• 제목/요약/키워드: Finish

검색결과 1,271건 처리시간 0.032초

무연솔더 도금된 리드프레임에서 Sn 위스커의 성장과 구조 (Structure and Growth of Tin Whisker on Leadframe with Lead-free Solder Finish)

  • 김경섭;임영민;유정희
    • 마이크로전자및패키징학회지
    • /
    • 제11권3호
    • /
    • pp.1-7
    • /
    • 2004
  • 주석 도금은 특정 환경하에서 위스커를 발생시키며, 이는 전자부품의 불량을 초래한다. 최근 세계곳곳에서는 환경보호를 위해 "무연"의 사용을 권고하고 있다. 본 논문에서는 두 종류 무연 도금 재료에서 도금 온도와 신뢰성시험 하에서 성장하는 위스커를 평가하였다. 도금 온도가 높아질수록 표면에 형성되는 도금 입자의 크기는 커지고, 위스커의 성장은 작아진다. 또한 온도 순환시험에서 성장한 위스커는 무광택 Sn 도금은 굽은 모양을, 무광택 Sn-Bi에서는 줄무의 모양이 관찰되었고, Sn 도금에 비해 Sn-Bi에서 위스커가 작게 성장하였다. 무광택 Sn 도금된 FeNi42 리드프레임은 TC 300 사이클에서 직경이 $7.0{\~}10.0{\mu}m$이고, 길이가 $25.0{\~}45.0{\mu}m$인 위스커가 성장하였다. 또한 Cu는 300 사이클에서는 표면에 노듈(핵 상태)만이 관찰되었고, 600 사이클에서 길이가 $3.0{\~}4.0{\mu}m$의 위스커로 성장하였다. TC 600 사이클 후 FeNi42는 계면에서 ${\~}0.34{\mu}m$의 얇은 $Ni_3Sn_4$가, Cu에서는 두께가 $0.76{\~}l.14{\mu}m$$Cu_6Sn_5$${\~}0.27{\mu}m$$Cu_3Sn$ 화합물들이 두껍게 성장하였다. 따라서 FeNi42 리드프레임은 열팽창계수의 차이, Cu에서는 금속간 화합물의 형성이 위스커의 성장에 영향을 미치는 주요 인자이다.

  • PDF

무전해 Ni(P)과 무연솔더와의 반응 중 금속간화합물의 spalling 현상에 관한 연구 (Spalling of Intermetallic Compound during the Reaction between Electroless Ni(P) and Lead-free Solders)

  • 손윤철;유진한;강성권;;이택영
    • 마이크로전자및패키징학회지
    • /
    • 제11권3호
    • /
    • pp.37-45
    • /
    • 2004
  • 무전해 Ni(P)는 솔더링 특성과 부식저항성이 우수하고 표면 거칠기가 적으며 원하는 금속 상에 선택적으로 도금이 가능하여 전자패키지에서 반도체칩과 기판의 표면 금속층으로 촉 넓게 사용되고 있다. 그러나 솔더와의 반응 중 금속간 화합물의 spalling과 솔더 조인트에서의 취성파괴 문제가 성공적인 적용의 걸림돌이 되어 왔다. 본 연구에서는 각각 조성이 다른 세가지 Ni(P)막 (4.6,9, and $13 wt.\%$ P)을 사용하곡 솔더와의 반응시 무전해 Ni(P)막의 미세구조 및 상 변화와 금속간화합물의 spatting 거동을 면밀히 조사하였다. $Ni_3Sn_4$ 화합물 아래로 침투한 Sn과 P-rich layer ($Ni_3P$)와의 반응에 의해 $Ni_3SnP$ 층이 형성되며 $Ni_3SnP$ 층이 성장함에 따라 $Ni_3Sn_4$가 spalling됨이 관찰되었다. Spalling 후에는 Ni(P)막이 용융된 솔더와 직접 접촉하게 되어 Ni(P)막의 결정화가 가속화되고 $Ni_3P$상이 $Ni_2P$상으로 변태되었다. 또한 이러한 결정화 과정 중 Ni(P)막의 부피가 감소됨에 따라서 인장응력이 발생하여 막 내부에 크랙이 발생하였다.

