• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1457-1460
• /
• 2019

In this paper, we proposed the development of a mixed sensor parts for integrated radiation exposure protection fireman's life-saving alarm that can be location-tracked and irradiated. To measure radiation exposure dose, we use the PIN-Diode radiation measurement sensor module, a semi-conductive radiation measurement sensor that can minimize size and weight. The design for removing leakage current is carried out to enhance the characteristics of the radiation measurement sensor using PIN-Diode. The IMU sensor module is used to estimate the location of the current fireman at the same time as the accident estimate by adding together the data and the values for acceleration on the three axis. Experiments were conductied by an authorized testing agency to determine the efficiency of the proposed mixed sensor parts for integrated radiation exposure protection fireman's life-saving alarms. The cumulative dose measurement range was measured in the range of 10 μSv to 10 mSv, the highest level in the world. The accuracy was measured from ±6.3% to ±9.0% (137 Cs) and normal operation was found at the international standard of ±15%. In addition, positional accuracy was measured within ±10%, resulting in a high level of results, demonstrating its effectiveness. Therefore, it is expected that more firemen will be able to provide with superior performance integrated radiation exposure protection fireman life-saving alarm.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.358-365
• /
• 2017

As the damage caused by disasters increases rapidly around the world, it is necessary to develop the technology for equipment to reduce human injury. Therefore in the support of fire safety and 119 rescue and rescue technology research and development project, in the "Development of a power assist device for a fireman to rescue humans(2015 ~ 2018)" for life saving restoration, we are developing equipment that satisfies the lifting performance considering the disaster environment and the disaster response scenario(Amount of load over 100 kg, height of over 1 m, height over middle 60 cm, speed over 0.2 m/s). In this study, we propose a lifting performance and environmental test method to evaluate the usefulness of the power-assisted device and analyze and verify detailed specifications of the device through dynamics analysis of the lifting performance test. This study suggests that the proposed test method can be applied practically to evaluate whether a stable performance of a power-assisted device is achieved.

• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.11-21
• /
• 2022

Two methods for analyzing interaction between shaped charge jets and targets are taken in AVEAM-MT (ADD Vulnerability and Effectiveness Assessment Model for Materiel Target), which is a model for vulnerability analysis of materiel targets and being developed by ADD. One is an empirical method improved from the Fireman-Pugh technique for rapid penetration calculation into target components. The other is ADD-TSC(ADD Tandem Shaped Charge), which is a physics-based model extended to be applicable for shaped charge jets from the Walker-Anderson penetration model for higher fidelity analysis. In this paper, the two methods are briefly described, and the empirical technique is compared to the physics-based model in the prediction of residual penetration capacity. The latter is also compared to experimental results found in literature in predicting penetration capacity. These comparisons show that both methods can be used for fast calculations or higher fidelity calculations in vulnerability analysis models like AVEAM-MT which is required to perform a considerable amount of iterative simulation for damage analysis.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1461-1464
• /
• 2019

In this paper, we propose the development of embedded board for integrated radiation exposure protection fireman's life-saving alarm capable of location tracking and radiation measurement. The proposed techniques consist of signal processing unit, communication unit, power unit, main control unit. Signal processing units apply shielding design, noise reduction technology and electromagnetic wave subtraction technology. The communication unit is designed to communicate using the wifi method. In the main control unit, power consumption is reduced to a minimum, and a high performance system is formed through small, high density and low heat generation. The proposed techniques are equipment operated by exposure to poor conditions, such as disaster and fire sites, so they are designed and manufactured for external appearance considering waterproof and thermal endurance. The proposed techniques were tested by an authorized testing agency to determine the effectiveness of embedded board. The waterproof grade has achieved the IP67 rating, which can maintain stable performance even when flooded with water at the disaster site due to the nature of the fireman's equipment. The operating temperature was measured in the range of -10℃ to 50℃ to cope with a wide range of environmental changes at the disaster site. The battery life was measured to be available 144 hours after a single charge to cope with emergency disasters such as a collapse accident. The maximum communication distance, including the PCB, was measured to operate at 54.2 meters, a range wider than the existing 50 meters, at a straight line with the command-and-control vehicle in the event of a disaster. Therefore, the effectiveness of embedded board for embedded board for integrated radiation exposure protection fireman's life-saving alarm has been demonstrated.

