• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1184-1189
• /
• 1990

In order to investigate liquid fuel filming over the intake manifold wall, an electrode-type probe has been developed by lines of authors and this probe was employed in a single cylinder two and four-stroke cycle engine and in a four cylinder four-stroke engine operated by neat methanol fuel. The performance of the probe was dependent upon several parameters including the liquid fuel layer thickness, temperature, additive in the fuel, and electric power source (i.e., AC and voltage level) and was independent of other variables such as direction of liquid flow with respect to the probe arrangement. Several new findings from this study may be in order. The flow velocity of the fuel layer in the intake manifold of engine was about (if the air velocity in the steady state operation, the layer thickness of liquid fuel varied in both the circumferential and longitydinal directions. In the transient operation of the engine, the temporal variation of fuel thickness was determined, which clearly suggests that there was difference between fuel/air ratio in the intake manifold and that in the cylinder. The variation was greatly affected by the engine speed, fuel/air ratio and throttle opening. And the variation was also very significant from cylinder to cylinder and it was particularly strong different engine speeds and throttle opening.

• Applied Microscopy
• /
• v.45 no.2
• /
• pp.74-79
• /
• 2015

This study investigated the tongue movement during prey capture by Rana nigromaculata and the location of the frenulum linguae, which effects tongue movement. The tongue of R. nigromaculata are elliptical at the anterior and concave U-shaped at the posterior. The location of the frenulum linguae of R. nigromaculata is located at the front of the submentalis. This is due to the location of the frenulum linguae, which has significantly effects the movement and the expandability of the tongue. In terms of mobility, the tongue of R. nigromaculata and the expandability of the frenulum linguae allow the tongue to increase in length two or more times compared to immobile tongue in the other species. The time required until the swallowing movement after looking at and capturing the prey was 0.692000 seconds. Filming prey capture with a high speed camera showed that the rear part of the U-shaped tongue captures the prey with an appearance of stretching out longer to the front of tongue and turning in a reverse direction to bring the prey to the mouth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.932-934
• /
• 2003

In this paper, time, studied about method that can analyze iris change to using differential image of iris image that put interval and films and utilize as patient's health examination according to iris change. Time, Differential mage of iris image that put interval and films ran be used usefully to search early diagnosis of disease and unfolding process etc.. of disease by showing definitely change by tine. In the case of iris diagnostic system, iris outside area extracts iris area and uses Differential image of before filming image and image that film present to use canny edge detector as there is cay to extract iris area as do not help in diagnostic and change analyzed comparison.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.1 s.18
• /
• pp.11-17
• /
• 2003

The purpose of this study is to examine farmers' intentions, attitudes, and the type of filming they are involved in, including to provide supporting data for planning the agricultural strategy and Green Belt policy in Seoul. All the collected data was analyzed using the contingency tables and the Chi-square test using the SAS computer statistical package. The leaseholders did not want to change the current Green Belt policy for the study area, while the landowning farmers hoped for either its revision or dissolution. Both groups pointed out that the Green Belt policy resulted in the delay of development and complained about the difficulty of changing the land use type. The older generation supported the dissolution of the Green Belt, policy, as compared with the younger generation who wanted to maintain or modify the policy. The leaseholders worried that the possible changes in the Green Belt policy might affect the current agricultural land contract system, whereas the landowning farmers were very interested in easing restrictions on changing land use. The compensation plan, which is indemnified land owners for their loss of restrictions on land use, might be useful to sustain urban farming in the Green Belt.

• Journal of Korean Society for Geospatial Information Science
• /
• v.2 no.1 s.3
• /
• pp.81-91
• /
• 1994

A living environment of filming and fishing village is on the serious conditions because of the situation of rural exodus, import of farm products from advanced nations and various other factors. This study devised an improvement project of a group village and computerized related data connected with one in order to promote poor living conditions of farmers and fishermen to the urban level. In this study, we show that we can give necessary information when we build up integration system as well as we can expect quickness and correctness of a work management with computer for related data about an production project of a group village at farming and fishing village. In addition it is show that is possible to guide management data when we undertake revision and repair of facilities rapidly and can support an intensive decision among alternative plans.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.51-70
• /
• 2003

