• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.565-578
• /
• 2012

Sedimentary facies of the Middle to Upper Cambrian Sesong Formation, Taebacksan Basin, are analyzed using detailed field mapping and stratigraphic section measuring. As a result, five sedimentary facies are recognized in the formation, which include lime nodule bearing shale facies, anastomosing wackestone-packstone facies, well-laminated siltstone facies, fine to medium sandstone facies and lime pebble conglomerate facies. Together with sedimentary facies analysis, study on vertical facies variation indicates that the Sesong Formation was deposited in an outer to inner shelf during relative sea-level fall. Especially, shallow marine aspects of the upper part of the Sesong Formation including 10-m-thick, fine to medium-grained sandstones appear to be very similar with the shallow marine strata accumulated during the Steptoean Stage (Dunderbergia) in Laurentia. These lithofacies comparisons of coeval strata between two continents suggest that sedimentation in the Sesong Formation reflects the influence of global sea-level fall occurred during the late Middle Cambrian to early Late Cambrian. As well, a stratigraphic discontinuity surface that may have sequence stratigraphic significance is recognized within the shallow marine sandstone beds of the uppermost Sesong Formation. This stratigraphic discontinuity surface may correspond to the Sauk II-III sequence boundary in Laurentia. Therefore, results delineated in this study will use a new stratigraphic paradigm for regional correlation of the Middle to Late Cambrian strata (e.g., the Sesong Formation) in the Taebacksan Basin, and will provide very useful information on intercontinental stratigraphic correlation in the future.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.35-40
• /
• 2011

While high-definition precipitation maps with a 270 m spatial resolution are available for South Korea, there is little information on geospatial availability of precipitation water for the famine - plagued North Korea. The restricted data access and sparse observations prohibit application of the widely used PRISM (Parameter-elevation Regressions on Independent Slopes Model) to North Korea for fine-resolution mapping of precipitation. A hybrid method which complements the PRISM grid with a sub-grid scale elevation function is suggested to estimate precipitation for remote areas with little data such as North Korea. The fine scale elevation - precipitation regressions for four sloping aspects were derived from 546 observation points in South Korea. A 'virtual' elevation surface at a 270 m grid spacing was generated by inverse distance weighed averaging of the station elevations of 78 KMA (Korea Meteorological Administration) synoptic stations. A 'real' elevation surface made up from both 78 synoptic and 468 automated weather stations (AWS) was also generated and subtracted from the virtual surface to get elevation difference at each point. The same procedure was done for monthly precipitation to get the precipitation difference at each point. A regression analysis was applied to derive the aspect - specific coefficient of precipitation change with a unit increase in elevation. The elevation difference between 'virtual' and 'real' surface was calculated for each 270m grid points across North Korea and the regression coefficients were applied to obtain the precipitation corrections for the PRISM grid. The correction terms are now added to the PRISM generated low resolution (~2.4 km) precipitation map to produce the 270 m high resolution map compatible with those available for South Korea. According to the final product, the spatial average precipitation for entire territory of North Korea is 1,196 mm for a climatological normal year (1971-2000) with standard deviation of 298 mm.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.31.2-31.2
• /
• 2008

We present the results offar ultraviolet (FUV, 1350-1750 ${\AA}$) auroral observations made by the Far-ultraviolet IMaging Spectrograph (FIMS) instrument on the Korean microsatellite STSAT-1. The instrument was capable of resolving spatial structures of a few kilometers with the spectral resolution of 2-3 ${\AA}$. The observations were carried out simultaneously with the measurement of precipitating electrons using an electrostatic analyzer (ESA, 100 eV-20 keV) and a solid state telescope (SST, 170 keV-360 keV) on board the same satellite. With a careful mapping of the field lines, we were able to correlate the particle spectrum to the corresponding FUV spectrum of the footprints of the FIMS image that varied significantly in fine scales. We divided the FIMS spectral band into the LBH long (LBHL, 1640-1715 ${\AA}$) and LBH short (LBHS, 1380-1455 ${\AA}$) bands, and compared the electron energies with the intensities of LBHL and LBHS for the well-defined inverted-V structures. The result shows a strong correlation between the total LBH intensity and the energy flux measured by ESAwhile the peak energy itself does not correlate well with the LBH intensity. On the other hand, it was observed that the ratio of the LBHL intensity to that of LBHS increased significantly as the peak electron energy increased, primarily due to a smaller absorption by O2 at LBHL than at LBHS.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1797-1801
• /
• 2005

