• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.131-139
• /
• 2018

The king oyster mushroom (Pleurotus eryngii) is widely consumed because of its flavor, texture, and its functional properties such as antioxidant activity and prebiotic effects. However, long-term product storage and transportation (e.g., export) are difficult because of its limited durability. The shelf-life of king oyster mushroom is affected by environmental factors such as temperature, humidity, gas composition, and ventilation, which may affect sensory characteristics including respiration rate, texture, moisture, flavor, color, and pH. The major problems regarding storage of mushrooms are browning, flavor changes, and softening. To address these problems, novel preservation techniques were developed, and more durable variants were bred. Different drying methods, gamma irradiation, chitosan coating, modified atmosphere (MA) packaging, and controlled atmosphere (CA) storage were evaluated in order to extend the shelf-life of king oyster mushrooms. Freeze drying showed better results for the preservation of mushrooms than other drying methods. Irradiation with 1 kGy was more effective for extending mushroom shelf-life than higher doses. The preservative performance of chitosan-based films was improved by combining the compound with other hydrocolloids, such as oil, protocatechuic acid, and wax. The CA storage conditions recommended for king oyster mushrooms are 5kPa $O_2$ and 10 to 15kPa $CO_2$ at temperatures below $10^{\circ}C$. Active MA packaging with microperforated PP film was also effective for maintaining quality during storage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.2
• /
• pp.1-10
• /
• 2013

This paper aims to make an aesthetic inquiry into representing modes of wilderness in western films. The western film was the first genre in earnest about natural landscape, covering vast areas of America from the East to the West. It adopted representative modes suited to physical characteristics of landscapes which produced aesthetic characteristics. In western films, wilderness was represented at a distance from the camera lens as a setting and an object of contemplation. In eastern forest landscapes, western films adopted the visual model of Hudson River School's landscape painting which expressed the transcendental sublime. The western semiarid region reproduced the warrior's gaze shot from a high angle, and, in this visual mode, wilderness was expressed as a demonic landscape derived from Burke's definition of the sublime. On one hand, the western desert was represented as a place of hardship shot at a low angle which expressed the vastness, unevenness and limitlessness of the desert owing to the absence of horizon. On the other hand, the mesas of Monument Valley have sublime characteristics of size and time. In western films, they play the role of an emblem by rising from the limitless desert on the horizon. The prospect-refuge relationship, the desire to see without being seen, is discovered in the representative mode of wilderness in western films. In this context, this study hopes to discover the archetype of landscape representation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.173-173
• /
• 2010

$Bi_4Ti_3O_{12}$ ($B_4T_3$) is a unique ferroelectric material that has a relatively high dielectric constant, high Curie temperature, high breakdown strength, and large spontaneous polarization. As a result this material has been widely studied for many applications, including nonvolatile ferroelectric random memories, microelectronic mechanical systems, and nonlinear-optical devices. Several reports have appeared on the use of Mn dopants to improve the electrical properties of $B_4T_3$ thin films. Mn ions have frequently been used for this purpose in thin films and multilayer capacitors in situations where intrinsic oxygen vacancies are the major defects. However, no systematic study of the optical properties of $B_4T_3$ films has appeared to date. Here, we report optical data for these films, determined by spectroscopic ellipsometry (SE). We also report the effects of thermal annealing and Mn doping on the optical properties. The SE data were analyzed using a multilayer model that is consistent with the original sample structure, specifically surface roughness/$B_4T_3$ film/Pt/Ti/$SiO_2$/c-Si). The data are well described by the Tauc-Lorentz dispersion function, which can therefore be used to model the optical properties of these materials. Parameters for reconstructing the dielectric functions of these films are also reported. The SE data show that thermal annealing crystallizes $B_4T_3$ films, as confirmed by the appearance of $B_4T_3$ peaks in X-ray diffraction patterns. The bandgap of $B_4T_3$ red-shifts with increasing Mn concentration. We interpret this as evidence of the existence deep levels generated by the Mn transition-metal d states. These results will be useful in a number of contexts, including more detailed studies of the optical properties of these materials for engineering high-speed devices.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.837-842
• /
• 1998

