• Journal of the Korean Institute of Landscape Architecture
• /
• v.19 no.1
• /
• pp.61-80
• /
• 1991

The purpose of this study is to present the design method to embody the cultural heritage and to reproduce the image of Korean Traditional Garden these days. For this purpose, to begin with, the major elements which can be applied to the planning and design were extracted by to study on the prototype of Korean Traditional Garden, and the process and the outcome for reconstruction of traditional garden were presented by design proposal for the Korean Garden in the exhibition space of EXPO '90, the International Garden and Greenary Exposition, Osaka, Japan, 1990. The study on the prototype of Korean Garden is focused on the spatial organization, the facilities allocation, and the gardening technic of traditional garden, and the major contents of the case study are as follow ; (1) To investigate the constraints and the opportunities of site development by the analysis and the synthesis of the site condition for the case study, (2) To study on the planning technic which can be applied to the site, (3) To establish the planning models which can be introduced into the site and to choose the final model by the comparison and valuation of them, (4) To set up the Master Plan on the basis of the final model. In spite of the fact that the method and the contents have a lot of problems, the significance of this study is to present a possibility to reproduce the Korean Traditional Garden these days, moreover to grope for the opportunities to propagate it internationally.

• Journal of Educational Research in Mathematics
• /
• v.25 no.3
• /
• pp.449-460
• /
• 2015

As a main body of a curriculum, a set of sentences stating mathematical contents plays an important role in teaching and learning mathematics. The contents sentences in the $7^{th}$ version, the 2007 version, and the 2009 version of elementary mathematics curricula were analysed. The elementary mathematics curriculum consists of about 200 contents sentences. The final endings of those sentences are the type of ability such as "to be able to ~". The elementary mathematics curriculum would be managed systematically by disassembling and restructuring those contents sentences. We should state students' activities more concretely by varying the final endings in the curriculum.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.3
• /
• pp.157-166
• /
• 2009

The pulverized coal combustion behavior in the coal fired utility boiler has been investigated with the CFD and process analysis techniques. The used commercial software were CFX and PROATES, and these were coupled each other to get more reliable boundary condition set-up, resulting in more reliable solution. For two cases which were the actual operation condition of A power plant, the calculated values from the coupled CFD and process analysis for thermal energy system were compared with the plant data, and the good agreements were obtained for Case 1 and 2. The calculated temperature distributions on the surface of heat exchangers were compared with the plant data for the steam temperatures across heat exchangers, and these explained the actual operating situation very well. The temperature deviation across the final superheater tube, which was believed to be the main cause of the frequent tube failure, were also explained very well with the calculated distributions of gas temperature and radiation on the plane of the final superheater.

• Design & Manufacturing
• /
• v.10 no.3
• /
• pp.20-24
• /
• 2016

Foaming is a step of forming by the ratio of the internal combustion chamber in a state where the in flow of the material is suppressed, if the diameter is small and a high to a crack generated on the molding is not possible. The present study, we studied using as part experiments for forming the circular shape of the forming height of 10 mm without the occurrence of cracks, results preformed primary, the need to set the height of the forming than the height of the product, preformed secondary. It was able to increase the height of the molded product with less than the height of the next step to be carried out compression processing to create a small comer of the desired shape. In addition, it was found that on a great influence on the quality of the final quality on the final molding of the primary preformed, secondary.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.27 no.4
• /
• pp.41-65
• /
• 2002

We study a multi-component production/inventory system in which individual components are made to meet various demand types. We assume that the demands arrive according to a Poisson process, but there is a fixed probability that a demand requests a particular kit of different components. Each component is produced by a flow line with several stations in which the processing times of each station follow a two-stage Coxian distribution. The production of each component is operated by an independent base-stock policy with blocking. We assume that the time needed to assemble final products follows a general distribution and the capacity of an assembling facility is sufficiently large. The objective of this study is to obtain key performance measures such as the distribution of the number of each orders for each final product and the mean time of fulfilling a customer order. The basic principle of the proposed approximation method is to decompose the original system into a set of subsystems, each subsystem being associated with a flow line. Each subsystem is analyzed in isolation using a Marie's method. An iterative procedure is then used to determine the unknown parameters of each subsystem. Numerical results show that the accuracy of the approximation method is acceptable.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.1
• /
• pp.15-22
• /
• 2008

