• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.47-54
• /
• 2008

Fitting process carried out in the automobile transmission assembly line is classified into three classes; heat fitting, press fitting, and their combined fitting. Heat fitting is a method that heats gear to a suitable range under the tempering temperature and squeezes it toward the outer diameter of shaft. Its stress depends on the yield strength of gear. Press fitting is a method that generally squeezes gear toward that of shaft at room temperature by a press. Another method heats warmly gear and safely squeezes it toward that of shaft. Warm shrink fitting process for the automobile transmission part is now gradually increased, but the parts (shaft/gear) assembled by this process produced dimensional changes in both the outer diameter and profile of the gear. So that it may cause noise and vibration between gears. In order to solve these problems, we need an analysis of warm shrink fitting process, in which design parameters are involved; contact pressure according to fitting interference between outer diameter of shaft and inner diameter of gear, fitting temperature, and profile tolerance of gear. In this study, an closed form equation to predict contact pressure and fitting load was proposed in order to develop an optimization technique of the warm shrink fitting process and verified its reliability through the experimental results measured in the field and FEM, that is, thermal-structural coupled field analysis. Actual loads measured in the field was in good agreements with the results obtained by the theoretical and finite element analysis.

• 지질공학
• /
• 제31권2호
• /
• pp.165-178
• /
• 2021

자연사면을 대상으로 강우에 따른 침투해석 및 사면안정해석을 통하여 사면토층의 흙-함수특성곡선(SWCC) 맞춤계수에 따른 안정성의 영향을 평가하였다. 연구 대상사면의 토질시료를 채취하여 토층의 물리적, 역학적 및 불포화 특성을 실험하였다. 현장조건의 흙-함수특성곡선(SWCC)의 맞춤계수 α 및 n을 변화시켜 침투해석을 통한 포화심도를 산정하였으며, 이를 고려하여 한계평형해석기법을 이용한 사면안정해석을 수행하였다. 강우에 의한 침투해석 결과에 따르면 맞춤계수 α가 감소함에 따라 토층 내 포화심도가 급격하게 증가하며, 전체 토층에 대한 포화시간도 짧아지는 것으로 나타났다. 그리고 포화심도를 고려한 사면안정해석결과에 의하면 맞춤계수 α가 감소함에 따라 사면안전율은 급격하게 감소하지만, 맞춤계수 n을 증가시키더라도 사면안전율의 변화는 매우 작은 것으로 나타났다. 따라서 강우침투로 인한 포화심도와 이를 고려한 사면안정성은 흙-함수특성곡선(SWCC)의 맞춤계수 α에 크게 영향을 받으며, 맞춤계수 n의 영향은 상대적으로 매우 작음을 알 수 있다.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.601-618
• /
• 2024

The joint probability distribution of uncertain geomechanical parameters of geotechnical strata is a crucial aspect in constructing the reliability functional function for roof structures. However, due to the limited number of on-site exploration and test data samples, it is challenging to conduct a scientifically reliable analysis of roof geotechnical strata. This study proposes a Copula method based on small sample exploration and test data to construct the intensity characteristics of roof geotechnical strata. Firstly, the theory of multidimensional copula is systematically introduced, especially the construction of four-dimensional Gaussian copula. Secondly, data from measurements of 176 groups of geomechanical parameters of roof geotechnical strata in 31 coal mines in China are collected. The goodness of fit and simulation error of the four-dimensional Gaussian Copula constructed using the Pearson method, Kendall method, and Spearman methods are analyzed. Finally, the fitting effects of positive and negative correlation coefficients under different copula functions are discussed respectively. The results demonstrate that the established multidimensional Gaussian Copula joint distribution model can scientifically represent the uncertainty of geomechanical parameters in roof geotechnical strata. It provides an important theoretical basis for the study of reliability functional functions for roof structures. Different construction methods for multidimensional Gaussian Copula yield varying simulation effects. The Kendall method exhibits the best fit in constructing correlations of geotechnical parameters. For the bivariate Copula fitting ability of uncertain parameters in roof geotechnical strata, when the correlation is strong, Gaussian Copula demonstrates the best fit, and other Copula functions also show remarkable fitting ability in the region of fixed correlation parameters. The research results can offer valuable reference for the stability analysis of roof geotechnical engineering.

