Browse > Article

A Study on the cracks ways minimizing at circular forming  

Son, Jong-Min (Department of Mold & Die Engineering, Kongju National University)
Kim, Sei-Whan (Department of Mold & Die Engineering, Kongju National University)
Lee, Chun-Kyu (Department of Metal Die Design Engineering, yuhan College)
Publication Information
Design & Manufacturing / v.10, no.3, 2016 , pp. 20-24 More about this Journal
Abstract
Foaming is a step of forming by the ratio of the internal combustion chamber in a state where the in flow of the material is suppressed, if the diameter is small and a high to a crack generated on the molding is not possible. The present study, we studied using as part experiments for forming the circular shape of the forming height of 10 mm without the occurrence of cracks, results preformed primary, the need to set the height of the forming than the height of the product, preformed secondary. It was able to increase the height of the molded product with less than the height of the next step to be carried out compression processing to create a small comer of the desired shape. In addition, it was found that on a great influence on the quality of the final quality on the final molding of the primary preformed, secondary.
Keywords
Forming; Bracket; Embosing;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Kim Sei-Hwan, "Defective and Countermeasure of the press die", pp. 143-228, Daekwang seorim, 2013.
2 이춘규, 남승돈, "드로잉가공에서 다이패드의 독립형과 일체형 구조가 제품 두께에 미치는 영향에 관한 연구", 대한 안전 경영 과학회, Vol. 17 No2, pp. 235-240, 2015.   DOI
3 김세환, "리스트라이킹 금형용 펀치와 다이플레이트의 구조 설계에 관한 연구", 한국산학기술학회, pp. 708-712, 2007.
4 김세환, "각통 드로잉용 펀치와 다이 구멍의 각 반지름 설계에 관한 연구" 한국금형공학회, pp. 16-23, 2008.
5 이종배, 류제구, "돔형 드로잉 제품의 변형 거동에 관한 연구", 한국금형공학회, 제2권 제3호, pp. 32-39, 2008.
6 Lee Chun-Kyu, "A Study on Meterial thickness variation of the circle Forming shape for installing PCB.