• 제목/요약/키워드: Fire Safety Test

검색결과 543건 처리시간 0.022초

불연성 무기 단열재를 화재확산 방지구조로 적용한 외단열 마감시스템의 화재성능 (Effect of External Thermal Insulation Composite System with a Non-combustible Calcium Silicate Based Mineral on The Mitigation for Reducing Fast Spread of Flame)

  • 이종찬;박종철;송훈
    • 한국건축시공학회지
    • /
    • 제16권5호
    • /
    • pp.397-403
    • /
    • 2016
  • 건축물의 에너지 절약기준이 강화됨에 따라 단열성능이 우수한 외단열 공법의 적용이 증가 추세에 있으나, 빈번한 화재사고로 외단열 화재확산 방지를 위한 규정이 강화되었다. 따라서, 기존 EPS 외단열 시스템의 단열성능을 확보하면서 화재안전성을 향상하기 위하여 불연성 단열재를 화재확산 방지구조로 적용한 EPS 외단열 시스템의 대형 화재시험을 ISO 13785-2에 의하여 수행하였고, 그 결과, 시간에 따른 시험체의 외형분석에서 EPS 단열재만 사용한 외단열 공법보다 우수한 화재확산 방지효과가 있는 것으로 판단되었고, 온도 및 열류량 측정결과에서도 하단부보다 상단부의 온도 및 열류량이 낮게 측정되어 차열효과가 있는 것으로 판단되었다.

가연성 배기덕트-흄 화재위험성 평가에 관한 연구 (A Study on the Fire Risk Assessment of Combustible Exhaust Duct-fume)

  • 윤여송;이영순
    • 한국안전학회지
    • /
    • 제25권1호
    • /
    • pp.32-37
    • /
    • 2010
  • When back-out & firing Process applies heat, hume is piled up in exhaust duct by organic compound and it have high dangerousness. There by, the process is happening a lot of damage that is exhaust duct fire. However we do not have certain fire dangerousness estimation and digestion countermeasure. So we need preventive measure. Back-out & firing is a process which has fine structure, electrical and mechanical characteristics, such as firing kiln and back-out kiln which has pipe line and box type. The box oven is made of heating coil, fan motor and control panel. Back-out & firing process has air circulation institution of quick ventilation type. When we operate this process for long time, fire can break out easily. Duct is made by zinc shredder. If fire breaks out in duct inside, fire by deposit fume can be dispersed easily. Accordinglym, This project estimate danger for back-out & firing process exhaust duct through real fire test. And there is purpose of study to establish preventive measure.

Experimental studies on the behaviour of headed shear studs for composite beams in fire

  • Lim, Ohk Kun;Choi, Sengkwan;Kang, Sungwook;Kwon, Minjae;Choi, J. Yoon
    • Steel and Composite Structures
    • /
    • 제32권6호
    • /
    • pp.743-752
    • /
    • 2019
  • Steel and concrete composite structures are commonly applied in multi-story buildings as they maximise the material strength through composite action. Despite the popularity of employing a trapezoidal deck slab, limited experimental data are available under elevated temperatures. The behaviour of the headed shear stud embedded in a transverse trapezoidal deck and solid slab was investigated at both ambient and fire conditions. Twelve push-out tests were conducted according to the ISO 834 standard fire utilising a customised electric furnace. A stud shearing failure was observed in the solid slab specimen, whereas the failure mode was changed from a concrete-dominated failure to the stud shearing in the transverse deck specimen with an increase in temperature. Comparisons between the experimental observations and design requirements are presented. The Eurocode design guidance on the transverse deck slab gives a highly conservative estimate for shear resistance. A new design formula was proposed to determine the capacity of the shear connection regardless of the slab type when the stud shearing occurs at high temperatures.

터널내 화재시 PIV를 이용한 연기제어 특성에 관한 연구 (A Study on the Characteristics of Smoke Control using PIV in Tunnel Fires)

  • 고재웅;김종윤;서태범;임경범;이동호
    • 한국안전학회지
    • /
    • 제21권5호
    • /
    • pp.6-11
    • /
    • 2006
  • This study aims to measure a smoke density and velocity by using the PIV method in case a fire occurs in tunnels. By doing so, this will estimate a critical velocity, examine its appropriateness, and present the basic materials necessary for designing a smoke control equipment. For this study, a visualization test was conducted based on the 1/20 miniature of a real tunnel according to the Froude scaling. As a part of basic experiments, a correlation between smoke density and brightness was analyzed here, and a critical velocity was estimated on the condition that a fire breaks out in tunnels. As a result, this study finds that there is a correlation between smoke density and brightness within a range of 100% to 30% transmittance, from which a quantitative smoke density can be obtained. The study also suggests that a critical velocity calculated from the Kennedy formula shows about 10% difference from that estimated in the test.

룸코너 시험기의 발열량 측정에 대한 불확도 산정 (Calculation of Uncertainty in Measuring Heat Release Rate in Room Corner Test)

  • 노광철;김치훈;이승철;이덕희
    • 한국화재소방학회논문지
    • /
    • 제26권1호
    • /
    • pp.16-22
    • /
    • 2012
  • 화재시험에 있어서 정확한 발열량의 측정은 시험체의 화재 안정성을 결정하기 위한 중요한 정보이다. 발열량 측정값은 측정 인자들의 오차에 기인하여 영향을 받는다. 본 연구에서는 한국철도기술연구원에 설치된 룸코너 시험기에 대한 불확도의 인자를 분석하였고 이를 이용하여 KTX 내장재 화재시험의 발열량 측정 불확도를 계산하였다. 화재 발열량 불확도 계산 결과, 화재시작단계에서 불확도가 매우 높은 값으로 나타났고 화재가 성장하면서 불확도는 점차적으로 감소하였다. 불확도 인자들 중 산소 농도가 발열량 측정 불확도에 가장 크게 기여하는 것으로 나타냈다.

