• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.134-142
• /
• 2010

A comparative study on the trade-off between the drive current and the total gate capacitance in double-gate (DG) and triple-gate (TG) FinFETs is performed by using 3-D device simulation. As the first result, we found that the optimum ratio of the hardmask oxide thickness ($T_{mask}$) to the sidewall oxide thickness ($T_{ox}$) is $T_{mask}/T_{ox}$=10/2 nm for the minimum logic delay ($\tau$) while $T_{mask}/T_{ox}$=5/1~2 nm for the maximum intrinsic gate capacitance coupling ratio (ICR) with the fixed channel length ($L_G$) and the fin width ($W_{fin}$) under the short channel effect criterion. It means that the TG FinFET is not under the optimal condition in terms of the circuit performance. Second, under optimized $T_{mask}/T_{ox}$, the propagation delay ($\tau$) decreases with the increasing fin height $H_{fin}$. It means that the FinFET-based logic circuit operation goes into the drive current-dominant regime rather than the input gate load capacitance-dominant regime as $H_{fin}$ increases. In the end, the sensitivity of $\Delta\tau/{\Delta}H_{fin}$ or ${{\Delta}I_{ON}}'/{\Delta}H_{fin}$ decreases as $L_G/W_{fin}$ is scaled-down. However, $W_{fin}$ should be carefully designed especially in circuits that are strongly influenced by the self-capacitance or a physical layout because the scaling of $W_{fin}$ is followed by the increase of the self-capacitance portion in the total load capacitance.

• 대한기계학회논문집B
• /
• 제36권4호
• /
• pp.385-390
• /
• 2012

본 연구는 LED 조명기구에 적합한 원형 히트싱크의 최적설계를 수행하였다. DTRM 복사 모델을 이용하여 자연대류와 복사 열전달을 수치적으로 해석하였고, 수치모델을 실험을 통하여 검증하였다. 휜 개수, 긴 휜 길이, 중간 휜 길이가 전체 열저항 및 복사 열전달에 미치는 영향을 조사하였고, 그 결과 방사율이 증가할수록 복사 열전달의 크기는 증가하여 열저항은 감소하지만, 인자 변화에 따른 전체 열저항의 경향성은 거의 일정하였다. 원형 히크싱크의 최적화를 수행하였고, 최적화된 긴 휜의 개수는 19~28 개, 긴 휜의 길이는 히트 싱크의 반지름의 1/2 이고, 휜의 길이 비는 0.4~0.7 사이의 값을 얻었다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제4권2호
• /
• pp.153-163
• /
• 2000

The non-dimensional convective heat losses from each surface are investigated as a function of the non-dimensional fin length, width and the ratio of upper surface Biot number to bottom surface Biot number (Bi2/Bi1) using the three-dimensional separation of variables method. Heat loss ratio in view of each surface with the variation of Bi2/Bi1 is presented. The variation of the non-dimensioal temperare profile along the fin center line for a thermally asymmetric conditions is also presented.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.160-164
• /
• 2010

The radio frequency (RF) model of SOI FinFETs with gate length of 40 nm is verified by using a 3-dimensional (3-D) device simulator. This paper shows the equivalent circuit model which can be used in the circuit analysis simulator. The RMS modeling error of Y-parameter was calculated to be only 0.3 %.

• 한국정밀공학회지
• /
• 제32권2호
• /
• pp.219-227
• /
• 2015

A dehumidifier using a thermoelement has many advantages compare to a dehumidifier using compressor systems. However, it is crucial to optimize the performance of heat sink for improving heat dissipation problem on the heat generation part. In this study, we utilized computational fluid dynamics software to compare Nusselt number, temperature and system efficiency based on fin thickness, flow gap between fin and fin length. Moreover, slip flow on the boundary layer was applied for the further analysis. Our objective in this study is to suggest an optimal fin shape to improve heat transfer with the tendency of performance factor depending on change of the shapes. Our results on the optimization of fin shape and analysis of slip flow will be utilized to enhance the heat transfer in the heat sink which is important in the design of dehumidifier using a thermoelement.