SLAM(Simultaneous localization and mapping) and AI(Artificial intelligence) have been active research areas in robotics for two decades. In particular, localization is one of the most important issues in mobile robot research. Until now expensive sensors like a laser sensor have been used for the mobile robot's localization. Currently, as the RFID reader devices like antennas and RFID tags become increasingly smaller and cheaper, the proliferation of RFID technology is advancing rapidly. So, in this paper, the smart floor using passive RFID tags is proposed and, passive RFID tags are mainly used to identify the mobile robot's location on the smart floor. We discuss a number of challenges related to this approach, such as RFID tag distribution (density and structure), typing and clustering. In the smart floor using RFID tags, because the reader just can senses whether a RFID tag is in its sensing area, the localization error occurs as much as the sensing area of the RFID reader. And, until now, there is no study to estimate the pose of mobile robot using RFID tags. So, in this paper, two algorithms are suggested to. We use the Markov localization algorithm to reduce the location(X,Y) error and the Kalman Filter algorithm to estimate the pose(q) of a mobile robot. We applied these algorithms in our experiment with our personal robot CMR-P3. And we show the possibility of our probability approach using the cheap sensors like odometers and RFID tags for the mobile robot's localization on the smart floor.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.26-26
• /
• 2017

Seed germination stimulated by light is said to be photoblastism. Photoblastism has not been reported in cereal crops, especially in the rice, but Korean weedy rice was reported to have photoblastism and longer mesocotyl than cultivar. Photoblastic weedy rice (PBR) was used to identify QTLs for photoblastism and mesocotyl length. In previous works, QTLs for photoblastism, pbr1 and pbr12 were identified on chromosomes 1 and 12 using 124 F4 lines from a cross between Ilpum and PBR using bulked segregant analysis. Two QTLs for mesocotyl elongation, qMel-1 and qMel-3 were mapped on chromosomes 1 and 3 120 F8 lines from the same cross. Of interest, the RM8260-RM246 region of pbr1 overlapped with a region of qMel-1. To know whether these two QTLs are functionally related, 110 F3 lines were developed from a cross between Ilpum and CR7124. CR7124 having photoblastism and long mesocotyl was selected from 120 F8 lines. 95 F3 lines were measured for germination rate in a light and dark condition and mesocotyl length. Mesocotyl length and germination rate in the dark condition in F3 lines showed significant correlation (r = 0.7, P < 0.0001). 95 $F_3$ lines were genotyped with RM7419 on chromosome 1. ANOVA showed that RM7419 was tightly linked to QTLs for photoblastism as well as mesocotyl length on chromosome 1 (P < 0.0001) indicating the tight linkage of two QTLs. Fine mapping of the two QTL is underway to analyze their functional relationship.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.116-116
• /
• 2017

Low-temperature is one of the environmental stress factors that affect plant growth and development and consequently limit crop productivity. The control of seed germination under low-temperature is organized by many genes which are called quantitative trait loci (QTLs). High germination rate for low-temperature is an important factor of growing rice. Previously, we identified a major QTL controlling low-temperature germinability in rice using 96 introgression lines (ILs) derived from a cross between Oryza rufipogon (Rufi) and the Korean japonica cultivar, 'Hwaseongbyeo (HS)'. A $BC_3F_7$ line (TR5) showed better low-temperature germinability than its recurrent parent. TR5 was crossed with HS to develop a segregating F2:3 populations for the target QTL. Six SSR markers polymorphic between HS and Rufi were used to screen and fine map the qLTG1. The qLTG1 on chromosome 1, which accounted for 55.5% of the total phenotypic variation, confirmed that Rufi allele enhanced the low-temperature germinability. Intervals between markers CRM16 and CRM15, four candidate genes were identified. The identified candidate genes, which are encoded by a protein of unknown function, showed their direct involvement on seed germination at low-temperature. To identify genes targeted by qLTG1, we investigated the expression profiles of these candidate genes and germination behavior of qLTG1 under different stress conditions and compared to HS, Rufi, and TR5 at $13{\pm}2^{\circ}C$ for 3 days after incubation. Furthermore, transgenic rice plants will also be developed to conduct a detailed investigation on low-temperature germinability. Hence, the QTL for low-temperature germinability would be useful in rice breeding programs especially in the development of lines possessing low-temperature germinability.