The effects of fillers on the mechanical and thermal properties of glass/novolac composites have been studied. The matrix polymer and reinforcement were novolac type phenolic resin and milled glass fiber, respectively. Three different fillers, such as calcium carbonate, aluminum oxide, and wood powder were used for glass fiber reinforced plastic(GFRP) manufacture. Gravity, moisture content, tensile and flexural strength were measured to analyze the mechanical properties of GFRP and the final composites was burned in the electronic furnace at $1000^{\circ}C$ to confirm thermal properties GFRP containing aluminium oxide shows the highest thermal stability with 32% of weight loss at $1000^{\circ}C$ for one hour. GFRP containing calcium carbonate shows the maximum flexural strength (146 MPa), but that containing wood powder dose the highest tensile strength (65 MPa). Conclusively, we found that the characteristics of final composites strongly depend on several factors, such as types of materials, contents and chemical affinity of fillers. Therefore, it is very important to set up the combination of fillers for GFRP manufacturing to improve both mechanical and thermal properties at the same time.

• International Journal of High-Rise Buildings
• /
• v.7 no.2
• /
• pp.111-125
• /
• 2018

By the year 2050, the world population is set to increase to 9 billion people, of which 66% will be living in cities. It is argued that this will inevitably lead to further urban densification and soaring, inhumane and dense vertical environments. However, innovative and disruptive technologies impacting all realms of life means that we will also live, work, play, learn and make in novel ways, the beginnings of which are already becoming evident. These present opportunities for reimagining city environments, and in particular tall buildings, with a focus on reducing redundancies and re-appropriating existing buildings, creating novel hybrid environments, incorporating green and social democratic spaces, and integrating multiple modes of transport. This paper examines how vertical cities may perhaps be dense, resource efficient, and yet humane, presenting three possible scenarios for Singapore's context, which are, however, common to many Asian high-density urban environments. The scenarios presented are the outcome of Final-Year Thesis Projects undertaken by final-year architecture students at the National University of Singapore (NUS) in 2017.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.68-78
• /
• 2014

Recently, companies are trying to gain a competitive advantage in the market to meet the voice of customer. For this purpose, QFD has been used as product development technology in many areas to include the customer' requirements. Also, Kano model has been used to understand the customer' requirements for an effective way. Therefore integration of Kano model and QFD can more efficiently reflect the customer' requirements when designing a new service. This paper proposes PI index by taking into account the current satisfaction position of our company and competitors while IR (Improvement Ratio) value was set uniformity. This study suggests a more accurate index to predict potential improvements and calculates the final importance or priority. Through case studies targeted at elevator maintenance companies, we can have a general idea how much to improve in the near future and estimate the final importance of customer requirements.

• Journal of Korea Game Society
• /
• v.18 no.6
• /
• pp.83-94
• /
• 2018

This study is to find out how to improve the efficiency of game development by analyzing the effects of the characteristics of game development organization on game development performance. The characteristics of the game development organization were set as independent variables, consisting of game project management characteristics, PM characteristics, game development team characteristics, and organizational culture. Game performance is divided into game project performance and game development final performance. As a result, the characteristics of the four game development organizations were found to be a significant factors in the game project performance and game development final performance. This study suggests that the environment that can focus on game development and appropriate management education for managers are needed to enhance the competence of members in game development team.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.43-52
• /
• 2010

In the following studies, a detailed research of commercialization of native foods around Boseong area had taken place. The objective for the studies is to increase the value of traditional cooking by creating a unique course-meal. Statistical methods of demographic characteristics, frequency analysis on farmhouse restaurants, dish frequency analysis were used. The studies were carried out with total of 27 experts, and carried out between June and Angust 2009. Surveys were used, and all 27 survey results were used in the final analysis. With the results, the team has come up with unique Boseong course meal for every season.