Browse > Article
http://dx.doi.org/10.7736/KSPE.2015.32.2.219

Optimal Design of a Plate-Fin Heat Sink with Slip Flow  

Park, Boo Seong (School of Mechanical Engineering, University of Ulsan)
Park, Hyun Jin (School of Mechanical Engineering, University of Ulsan)
Kim, Bo Hung (School of Mechanical Engineering, University of Ulsan)
Publication Information
Abstract
A dehumidifier using a thermoelement has many advantages compare to a dehumidifier using compressor systems. However, it is crucial to optimize the performance of heat sink for improving heat dissipation problem on the heat generation part. In this study, we utilized computational fluid dynamics software to compare Nusselt number, temperature and system efficiency based on fin thickness, flow gap between fin and fin length. Moreover, slip flow on the boundary layer was applied for the further analysis. Our objective in this study is to suggest an optimal fin shape to improve heat transfer with the tendency of performance factor depending on change of the shapes. Our results on the optimization of fin shape and analysis of slip flow will be utilized to enhance the heat transfer in the heat sink which is important in the design of dehumidifier using a thermoelement.
Keywords
Heat sink; Plate-Fin; Slip flow; Thermoelement; Convection;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Hwang, J. and Kang, B. H., "An Experimental Study on the Optimal Operation Condition of an Air -Cooler using Thermoelectric Modules," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 18, No. 1, pp. 66-72, 2006.   과학기술학회마을
2 Kang, S. W., Shin, J. H., Han, H. S., and Kim, S. Y., "A Study on Performance of Thermoelectric Air-Cooling System in Parallel Flow," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 23, No. 6, pp. 421-429, 2011.   과학기술학회마을   DOI
3 Kang, B. H., Chang, H. J., Kim, S, Y., and Kim, S. H., "Cooling Characteristics at Hot Side of the Thermoelectric Module for an Air Conditioner," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 14, No. 3, pp. 214-221, 2002.   과학기술학회마을
4 Lee, D. R., "Investigation of the Optimal Cooling Performance using Peltier Module and Heat Sink," Journal of the Korea Society for Power System Engineering, Vol. 10, No. 4, pp. 65-70, 2006.   과학기술학회마을
5 Yoon, H. S. and Oh, Y. K., "A Study on Cooling Characteristic of Thermoelectric Cooling Device using Thermoelectric Phenomenon," KSAE Annual Meeting, No. 4, pp. 483-487, 2009.   과학기술학회마을
6 Kim, K. J., "Thermal Behavior of a Hybrid Fin Heat Sink," KSME Spring Annual Meeting, No. 11, pp. 2776-2779, 2012.
7 Jang, H. S., Lee, J. S., and Park, D. G., "Heat Analysis for Heat Sink Design using Finite Element Method," Journal of the Korea Academia-Industrial cooperation Society, Vol. 14, No. 3, pp. 1027-1032, 2013.   과학기술학회마을   DOI
8 Jang, M. S., Kim, J. W., and Jung, B. Y., "The Performance Study on Cooling Fin Shape of Car Auto-Transmission Oil Cooler," KSAE Annual Meeting, Vol. 2, pp. 991-998, 2008.
9 Kang, H. S. and Song, N. J., "Analysis of Temperature Distribution and Heat Loss for an Asymmetric Trapezoidal Fin," Trans. Korean Soc. Mech. Eng. B, Vol. 36, No. 4, pp. 377-383, 2012.   과학기술학회마을   DOI
10 Kwon, G. H., Kim, T. H., and Kim, S. J., "Effects of Slot on the Cooling Performance of a Plate-fin Heat Sink with an Impinging Flow," KSME Spring Annual Meeting, No. 5, pp. 233-234, 2010.
11 Lee, S. H., Han, C. H., Chon, M. S., Jeong, S. J., and Park, S. H., "The Fin Configuration Optimization of Peltier Cooling System for Heat Transfer Characteristics," KSAE Annual Meeting, No. 10, pp. 37-42, 2012.
12 Kim, H. R., Park, K. W., and Choi, D. H., "Numerical Shape Optimization for Plate - Fin Type Heat Sink," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 16, No. 3, pp. 293-303, 2004.   과학기술학회마을
13 Kim, S. Y. and Webb, R. L., "Analysis of Convective Thermal Resistance in Ducted Fan-Heat Sinks," IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 3, pp. 439-448, 2006.   DOI
14 Teertstra, P., Yovanovich, M. M., and Culham, J. R., "Analytical Forced Convection Modeling of Plate Fin Heat Sinks," Proc. of 15th Annual IEEE, Semiconductor Thermal Measurement and Management Symposium, Vol. 10, No. 4, pp. 34-41, 1999.
15 Yu, X., Feng, J., Feng, Q., and Wang, Q., "Development of a Plate-Pin Fin Heat Sink and its Performance Comparisons with a Plate Fin Heat Sink," Applied thermal engineering, Vol. 25, No. 2-3, pp. 173-182, 2005.   DOI
16 Megahed, A. M., "Variable Viscosity and Slip Velocity Effects on the Flow and Heat Transfer of a Power-law Fluid over a Non-Linearly Stretching Surface with Heat Flux and Thermal Radiation," Rheologica Acta: an international journal of rheology, Vol. 51, No. 9, pp. 841-847, 2012.   DOI
17 Chen, C. H., "Slip-flow Heat Transfer in a Microchannel with Viscous Dissipation," Heat and mass transfer, Vol. 42, No. 9, pp. 853-860, 2006.   DOI
18 MILLS, A. F., "Heat Transfer 2nd," Prentice Hall Inc., pp. 86-92, 1999.