  • PDF

간이식 환자의 출혈 경향과 치과적 고려 사항 (The Risk of Bleeding in Liver Transplant Patients and Dental Considerations)

  • 박원서;백윤재;도레미;김기덕;정복영;방난심;윤희정;유태민
    • 대한치과마취과학회지
    • /
    • 제12권3호
    • /
    • pp.157-163
    • /
    • 2012
  • Background: The major goal of dental management before and after liver transplantation is the prevention of bacteremia from an oral source that could lead to systemic infection. However dental treatment in liver transplant patients have the risk of infection and bleeding. so it is needed special dental consideration. Methods: 42 liver transplant candidates who visited department of Advanced General Dentistry in Yonsei University College of dentistry from March 1, 2010 to February 29, 2012 were selected. The clinical data of those patients were analyzed; coagulation status such as PT, INR, aPTT, platelet count before and 6 months after liver transplantation, dental infectious foci, time interval between dental visit and operation date of liver transplantation. Results: Before liver transplant, the patient's PT and INR was prolonged, and the platelet count was lower than normal range. But 6 months later from liver transplantation, most of the figures turned into a normal range. The dental infection foci were chronic periodontitis, dental caries, chronic apical periodontitis, root rest et al but we did extraction of 6 root rest before liver transplantation and postponed other treatment after liver transplantation due to bleeding and infection risk of patients. Because of insufficient interval between dental visit and operation date, 64.3% of patients could not finish the dental treatment. Conclusions: The patients before liver transplantation have the risk of bleeding. The treatment of those patient should be removal of only factors that can cause dental infections after transplantation and other treatment must be postponed until the stable period of the transplant that patient's condition has improved.

토마토 코이어 자루재배시 적정 급액마감시각 구명 (Appropriate Daily Last Irrigation Time in Coir Bag Culture for Tomato)

  • 김성은;심상연;이문행;김영식
    • 생물환경조절학회지
    • /
    • 제21권1호
    • /
    • pp.12-19
    • /
    • 2012
  • 코이어 자루재배시 일중 급액마감시각을 달리함으로써 최적 생장을 유지하면서도 용수이용효율(WUE)와 비료이용효율(FUE)를 높이기 위해 실험을 실시하였다. 급액마감시각에 따라 일몰 1시간 전부터 4시간 전까지 4단계로 나누어 처리한 결과, 하루 동안의 배지 내 수분함량은 마감시각의 영향을 크게 받는 것으로 나타났는데, 급액마감시각이 빠를수록 일일 수분함량 변화폭이 컸다. 그러나 일일급액횟수는 급액마감시각의 영향이 크지 않았는데 이는 급액제어 시스템으로 배액전극 제어법을 사용한 것과 코이어 배지의 이화학적 특성 때문으로 판단되었다. 최종 생육은 통계적 유의차를 보이지 않았다. 상품과량은 일몰 2시간 전 처리에서 가장 많았고, 4시간 전 처리에서 가장 적었다. 급액마감시각 처리별 128일 동안의 급액량을 조사한 결과, WUE와 FUE는 일몰마감 4시간 전 처리에서 가장 낮았고, 2시간 전 처리에서 가장 높았다. 식물생육, 수확량 및 WUE와 FUE 등의 면에서 일몰 1시간 전 처리와 4시간 전 처리는 경제적인 면에서 바람직하지 않았고, 2시간 전에 급액을 마감하는 것이 가장 경제성이 좋을 것으로 사료된다.

치료중단행위에 대한 의료형법적 고찰 -의학적 충고에 반한 퇴원 사례를 중심으로- (A Study on Medical-criminal Problem of Withdrawing Life-Sustaining Treatment)