In recent years, Korean rice must compete with the rice of advanced countries under Doha Development Agenda(DDA) and free Trade Agreement(FTA). Therefore we should find more active and positive solution in rice industry according to the inncreasing power of international pressure. Increasing rice production was the most important policy during the past food-deficient days, but recently, with overproduction of rice, various circulation system by the brand(price)-differentiation should be settled in a recent market of Korea. Nowadays, some advanced rice farmers and Rice Processing Complex(RPC) managers developed new brands of rice with high-quality, adding healthy materials and environment-friendly farming methods. Therefore, the future strategy of making a new brand rice should be planned including selection of rice variety, cultural and post-harvest techniques, circulation and processing methods to compete against foreign rice. And environment-friendly farming is also recommendable for food safety and differentiate from imported rice. For the purpose of successful brand-rice, the following points might be considered. Firstly, selection of good quality rice and continual development of good variety must be conducted for the differentiation of Korean rice from foreign rice. Secondly, a special contract between producer and consumer with functional-rice, organic filming-rice, specific-rice will be recommendable. Thirdly, improvement of post-harvest management and milling system are necessary for the production of differentiated-rice. Fortunately, standard of inspection, rules of description for brand-rice must be developed by a more scientific examination in order to settlement of trust for consumer. Finally, provincial or regional-representative brand rice must be settled and conducted for the development of agreement market system between producer and consumer.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.539-547
• /
• 2012

To manufacture laminated wood with improved mechanical properties by providing uniform adhesiveness, the adhesive was applied and the plate adhesive was laminated on the wood surface. Then, after laminating the wood on the top part of the adhesivebond, it was heated and dried while the adhesive was stiffened using microwaves, and the test piece was manufactured by compressing it with the press machine for thirty minutes. The temperature and the water content were examined according to the heating time of the wood heated with the microwave, and testing was conducted on the shear strength and flexural strength of the wood. In addition, the microstructure of the adhesive bond between the wood was recorded to confirm the penetrabilityinto the wood structure for the adhesive. After the test was conducted, it was found that the test piece manufactured with wood that has its water content leveled with the microwave heating showed improved shear strength and bending strength compared to the standard test piece. With regard to adhesives, liquefied polyvinyl acetate resin and plate's PVB resin were found to have superior adhesive strength. Also, after filming the cellular microstructure, it was found that when the laminated wood is heated with microwaves, the infiltration of the adhesive into the inside of the wood becomes easy, which makes it effective for improving adhesiveness.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.219-226
• /
• 2017

As the UAV industry is getting matured, various types of UAVs have appeared in many application fields, including filming, reconnaissance, rescue, and etc. and it requires the quick hardware designs, particularly a battery pack, of the UAV. We developed the automatic battery pack design tool for the convenient battery pack configuration design of the hoverable type delivery UAV. With inputs, including current profile, voltage profile, various kinds of cell specifications, desired battery pack voltage, and etc. the automatic battery pack design tool calculates a pack having the minimum weight and the maximum capacity by combining either homogeneous cells or heterogeneous cells. Also, the tool could predict the capacity fading trend of the designed battery pack configuration.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.2
• /
• pp.8-18
• /
• 2015

This paper proposes a dimming method and a hybrid LED driving circuit suitable for the ultra high definition (UHD) broadcasting. There are major two problems during the dimming control for traditional LED broadcast lightings; one is a flicker that occurred when camera filming to these lightings, and the other is that linear control is impossible for LED luminous intensity under 10% due to LED electrical characteristics. The proposed dimming method and the driving circuit are designed to solve two problems simultaneously. For high level dimming control region from 10 to 100%, the analog control method was applied to the switching regulator constructed by MOSFET operated in the saturation region. For low level dimming control region under 10%, the fast PWM control method with the linear regulator constructed by MOSFET in the ohmic region was used. We verified experimentally that the dimming method is able to control the luminous intensity linearly from 1 to 100% and the flicker disappears on images taken by the charge coupled device (CCD) and the complementary metal oxide semiconductor (CMOS) cameras. Therefore, the proposed method is suitable for the UHD broadcasting.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.191-193
• /
• 2017

Stop-motion animation, which is based on the physical object and is shot frame by frame, is an traditional art of animation. As an independent art form, it has formed a unique art language through a century-long development. With the continuous exploration by animators, stop-motion animation has actively combined with digital technology, and has made a great progress in the use of materials and the technique of filming. the introduction of digital technology not only enriched it's artistic expression, but also laid the basis for it's sustainable development in the new era. This study investigates how 3D printer technology affects the production process and industry of stop motion animation.