• Applied Microscopy
• /
• 제41권1호
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• 대한화학회지
• /
• 제65권6호
• /
• pp.419-432
• /
• 2021

According to the transition state (TS) theory, Gaussian software and Yao and Lin (YL) method, the thermodynamics and kinetic data respectively were calculated, and anharmonic effect was considered for related reactions of NO₃. The methods of calculating and fitting kinetic and thermodynamics parameters were provided by least square method and related equations in this paper. Notably, the fitted E of Arrhenius equation was close to the calculated barrier of related reaction by QCISD(T) method. Therefore, the kinetic fitting result can well express the physical meaning of E in Arrhenius equation. Besides, the conversion process and the reaction mechanism of NO₃ were researched. For NO₃, it seemed that its instability results from its easy reaction with other substances rather than the decompose reaction of itself.

• 대한토목학회논문집
• /
• 제2권2호
• /
• pp.29-38
• /
• 1982

유효강우량(有效降雨量), 섬체시간(暹滯時間) 및 유출(流出)의 비선형(非線型)을 포함하는 비선형(非線型) 수문학적(水文學的) 모형(模型)이 기술(記述)된다. 모형(模型)의 입력자료(入力資料)를 구성하는 유효강우량(有效降雨量)의 산정(算定)은 polynomial fitting 방법(方法)이 이용되었으며 섬체시간(暹滯時間)의 비선형성(非線型性)이 고려된 비선형섬체모형(非線型暹滯模型)을 남한강(南漢江) 상류(上流)에 위치한 섬강유역(蟾江流域)에 적용하여 상수(常數)값을 산정하고 종래의 방법인 fitting 방법(方法) 및 저류함수모형(貯溜凾數模型)에 변형(變型)을 가한 상관모형(相關模型)의 상수(常數)값들과 비교하였다. 각 모형(模型)에서 구한 상수(常數)값의 결과로부터 본연구(本硏究)의 수학적(數學的) 해법(解法)인 연속근사해법(連續近似解法)과 수치해법(數値解法)인 Newton-Rhapson 방법(方法)이 비선형(非線型) 유출과정해석(流出過程解析)에서 종전의 계산도해법(計算圖解法) 등에 비해 우수함이 밝혀졌다.

• 한국해양공학회지
• /
• 제22권3호
• /
• pp.41-46
• /
• 2008

It is a recent trend for advanced ships and submarines to incorporate composite structures with viscoelastically damping material. Much research has been done on curve-fitting techniquesto identify vibration characteristic parameters such as natural frequencies, modal damping ratios, and mode shapes of the composite structure. In this study, an advanced technique for accurately determining vibration characteristic of a circular cylindrical shell-attached viscoelastically damping material is used, based on a multi-degree of freedom (MDOF) curve-fitting method. First, an initial value is obtained by using a linear least square method. Next, using the initial value, the exact modal parameters of the composite circular cylindrical shell are obtained by using a nonlinear least square method. Results show computation time is greatly decreased and accurate results are obtained by the MDOF curve-fitting method.

• 전자공학회논문지B
• /
• 제32B권10호
• /
• pp.1305-1313
• /
• 1995

In this paper, we propose a robust estimation of camera parameters from image sequence for high quality video composition. We first establish correspondence of feature points between consecutive image fields. After the establishment, we formulate a nonlinear least-square data fitting problem. When the image sequence contains moving objects, and/or when the correspondence establishment is not successful for some feature points, we get bad observations, outliers. They should be properly eliminated for a good estimation. Thus, we propose an iterative algorithm for rejecting the outliers and fitting the camera parameters alternatively. We show the validity of the proposed method using computer generated data sets and real image sequeces.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.211-219
• /
• 1999

Surface complexation models(SCMs) have been performed to predict metal ion adsorption behavior onto the mineral surface. Application of SCMs, however, requires a self-consistent approach to determine model parameter values. In this paper, in order to determine the metal ion adsorption parameters for the triple layer model(TLM) version of the SCM, we used the zeta potential data for Zeolite and Kaolinite, and the metal ion adsorption data for Pb(II) and Cd(II). Fitting parameters determined for the modeling were as follows ; total site concentration, site density, specific surface area, surface acidity constants, etc. Zeta potential as a new approach other than the acidic-alkalimetric titration method was adopted for simulation of adsorption phenomena. Some fitting parameters were determined by the trial and error method. Modeling approach was successful in quantitatively simulating adsorption behavior under various geochemical conditions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.49-53
• /
• 2001

Recently hydroforming process became a process which is increasingly applied in the automotive industry. As the hydroforming process is a new technology, there is no abundant data to assist manufacturing the products. To investigate the effects of process parameters on the tube hydroforming process, simple bulging, circular bulging and Tee-fitting tests are performed. The optimal leading path to escape the failure modes(bursting, wrinkling) is determined and the effects of the process parameters, the internal pressure and axial feeding on the product quality, such as thickness distribution, forming height and branch dome shape are investigated.