  • 조인호
    • 의료법학
    • /
    • 제9권1호
    • /
    • pp.319-382
    • /
    • 2008
  • As a withdrawing care's study, the purpose of this study is searching about withdrawing care's acceptance and circumstances through Bora-mae hospital case(chapter 1). Withdrawing life-sustaining treatment has various forms. Though the meaning of euthanasia, death with dignity, natural death, physician assisted suicide are duplicated, the meaning of those are different slightly. Firstly, this study looks about the difference of the those meaning and acceptance range(condition) by withdrawing care's forms(chapter 2). Bora-mae hospital case sentenced guilty about physician who discharged incompetent patient who was after surgery by patient's wife determination. This Bora-mae case that sentenced guilty about discharge against medical advise(DAMA) that is regarded to custom has brought intensive confliction of legal, social, medical aspect, Bora-mae hospital case has many legal problems. First, as to criminal law rule 250(murder), the problem is whether discharge and withdrawing life-sustaining treatment is commission or omission. this study concluded omission(district court: omission, appeal, supreme court: commission). Because legal denounce point of discharge and medical treatment withdrawing is omission that physician who is obligatory on patient to cure. If physician's act is regarded omission, it is necessary to determine whether he has guardian status and obligation. Without guardian status and obligation, omission crime can't exist. This study decided that physician had guardian status and obligation and foundation of guardian status was pre-action or acceptance of emergency patient. Physician's medical treatment duty finished when patient(or patient's guardian) demands discharge. But when patient death is foreseen and other possible treatment does not exist, his duty of life prolonging treatment does not finish. This originate from physician's social responsibility and public status that limits patient's private liberty. This study regarded physician's action as accomplice about whether physician's discharging action is accomplice or the principal offender(district court: the principal offender, appeal, supreme court: accomplice). Though the principal offender needs criminal determination and action, there is no this common determination and functional action control of physician in Bora-mae case(chapter 3). Bora-mae hospital case partly originated from deficiency of legal, institutive system including medical security system shortage, the instruction is 1. medical security system strengthening, 2. hospital ethical committee's activity strengthening, 3. institutionalization of withdrawing life-sustaining treatment, 4. acceptance of pre-decision making system, 5. sufficient persuasion of physician for patient and faithful writing of medical paper, 6. respect for patients' self-determination and rights, 7. consciousness's changing for withdrawing life-sustaining treatment and persistent education about medical ethics(chapter 4). Considering Bora-mae case, medical sector is not the dead ground of a criminal punishment. Intervention of criminal law in medical sector give rise to ill effect, that is, excess medical examination and treatment, safeguard treatment, delay of discharge from a hospital. Because sufficient guarantee of life becomes mere empty slogan under situation that impose a burden of heavy cost to family or hospital, public and systematic solution should be given(chapter 5).

  • PDF

일본의 기술자교육인정평가의 실제와 문제점에 관한 연구 (A Study On The Current State And Argument Over the Accreditation of Engineering Education In Japan)

  • 신동은;최금진;임승순
    • 공학교육연구
    • /
    • 제14권1호
    • /
    • pp.20-31
    • /
    • 2011
  • 본 연구는 공학교육 인증제를 시작한 시기나 공학교육이 진행되어 온 문화적 풍토가 어느 정도 유사한 일본의 인증제 운영 상황을 분석함으로써 한국의 인증제 운영에 유의미한 시 사점을 얻고자 시도되었다. 본 연구는 첫째, "accreditation"의 번역어로서 일본의 JABEE가 채택하고 있는 "평가인정"과 공인원이 채택하고 있는 "평가인증"의 개념 정의를 하였고, 둘째, 평가주체, 평가목적, 평가절차, 평가결과 활용 등의 측면에서 일본의 평가인정의 개요를 조사하였고, 셋째, JABEE의 인정기준별로 심사항목 및 프로그램의 준비상황을 분석하였고, 넷째, 공학교육인정제를 둘러싼 논의사항을 정리하였다. 이를 기초로 본 연구에서 제시한 시사점은 다음과 같다. 첫째, 인증평가는 전문분야별 평가로서 학회를 보다 실질적으로 활용해야 한다. 둘째, 가급적 서류 작업을 줄이고 인증제의 본질적인 목적에 보다 충실한 평가를 할 수 있도록 인증기준을 개정하고 기본적인 템플릿을 제공할 필요가 있다. 셋째, 평가자 교육을 강화하기 위하여 일본의 옵저버 제도를 참고할 필요가 있다. 넷째, 인증 프로그램 및 졸업생에 대한 혜택을 주기 위한 노력을 강화해야 한다. 다섯째, 프로그램의 개선 시스템이 평가 결과를 기초로 교과목의 실질적인 개선을 유도할 수 있는 방향으로 조직되어야 한다. 여섯째, 학습성과 달성도 평가에서 교과목의 활용을 고려할 필요가 있다. 일곱째, 공인 원의 인증활동에 대하여 메타평가(meta-evaluation)를 받음으로써 인증활동에 대한 권위와 정당성을 부여받을 필요가 있다.

