• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.202-207
• /
• 2009

본 연구에서는 대심도 지하역사에서 화원 위치에 따른 연기거동의 특징을 분석하였다. 전산수치해석에 FDS code가 사용되었다. 화재에 의한 유체거동을 모사하기 위하여 난류모델은 LES를 사용하였으며, 빠른 계산을 수행하기 위하여 병렬수치해석기법을 사용하였다. 본 연구를 통하여 대심도 역사에서 화재시 피난을 저해하는 화원의 위치에 대하여 검토하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.505-507
• /
• 2010

본 논문에서는 대심도 지하철역사의 승강장 종류에 따라 화재시 연기의 전파특성을 비교하였다. 본 연구에서 비교 대상역사로서 상대식 승강장은 서울 숭실대입구역사(47m)로, 섬식은 부산 만덕지하역사(65m)를 선정하여 각 역사에 대하여 화재전산모사를 수행하였다. 해석을 통하여 화재의 연기전파특성을 파악하였으며, 그 결과를 이용하여 각 승강장 종류별로 대심도 지하역사의 방재대책을 세우고자 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.208-213
• /
• 2010

In this study CFD(Computational Fluid Dynamics) analysis of the steady fire-driven fuid flow for the performance test of ventilation at railway tunnel between Heuksok and Nodeul Station from Seoul Metro 9 is performed. There were fans with exhaust and intake modes and each was installed at the middle and both ends of the tunnel. For this test, the pool fire source of methyl alcohol with 1.5MW and smoke generators were installed between the middle of tunnel and Heuksok Station. In this test, the smoke behavior from natural convection was observed for 10 minutes from the ignition of pool fire and then fans with intake-modes at both sides of Heuksok effect of fan-on with intake mode located in the opposite side of the tunnel nearby Heuksok Station on fire-driven fluid flow is studied on when the boundary conditions of fan-on at the tunnel between Heuksok and Nodeul Station are the same as test. FLUENT, a commercial CFD code, is used for this analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1054-1061
• /
• 2009

본 연구에서는 현재 국내외적으로 설치가 이루어지고 있는 PSD에 대하여 설치 유무에 따른 화재유동 변화와 배연효율변화에 중점을 두어 연구를 진행하였다. 시뮬레이션 모델은 대구지하철 중양로 역사이며, 승강장과, 대합실 2개층을 포함하여 화재해석을 수행하였고, 화재해석 프로그램은 FDS를 사용하였다. 역사 전체를 모델링함에 따른 격자수 증가로 많은 계산시간이 소요되므로 병렬처리 기법을 통한 화재해석을 수행하였다. PSD 유무에 따른 화재유동 및 배연효율 변화의 비교를 위하여 화재사나리오를 작성하여 Case 별로 화재해석을 수행하였다. 화재규모는 NFPA-130 을 참조하여 10Mw 상황에서의 화재유동 을 연구하였다. 해석 결과는 NFPA-130을 참고하여 승객안전에 중점을 두어 분석하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.66-72
• /
• 2008

본 연구에서는 대심도 지하역사에서 화재가 발생할 시 급/배기 팬의 동작 유무에 따른 승강장에서의 열 및 연기의 거시적인 거동을 화재시뮬레이션을 통하여 분석하였다. 시뮬레이션 분석결과를 토대로 현재 설치된 급/배기 팬에 대한 제연/배연능력에 대하여 고찰하였다. 본 연구의 대상은 숭실대 입구 역사(7호선, 도시철도공사운영)이며, 숭실대 역사의 승강장은 길이 165m, 폭 23.5m, 깊이 47m 이다. 본 연구에서 전산수치해석을 위한 모델은 선로부 지하터널를 감안하여 전후 각 100m를 추가하였다. 따라서 모델링의 크기는 길이 365m, 폭23.5m, 깊이 47m 이다. 격자는 육면체 정렬격자계를 사용하였으며, 격자의 수는 대략 10,000,000 개가 사용되었다. 빠른 수치전산처리를 위하여, 병렬처리기법을 적용하였다. 본 전산수치해석에 사용된 CPU자원에 Intel 3.0GHZ Dual CPU 6개(core 12개)가 사용되었다.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.115-122
• /
• 2009