• Genomics & Informatics
• /
• v.6 no.1
• /
• pp.8-13
• /
• 2008

High-density lipoprotein (HDL) whose primary role is to transport cholesterol from peripheral tissues to the liver, is associated with the incidence of coronary heart disease. We analyzed HDL cholesterol levels in a genetically isolated population of extended Mongolian families. A total of 1002 individuals (54.5% women) from 95 families were enrolled. After genotyping by use of 1000 microsatellite markers, we performed a genome-wide linkage search with variance component analysis. The estimated heritability of HDL cholesterol was 0.45, revealing that HDL cholesterol was under significant genetic influence. We found peak evidence of linkage (LOD score=1.88) for HDL cholesterol level on chromosome 6 (nearest marker D6S1660) and potential evidences for linkage on chromosomes 1, 12 and 19 with the LOD scores of 1.32, 1.44 and 1.14, respectively. These results should pave the way for the discovery of the relevant genes by fine mapping and association analysis.

• Journal of Korea Multimedia Society
• /
• v.14 no.8
• /
• pp.1082-1093
• /
• 2011

Traditional rendering of cartoon character cannot revive the feeling of concept drawings properly. In this paper, we propose capture technology to get toon shading model from the concept drawings and with this technique, we provide a new novel system to render 3D cartoon character. Benefits of this system is to cartoonize the 3D character according to saliency to emphasize the form of 3D character and further support the sketch-based user interface for artists to edit shading by post-production. For this, we generate texture automatically by RGB color sorting algorithm to analyze color distribution and rates of selected region. In the cartoon rendering process, we use saliency as a measure to determine visual importance of each area of 3d mesh and we provide a novel cartoon rendering algorithm based on the saliency of 3D mesh. For the fine adjustments of shading style, we propose a user interface that allow the artists to freely add and delete shading to a 3D model. Finally, this paper shows the usefulness of the proposed system through user evaluation.

• The Plant Pathology Journal
• /
• v.29 no.3
• /
• pp.223-233
• /
• 2013

Rice stripe virus (RSV) is one of the most destructive viruses of rice, and greatly reduces rice production in China, Japan, and Korea, where mostly japonica cultivars of rice are grown. RSV is transmitted by the small brown plant-hopper (SBPH) in a persistent and circulative-propagative manner. Several methods have been developed for detection of RSV, which is composed of four single-stranded RNAs that encode seven proteins. Genome sequence data and comparative phylogenetic analysis have been used to identify the origin and diversity of RSV isolates. Several rice varieties resistant to RSV have been selected and QTL analysis and fine mapping have been intensively performed to map RSV resistance loci or genes. RSV genes have been used to generate several genetically modified transgenic rice plants with RSV resistance. Recently, genome-wide transcriptome analyses and deep sequencing have been used to identify mRNAs and small RNAs involved in RSV infection; several rice host factors that interact with RSV proteins have also been identified. In this article, we review the current statues of RSV research and propose integrated approaches for the study of interactions among RSV, rice, and the SBPH.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.479-488
• /
• 2016

PURPOSE. The aim of this study was to test the modulus of elasticity (E) across the interfaces of yttria stabilized zirconia (YTZP) / veneer multilayers using nanoindentation. MATERIALS AND METHODS. YTZP core material (KaVo-Everest, Germany) specimens were either coated with a liner (IPS e.max ZirLiner, Ivoclar-Vivadent) (Type-1) or left as-sintered (Type-2) and subsequently veneered with a pressable glass-ceramic (IPS e.max ZirPress, Ivoclar-Vivadent). A $5{\mu}m$ (nominal tip diameter) spherical indenter was used with a UMIS CSIRO 2000 (ASI, Canberra, Australia) nanoindenter system to test E across the exposed and polished interfaces of both specimen types. The multiple point load - partial unload method was used for E determination. All materials used were characterized using Scanning Electron Microscopy (SEM) and X - ray powder diffraction (XRD). E mappings of the areas tested were produced from the nanoindentation data. RESULTS. A significantly (P<.05) lower E value between Type-1 and Type-2 specimens at a distance of $40{\mu}m$ in the veneer material was associated with the liner. XRD and SEM characterization of the zirconia sample showed a fine grained bulk tetragonal phase. IPS e-max ZirPress and IPS e-max ZirLiner materials were characterized as amorphous. CONCLUSION. The liner between the YTZP core and the heat pressed veneer may act as a weak link in this dental multilayer due to its significantly (P<.05) lower E. The present study has shown nanoindentation using spherical indentation and the multiple point load - partial unload method to be reliable predictors of E and useful evaluation tools for layered dental ceramic interfaces.