소프트웨어 에이전트를 위한 협상 결정함수에 관한 연구 (A Study on Negotiation Decision Functions for Software Agents)

  • 김중한
    • 한국산업정보학회논문지
    • /
    • 제8권3호
    • /
    • pp.76-84
    • /
    • 2003
  • 소프트웨어 에이전트에 의해서, 일상 업무는 자동화 되어왔으며, 그에 따라 사람이 담당하는 업무는 특정 업무범위로 축소되고 있다. 그러나 아직까지 대부분의 에이전트는 전체 업무 프로세스의 일부 단계에서만 그 역할을 수행할 뿐이다. 자동화 업무에서의 주요 단계에서 사용자들을 지원하기 위하여 특정 방향으로 협상 당사자들을 설득하는 데 있어서 소프트웨어 에이전트의 역할은 필수적이다. 사용되는 협상의 종류는 매우 여러 가지 이지만, 본 논문은 '협상에 기초한 경쟁적 비즈니스 환경' 과 같은 특정 협상행위에 중점을 두고 있다. 이러한 환경에서의 협상을 위해서 자율적 에이전트는 환경적 변수(예: 협상 경쟁자 수, 각 협상 참여자 수, 협상업무가 완료되는 최대한의 시간, 사용자의 선호도)를 중점적으로 고려하고 있다. 경쟁적 비즈니스 환경에서는 협상진행 중에 끼어 들어 계약을 성사시키는 잠재 협상 경쟁자들이 있지만 자동화된 협상을 위하여 제안된 이전의 협상 결정함수들은 단지 시간이나 정해진 수의 협상참여자들만을 변수로 사용해왔다. 따라서 본 논문은 경쟁적 시장환경에서 잠재적 경쟁자에 대한 고려가 포함된 협상 결정 함수와 그러한 고려사항이 포함되지 않은 협상 결정 함수에 대한 기능의 평가를 시도했다. 이 평가를 위해서 본 논문은 다수의 구매자와 판매자가 제한된 자원을 위해 한 공간에서 경쟁하는 전자상거래 시장을 적용 범위로 선택했다.

  • PDF

조선조 가구의 장식적 표현기법과 무늬의 특징-덴마크와 한국의 민속가구 비교를 중심으로- (The Characteristics of Ornamental Technique and Motifs in Folk Furniture of Chosun Dynasty-In Reference to a Comparison between Danish and Korean Folk Furniture-)

  • 최정신
    • 한국실내디자인학회논문집
    • /
    • 제12호
    • /
    • pp.57-66
    • /
    • 1997
  • This study was carried out to find out some similarities and differences of the ornamental technique and motifs in folk furniture between Denmark and Korea which had quite different background of development of folk furniture as one of a cross-cultural study. Furniture made and used in the 18th and 19th century was investigated in order to eliminate the influence of internationalism in the design area in the 20th century. This study was fulfilled by many study trips all over the districts in Denmark to identify Danish folk furniture as well as literature study. Study trips to folk museums. Insa-dong, Janghanpyung furniture market were done for Korean folk furniture. Characteristics of ornament in Danish folk furniture were as followings; Main materials of the Danish folk furniture were conifers, especially pine tree, as pine was very common and easy to get from their surroundings. The most popular and unique types of decoration in Danish folk furniture was painting. Colors used in painted furniture were very bright and vivid. This might be a reaction to the long and dark winter of Scandinavian countries. Motifs used in Danish folk furniture had been chosen to reflect their surroundings. Flowers, six-angular stars, animals, human figures and Biblical motifs were popular sources of decoration for Danish folk furniture. Characteristics of Korean folk furniture were as followings; Main materials of Korean folk furniture were broad-leaved trees as well as conifers, because of their beautiful wood grain. The Korean ways of decoration were different from Danish ones. The method of painting with bright from Danish ones. The method of painting with bright colors was hardly ever used in Korea, except only in lacquering. The most popular decoration method for Korean folk furniture was revealing the natural wood grain with transparent vegetable oil finish, instead of painting. Metal ornament was unique to Korean folk furniture. therefore a lot of metal ornaments were attached on the furniture. Motifs used in Korean folk furniture were more like symbolic than Danish ones. Korean people tried to express their longings and norms through the motifs, such as longevity, prosperity, good luck, and many sons, etc. Therefore, it was natural for Korean motifs to have special symbolic meanings.