• Fire Science and Engineering
• /
• v.15 no.4
• /
• pp.10-23
• /
• 2001

This paper study on the reforming devices of the fire officers' employment to be more efficient to their specialty. The problems about employment have been investigated and analyzed through questions and comparisons of other kinds of officers' employments. On this basis, the better devices of special employment and general employment or treatment for students after graduation who studied at the department about fire services are achieved. The efficient devices are the extension of the special employment, subject adjustment of the employment examination concerned about its relation with the real service at the fire station.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.71-77
• /
• 2003

To inject fresh air into a fire room, Positive Pressure Ventilation (PPV) can be used and the blower of PPV increases inside pressure of the room. It makes high flow rate of products of combustion, smoke and heat from the structure, and it is very helpful to fireman on the fire extinguishing work. The flame moves to the direction of airflow and the temperature of flame can be decreased rapidly. In this experiment, a water mist system is applied to PPV to increase the effectiveness, and various effective factors are studied. n-Heptane and pine wood stick were used as fuel. Temperatures at the above and behind the combustion pan were strongly reduced by the water mist system and by the convective cooling with airflow. The smoke density was also decreased by PPV with water mist system and it can be explained by the absorption of smoke particles on the water mist droplet and by the strong exhausting effects of mobile fan.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.59-60
• /
• 2010

Unlike cases of fire on land where experienced fireman and various fire fighting equipment are present, onboard fires need to be independently extinguished, making it a complex process. The primal objective of getting quick control of a fire is to prevent casualties which generally occur from inhalation of toxic fumes rather than the fire itself. However, if for some inevitable reason the fire cannot be contained, everyone in that particular area must evacuate to avoid any possible casualties. In this research, through a simulation of the CFD, we will observe the soot density concentration which affects evacuation within an onboard fire in relation to the possible evacuation time to conclude a time zone for a safe exit.

• Journal of Biomedical Engineering Research
• /
• v.8 no.1
• /
• pp.29-40
• /
• 1987

2-Hydroxyethyl methacrylate(HEMA) was copolymerized with allyltrimethylsilane- (ATMS) and allylt.imethoxysilane(ATMOS) at 70。C in N, N'dimethylformamide- (DMV) using $\alpha$ , $\alpha$'-azobisisobutyronitrile(AIBN). The compositions of unreacted monomers were determined by gas chromatographic analysis. The monomer reactivity ratios were determined by Fireman-Ross, Helen-Tiidus and intersection methods. The average values are as follows : $$r_1(HEMA) : 6.62 $\pm$ 0.07, r_2(ATMS) : 0.07 $\pm$ 0.01 for HEMA-ATMS system.$$ $$r_l(HEMA) : 4.09 $\pm$ 0.14, r_2(ATMOS) : 0.06 $\pm$ 0.01 for HEMA-ATMOS toys tem.$$ The lower rl(HEMA) In the HEMA-ATMOS system as compared to HEMA ATMS system may be contributed to higher relative reactivity of ATMOS toward the poly(HEMA) radical. The compositions of synthesized copolymers were determined from silicon con tents estimated gravimetrically. The thermal stabilities of the copolymers were investigated by thermogravimetry(TG). The enthalpic changes associated with the endothermic transition were evaluated by differential scanning calorimetry(DSC). The swelling properties of the copolymers in water were also investigated.

• Journal of the Society of Disaster Information
• /
• v.12 no.3
• /
• pp.249-260
• /
• 2016

This paper introduces the results of analysis of questionnaries for developing the effective responding method against social disasters by using ICT technologies. Over 200 peoples including 146 citizens and 55 officials and fireman responded on the questionnaries. In analytical results, approximately 87% citizens answered that the current disaster responding system has some problems, and also over 82% citizens is expecting that ICT is available to reduce the social disaster. For the question of necessity and efficiency of ICT implementation, many officials answered that the information of GIS and facilities would be mostly useful information to respond the social disaster.

• Journal of English Language & Literature
• /
• v.58 no.4
• /
• pp.589-609
• /
• 2012

This research compares a future society described in Ray Bradbury's Fahrenheit 451 (1953) to modern technopoly. The main protagonist of the novel, Guy Montag, is a fireman who burns books in a future society which does not allow people to read or own books. The future society which controls the expansion of knowledge is similar to technopoly which Neil Postman defines as a culture where people passively react to overflow of information. Bradbury compares Montag to several characters, such as his wife Mildred and Captain Beatty. With this comparison, Bradbury lets his readers look back themselves who live in a sea of information without being aware of the domination of technopoly. This research suggests that the reason people do not know that knowledge is controlled and limited is because they do not distinguish between knowledge and information. They misunderstand widely available information is knowledge as characters in Fahrenheit 451 feel stuffed with information. Since the 1990s, scholars and writers such as Neil Postman and Nicholas Carr have expressed problems with the excess of information, however Bradbury already predicted through Fahrenheit 451 in 1953 that the development of technology does not mean a higher level of knowledge. This research suggests what modern human beings have lost in vast amount of information rather than what they have gained.