area of dental arch and bristle must be maximized and the standard teeth may have to be chosen from many gypsum molds. During the design process the factors that influence plaque removal by the bristle were considered.

• 한국경제지리학회지
• /
• 제19권1호
• /
• pp.68-82
• /
• 2016

목적지 선택 행태 분석은 교통 수요 연구의 중요한 주제이다. 본 연구는 일반적인 교통 수요 연구와 달리 일반인과 다른 인구집단적 특성을 갖고 있는 대학생들의 통학 등의 쇼핑, 여가, 오락 활동을 위한 통행의 목적지 선택에 대한 영향 요인을 분석하였다. 대학생들의 일상은 취업자나 중고등학생보다 상대적으로 자율적이나 수업 등의 의무 활동이 혼재되어 있다. 쇼핑, 여가, 오락 활동은 업무나 학업 등의 활동과 달리 그 실행의 구체적인 내용의 선택이 상대적으로 자유롭다. 본 연구는 다항로짓 분석을 통해 대학생들의 거주지 주변, 학교 주변, 강북 지역, 강남 지역 등의 통행 목적지 선택에 대한 영향 요인을 분석하였다. 분석 결과 이들 활동들의 목적지 선택에는 거주지와 성별, 소득 등이 많은 영향을 미치고 있었으며, 대학생에 특징적인 다양한 해석이 도출되었다. 일반인과 다른 특성의 대규모 인구집단인 대학생의 통행 특성 연구는 교통계획에 시사점을 준다.

• 산경연구논집
• /
• 제8권7호
• /
• pp.13-20
• /
• 2017

Purpose - Performance appraisal has a significant influence on the development of low-carbon tourism distribution. Research design, data, and methodology - Data of this study are collected from 27 provinces (cities) of China. SBM-Malmquist model is used to measure the TFP and its dynamic changes of low-carbon tourism distribution; TOBIT model is used to discuss the factors of TFP of low-carbon tourism distribution. Results - The results show that, there are obvious differences among regional TFP of low-carbon tourism distribution, the average change tends to grow positively in general, and the western region grows fastest on average due to the improvement of technical efficiency and technical progress, while there are technical efficiency improvement but technical regresses in eastern and central regions. The economic scale, economic strength, structure of energy consumption, location quotient and government regulation have a significant positive effect on the TFP of low-carbon tourism; energy intensity, industrial structure and opening degree have a negative effect; investments in fixed assets, intensity of R&D fund and urbanization rate have no significant influence on the TFP of low-carbon tourism. Conclusions - Improving the productivity of low-carbon tourism and reducing regional differences are effective ways to develop low-carbon tourism and enhance tourism competitiveness.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권4호
• /
• pp.305-312
• /
• 2022

The proportion and testing of portable radiation tests, which are limited at the request of the doctor, are gradually increasing only for patients in emergency situations and difficulties in moving. However, as there are many limiting factors compared to fixed devices, this study intends to measure and analyze the distortion of images according to the angle of the detector and the change in dose according to the position of the subject. For distortion experiments using a mobile radiation generator used in Hospital A, the SID was tilted by 110 cm, 14"×17" wireless FPD detector to 0°, -5°, -10°, -15°, -20°, and -35° to measure the change in area. The dose according to the location of the detector was analyzed on average by measuring the central dose at 110 cm of the SID and measuring the dose of 9 locations three times each. The analysis result of distortion by location according to the angle of the detector showed a statistically significant difference (f=58.74, p<0.000). Therefore, it can be seen that the angle of the detector and the tube is closely related to the distortion of the image. The difference in dose by location of the detector increased with respect to the center - pole, and decreased with the + pole. Tests using mobile radiation generators will require careful efforts by clinicians to position patients in the center of the detector for accurate diagnosis, and efforts will be made to level the angle between the mobile radiation generators and the detector.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.309-317
• /
• 2012

Objective: The aim of this paper is to inquire into the influences form factors and control types affect a search time and comfort at list menu of full touch phone. Background: Various studies have been proceeded that are related to the optimum touch area for enhancing usability of control and legibility in mobile touch device. In the environment of list menu which is widely used to provide various information effectively, however, not only comprehensive consideration for legibility and control is to be seek but also research for control type which is to scroll a list. Method: This study executed form factor experiment to inquire into the influence that font size, height of row and fixed area affect searching time and comfort in the while information processing even if the information on the list is unsorted in alphabetical order. Among the result of form factor experiment, control type experiment was executed by selecting shortest performance time, highest legibility comfort and control comfort. Control type experiment was implemented to figure out the influence which existing flicking type, scrolling bar type, newly established button page type and button raw types affect performance time and subjective comfort depending on location of the information. Results: Font size 12pt, height of row 7mm and fixed area 15mm was shortest performance time and got highest comfort and legibility score in form factor experiment. A Button page which was newly proposed type was shortest performance time and got highest comprehensive comfort in control type experiment. Conclusion: Form factor experiment showed similar results with the study through reading a long passage of character or controlling a grid icon type. However, height of row turned out to affect not only touch area for control but also legibility by ruling space between the lines. Button page type which was newly proposed showed shortest performance time and got highest comprehensive comfort. Because Button page type needs few finger movements than other control types and implements search in the fixed form, unlikely other type which list keeps moving. Application: This study should be applied in deciding form factors and control type for scroll when designing a list menu of full touch phone.