  • PDF

학부과정의 다학제 융합 교과 수업경험에 관한 내러티브 탐구 - 수업 개선을 중심으로 - (Narrative Inquiry about Practical Experience of an Interdisciplinary Undergraduate Class of Design and Engineering - Focusing on an improvement of the class -)

  • 이상선;김동민;김미희;김수찬;김한중;이인석;박경문
    • 대한공업교육학회지
    • /
    • 제40권1호
    • /
    • pp.121-141
    • /
    • 2015
  • 본 논문은 3년간(2012~2014) 학부에서 진행된 다학제 융합수업 개선을 위하여 융합 교육과정, PBL(Problem Based Learning)과 TBL(Team Based Learning)의 활용, 효과적인 발표 등에 대한 딜레마를 다루었으며, 내러티브 탐구 방법으로 시간, 장소, 교육과정에서 일어나는 교사와 학생의 상호작용을 기술한 연구이다. 본 연구 결과로부터 도출된 몇 가지 수업 개선점을 제안하면 아래와 같다. 첫째, 융합수업에서 교수들의 미니 강의비율이 대체로 높다. 강의시간을 1/4로 줄이고 수업시간에 중요한 토론과 과제를 마칠 수 있도록 시간을 배려하고, 즉각적인 도움을 제공한다면 학생들의 과제부담은 줄어들 것이다. 둘째, 기존의 교육과정 틀을 유지한 채 융합수업을 시행하기 위해서는, 각 학과 전공교육과정에 '융합교과목'이라는 과목을 설치하여 다른 학과 교수와 함께 수업을 개설할 기회를 제공하는 것이 좋다. 셋째, 본 수업에서 PBL과 TBL를 동시에 적용하는 효율적인 수업진행 방식은, TBL에서 요구하는 과제를 하나의 문제 상황으로 생각하고 PBL 학습방법을 활용하는 것이다. 마지막으로, 이상적인 발표수업은 매시간 발표할 기회를 학생에게 제공하는 것이 바람직하다. 팀 발표수업의 횟수는 한 학기 3번이 적당하지만, 발표시간이나 방법은 수정이 필요하다. 발표 전날 모든 팀으로부터 발표내용을 받고, 팀 발표시간은 15분에서 30분으로 늘리고 2일 동안 발표를 한다면 학생은 발표 준비와 진행에 여유를 갖게 될 것이다.

효율적인 품질관리를 위한 공동주택 하자위험 분석 (Assessment of Defect Risks in Apartment Projects based on the Defect Classification Framework)

  • 장호면
    • 한국산학기술학회논문지
    • /
    • 제20권11호
    • /
    • pp.510-519
    • /
    • 2019
  • 공동주택 설계 및 시공단계에서 다양한 하자를 사전에 예방하기 위하여 다양한 방안이 모색됨에도 불구하고, 완공 이후 다양한 하자들이 지속적으로 발생하고 있다. 이러한 공동주택 하자를 최소화하기 위해서는 하자 위험에 대한 패턴을 확인할 필요가 있다. 이러한 관점에서 본 연구에서는 공동주택 공종/하자보수보증기간/하자위치/하자유형을 고려한 하자분류체계를 설정하고, 세부적인 하자위험을 분석하였다. 이를 위하여 본 논문에서는 공동주택 하자분쟁사례 133건, 약 15,056개의 하자데이터를 토대로 분석을 실시하였다. 주요 분석결과를 살펴보면, 첫째, 공용부의 RC 공사와 관련된 주요 하자는 균열이며, 균열과 연계되어 있는 누수 및 표면불량 등도 하자위험이 높은 것으로 확인되었다. 둘째, 다양한 자재가 활용되고, 복합적인 공종이 이루어지는 마감공사의 특성에 따라 상대적으로 하자위험이 높은 것으로 나타났다. 셋째, 지하주차장에 대한 방수공사의 경우 오시공이나 미시공과 같이 재시공이 필요한 하자들의 위험도가 상대적으로 높은 것으로 확인되었다. 이를 토대로 본 연구에서는 발생위험이 높은 하자들을 LFHS, LFLS, HFLS 영역으로 구분하여 시공단계, 입주 전단계, 유지관리단계 등에서의 하자대응방안을 모색하였다.