• 한국발생생물학회지:발생과생식
• /
• 제21권3호
• /
• pp.287-295
• /
• 2017

This study was conducted to observe egg and larvae morphological development of carp to obtain basic data for resource conservation and taxonomic research. Brood carp used in the research (total length 67.3-75.5 cm, average $71.0{\pm}3.45cm$) were bred in a circular rearing aquarium ($600{\times}300{\times}100cm$) using a running water system from January to July, 2015. Breeding water temperature was maintained at $23.0-25.0^{\circ}C$(average $24.0^{\circ}C$). Fertilized carp eggs were translucent and globular, and their size was 1.75-1.89 mm (average $1.82{\pm}0.06mm$). Blastoderms formed 10 min after fertilization and reached the two-cell stage 30 min after fertilization. Then, the embryo turned dark and exhibited melanophores, and blood started flowing from the heart across the egg yolk at 42 hrs and 50 min after fertilization. Hatching began 70 hrs and 26 min after fertilization larvae emerged through the egg membrane, starting from the head. The length of prelarvae immediately after hatching was 5.23-5.38 mm (average $5.31{\pm}0.11mm$) the mouth and anus were closed, and the pectoral fin was formed. Postlarvae at 18 days after hatching had a total length of 11.9-13.9 mm (average $12.9{\pm}1.40mm$), separate anal fin and back membranes, and fin ray. Juveniles fish at 35 days after hatching had a total length of 29.9-30.2 mm (average $30.1{\pm}0.13mm$), with the body covered with scales, and the same number of fin rays, color, and shape as their broodstork.

• 한국어류학회지
• /
• 제35권4호
• /
• pp.378-383
• /
• 2023

우리나라 전 해안을 대상으로 미끈망둑 (Luciogobius guttatus)에 대한 분류학적 재검토를 실시하였다. 그 결과 41개체 (31.3~54.4 mm SL)가 L. martellii로 분류되었다. 본 종의 형태학적 특징은 다음과 같다: 복추골 수 16개; 총 척추골 수 35~37개; 등지느러미 기저부의 길이가 미병부 상부의 길이보다 길거나 같음; 가슴지느러미 상부에 1개의 유리연조; 꼬리지느러미 끝이 하얀색인 특징이 있다. 그중에서 L. guttatus와 형태학적으로 가장 뚜렷한 차이점인 등지느러미 기저부 길이와 미병부 상부의 길이의 차이는 L. martellii의 총모식표본과도 잘 일치하였다. 본 종의 한국명으로 "검정미끈망둑"을 제안한다.

• Animal Systematics, Evolution and Diversity
• /
• 제28권4호
• /
• pp.308-311
• /
• 2012

A single specimen (134.3 mm standard length) of a snailfish, Careproctus notosaikaiensis was collected from a fish trap in Goseong-gun, Gangwon-do, East Sea, Korea. It is characterized by having the teeth strongly trilobed; dorsal fin rays 52; anal fin rays 47; pectoral fin rays 35; caudal fin rays 10; vertebrae 58; ribs 2 pairs; cephalic pores, 2-6-7-2; gill slit extending to the fifth pectoral fin ray; chin pores paired and equal in size; dorsal and anal fins with distinct reddish margins. We describe this species as the first record to Korea, and proposed the new Korean name, "Dong-hae-bun-hong-ggom-chi" for this species.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.302-310
• /
• 2008

This paper puts forward an advanced consideration on the design of scaled multiple-gate FET (MuGFET); the aspect ratio ($R_{h/w}$) of the fin height (h) to fin width (w) of MuGFET is considered with the aid of 3-D device simulations. Since any change in the aspect ratio must consider the trade-off between drivability and short-channel effects, it is shown that optimization of the aspect ratio is essential in designing MuGFET's. It is clearly seen that the triple-gate (TG) FET is superior to the conventional FinFET from the viewpoints of drivability and short-channel effects as was to be expected. It can be concluded that the guideline of w < L/3, where L is the channel length, is essential to suppress the short-channel effects of TG-FET.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.537-546
• /
• 2000

The heat transfer characteristics of refrigerant-oil mixture for horizontal in-tube evaporator have been investigated experimentally. A smooth copper tube and a micro-fin tube with nominal 9.5 mm outer diameter and 1500 mm length were tested. For the pure refrigerant flow, the dependence of the axial heat transfer coefficient on quality was weak in the smooth tube, but in the micro-fin tube, the coefficients were 3 to 10 times greater as quality increases. Oil addition to pure refrigerant in the smooth tube altered the flow pattern dramatically at low mass fluxes, with a resultant enhancement of the wetting area by vigorous foaming. The heat transfer coefficients of the mixture for low and medium qualities were increased at low mass fluxes. In the micro-fin tube, however, the addition of oil deteriorates the local heat transfer performance for most of the quality range, except for low quality. The micro-fin tube consequently loses its advantage of high heat transfer performance for an oil fraction of 5%. Results are presented as plots of local heat transfer coefficient versus quality.