Numerical methods are applied to simulate the smoke behavior in a ventilated tunnel using large eddy simulation (LES) which is incorporated in FDS (Fire Dynamics Simulator) with proper combustion and radiation model. In this study, present numerical results are compared with data obtained from experiments on pool fires in a ventilated tunnel. The model tunnel is $182m(L){\times}5.4m(W){\times}2.4m(H)$. Two fire scenarios with different ventilation rates are considered with two different fire strengths. The present results are analyzed with those from LES without combustion and radiation model and from RANS ($\kappa-\epsilon$) model as well. Temperature distributions caused by fire in tunnel are compared with each other. It is found that thermal stratification and smoke back-layer can be predicted by FDS and the temperature predictions by FDS show better results than LES without combustion and radiation model. The FDS solver, however, failed to predict correct flow pattern when the high ventilation rate is considered in tunnel because of the defects in the tunnel-inlet turbulence and the near-wall turbulence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.1984-1989
• /
• 2008

In this study, fire simulations were performed to analyze the characteristics of the fire driven flow and the effects of the platform screen door on the smoke flow in the station, when the fire occurred in the center of the platform. Soongsil Univ. station (line number 7, 47m in depth underground) was chosen which was the one of the deepest underground subway stations in the Seoul metro, SMRT. The parallel computational method was employed to compute the heat and mass transfer eqn's with 6 CPUs of the linux clustering machine. The fire driven flow was simulated with using FDS code in which LES method was applied. The Heat release rate was 10MW and The Ultrafast model was applied for the growing model of the fire source. The 10,000,000 structured grids were used.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.976-982
• /
• 2002

In this study, smoke movement in tunnel fire with natural ventilation shaft has been investigated with various size of fire source. Gasoline pool fire with different size of diameter - 73mm, 100mm, 125mm and 154mm - was used to describe fire source. Experimental data is obtained with 1/20 model tunnel test and its results are compared with numerical results. The computation were carried out using FDS 1.0 which is a field model of fire-driven now. Temperature profiles between measured and predicted data are compared along ceiling and near the ventilation shaft. Both results are in good agreement with each other. In order to evaluating a safe egress time in tunnel fire, horizontal smoke front velocity was measured in model tunnel fire tests and those are compared with numerical results. According to the presence or absence of natural ventilation shaft, ventilation effect are estimated quantitatively. Finally, this paper shows that computational fluid dynamics(CFD) is applicable to predict fire-induced flow in tunnel.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.373-378
• /
• 2011

As the number of deeply-underground subway station(DUSS) increases, the safety measures for DUSS have been requested. In this research, Shingumho station (The line # 5, Depth: 46m) has been selected as case-study for the analysis of smoke-spread speed with the different fire strength. Field test data measured for actual fan in DUSS was applied as a condition of a simulation. The whole station was covered in this analysis and total of 4 million grids were generated for this simulation. The fire driven flow was analyzed case by case to compare the smoke-spread effect according to the fire strength. in order to enhance the efficiency of calculation, parallel processing by MPI was employed and large eddy simulation method in FDS code was adopted.

• 설비공학논문집
• /
• 제18권4호
• /
• pp.344-350
• /
• 2006

The present study investigates the characteristics of fire-driven heat flows and gas concentration in a compartment fire by using the modified VHS model (MVHS). The main idea of this model is to add some source terms for combustion products and oxygen consumption to the original VHS model for providing more accurate and useful information on gas concentration distributions as well as thermal fields. It is found that the present MVHS model shows fairly good agreement with the experimental data and the eddy breakup combustion model. The tilting angle of fire plume calculated by MVHS is larger than that of EBU model because the fire source of VHS is affected by ventilating flow less than EBU. However, this discrepancy is apparently reduced in the downstream region of fire source.