소방공무원의 방화복 착용 후 단계별 운동강도 변화 시 의복 내 온도·습도·발한량 차이 (The change in temperature·humidity·perspiration of fire suit when applying phased intensive exercises to fire fighter wearing fire suit)

  • 최서연;박일규;공일천;이동호
    • 대한안전경영과학회지
    • /
    • 제15권4호
    • /
    • pp.97-103
    • /
    • 2013
  • The purpose of this study was to verify the change in temperature humidity perspiration of fire suit when applying phased intensive exercises to fire fighter wearing fire suit. For this study, three male fire fighters took basic physical test and performed 10 minute phased intensive exercises -exercise intensity I (30%VO2max), exercise intensity II (45%VO2max), exercise intensity III (60%VO2max) based on maximum oxygen consumption (VO2max)- wearing fire suit (helmet, boots, air respirator) in treadmill and took a rest. The result of study shows that the temperature in the suit elevated during stabilization period after each exercise intensity, humidity elevated as exercise intensity increased, perspiration elevated as exercise intensity increased. This study indirectly ascertained the fire suit's physiological change in fire fighters during field activities.

화재조사전문교육 및 자격증제도 개선에 관한 연구 (A Study on Improvement of Professional Fire Investigation Education and Certification System)

  • 고기봉;이시영
    • 한국화재소방학회논문지
    • /
    • 제23권5호
    • /
    • pp.32-42
    • /
    • 2009
  • 본 연구는 국내의 화재조사전문교육 운영 실태를 분석하고 개선방안을 도출하는데 있다. 연구결과 현재의 화재조사전문교육은 공적영역(소방, 경찰, 전기안전공사, 가스안전공사 등) 중심으로 이루어지고 있으며 중앙소방학교에서 실시하고 있는 교육이 가장 체계적인 것으로 나타났다. 그리고 사적영역(화재피해이재민, 일반국민 등)을 대상으로 하는 화재조사전문교육은 거의 이루어지고 있지 않는 것으로 나타났다. 이러한 문제점을 개선하기 위해서 현행 중앙소방학교를 평생교육체제로 전환하여 대학의 학위과정과 연계하고 소방방재청에서 시행하고 있는 화재조사관자격증 제도를 외부에 개방 및 학습수준별 5단계로 나누어 운영할 것을 제안하였다.

산불진화대원용 안전헬멧에 대한 성능평가 기준 연구 (Performance Evaluation Criteria for Safety Helmets of Forest Firefighting Crews)

  • 홍승태;정재한;김성용;권춘근
    • 한국화재소방학회논문지
    • /
    • 제33권5호
    • /
    • pp.66-77
    • /
    • 2019
  • 산불진화대원의 안전 확보와 작업능률 향상을 위해 안전헬멧에 대한 성능평가 기준을 개발하였다. 산불진화대원용 안전헬멧에 대한 기준이 현재 국내에 없기 때문에 한국소방산업기술원(KFI)에서 운용중인 소방대원용 헬멧에 대한 기준을 기초로 하여 연구를 시작하였다. 관계자 의견 수렴 및 외국 기준의 검토를 통하여 26개 시험항목 중 15개 시험항목을 제외하고 11개 시험항목을 선정하였다. 2 종류의 일반 안전헬멧과 하나의 소방대원용 헬멧을 시료로 하여 KFI 기준을 적용하여 시험하고 그 결과를 비교하였다. 시험 결과 일반 안전헬멧은 착장체와 턱끈의 기능이 기준에 미달하였고 특히 PE나 ABS 재질은 열에 취약함을 확인하였다. KFI 기준과 ISO 16073, NFPA 1977, NFPA 1971 및 BS EN 443의 판정기준을 비교하여 우리나라 산불진화대원들의 작업 환경에 적합한 11개의 시험항목과 판정기준을 최종 선정하였다.

불활성가스 미분무소화설비의 개발 -화재시험실의 급기에 관한 수치연구- (Development of an Inert Gas Water Mist System -A Numerical Study on Ventilation of the Fire Test Room-)

  • 박외철;정이규
    • 한국가스학회지
    • /
    • 제12권1호
    • /
    • pp.25-30
    • /
    • 2008
  • 불활성가스 미분무소화설비의 실험용으로 제작된 $2.5m{\times}2.0m{\times}2.5m$ 크기의 화재시험실에 급기부족 여부를 확인하기 위해, 화재시험실 내 프로판가스 풀(pool) 화재에 대한 수치연구를 수행하였다. 결과의 일관성을 확인하기 위해 설계 화재규모인 60 kW와 그 2배인 120 kW에 대하여 창문의 개폐에 따른 온도 및 일산화탄소 농도의 변화를 조사하였다. 두 화재규모에서 모두 창문의 개폐가 온도 및 CO농도의 변화에 미치는 영향이 작음을 확인하였고, 따라서 급기부족의 발생이 없음을 알 수 있었다.

  • PDF