As the size of the integrated circuit is scaled down the importance of Si cleaning has been emphasized. One of the major concerns is abut the removal of metallic impurities such as Cu and Fe on Si surface. In this study, we intentionally contaminated Cu and Fe on the Si wafers and cleaned the wafer by cleaning splits of the chemical mixture of $\textrm{H}_2\textrm{O}_2$ and HF and the combination of HF treatment with UV/$\textrm{O}_3$ treatment. The contamination level was monitored by TXRF. Surface microroughness of the Si wafers was measured by AFM. The Si wafer surface was examined by SEM. AES analysis was carried out to analyze the chemical composition of Cu impurities. The amount of Cu impurities after intentional contamination was abut the level of $\textrm{10}^{14}$ atoms/$\textrm{cm}^2$. The amount of Cu was decreased down to the level of $\textrm{10}^{10}$ atoms/$\textrm{cm}^2$ by cleaning splits. The repeated treatment exhibited better Cu removal efficiency. The surface roughness caused by contamination and removal of Cu was improved by repeated treatment of the cleaning splits. Cu were adsorbed on Si surface not in a thin film type but in a particle type and its diameter was abut 100-400${\AA}$ and its height was 30-100${\AA}$. Cu was contaminated on Si surface by chemical adsorption. In the case of Fe the contamination level was $\textrm{10}^{13}$ atoms/$\textrm{cm}^2$ and showed similar results of above Cu cleaning. Fe was contaminated on Si surface by physical adsorption and as a particle type.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.171-178
• /
• 2014

From now on, in order to meet more stringer diesel emission standard, diesel vehicle should be equipped with emission after-treatment devices as NOx reduction catalyst and particulate filters. Urea-SCR is being developed as the most efficient method of reducing NOx emissions in the after-treatment devices of diesel engines, and recent studies have begun to mount the urea-SCR device for diesel passenger cars and light duty vehicles. That is because their operational characteristics are quite different from heavy duty vehicles, urea solution injection should be changed with other conditions. Therefore, the number and diameter of the nozzle, injection directions, mounting positions in front of the catalytic converter are important design factors. In this study, major design parameters concerning urea solution injection in front of SCR are optimized by using a CFD analysis and Taguchi method. The computational prediction of internal flow and spray characteristics in front of SCR was carried out by using STAR-CCM+7.06 code that used to evaluate $NH_3$ uniformity index($NH_3$ UI). The design parameters are optimized by using the $L_{16}$ orthogonal array and small-the-better characteristics of the Taguchi method. As a result, the optimal values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance(ANOVA). The compared maximize $NH_3$ UI and activation time($NH_3$ UI 0.82) are numerically confirmed that the optimal model provides better conversion efficiency of $NH_3$. In addition, we propose a method to minimize wall-wetting around the urea injector in order to prevent injector blocks caused by solid urea loading. Consequently, the thickness reduction of fluid film in front of mixer is numerically confirmed through the mounting mixer and correcting injection direction by using the trial and error method.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.23-28
• /
• 2017

Pyrolysis characteristics of waste plastic films were investigated by using a thermogravimetric analysis and pyrolyzer-gas chromatography/mass spectrometry. Thermogravimetric analysis results revealed that the pyrolysis of waste plastic films can be divided into two distinct reactions; (1) the decomposition reaction of starch at between 200 and $370^{\circ}C$ and (2) that of other plastic polymers such as PS, PP, PE at between 370 and $510^{\circ}C$. The kinetic analysis results obtained by using the revised Ozawa method indicated that the apparent activation energy of the pyrolysis reaction of waste plastic films was also changed dramatically according to the different decomposition reactions of two major waste plastic film components. Py-GC/MS results also revealed that the typical pyrolyzates of each polymer in waste plastic films were levoglucosan (starch), terephthalic acid (PET), styrene monomer, dimer, and trimer (PS), methylated alkenes (PP), and triplet peaks (PE) composed of alkadiene/alkene/alkane. The phthalate, used as a polymer additive, was also detected on the pyrogram of waste plastic films mixture.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.1
• /
• pp.89-94
• /
• 2018

In this study, water-dispersed biocellulose nanofibers (TC) were prepared via an oxidation reaction using 2,2,6,6-tetramethyl-1-piperidine-N-oxy radical (TEMPO) as a catalyst. The TC retained their unique structure in water as well as in emulsion. TC adhered to the skin surface while maintaining nanofibrous structures, providing inherent functions of biocellulose, such as high tensile strength and high water-holding capacity. When gelatin gels as model skin were coated with TC, the hardness representing the elasticity was increased by 20% compared to untreated gelatin gel because TC could tightly hold the gelatin structure. When porcine skin was treated with TC and TC-contained O/W emulsion, the initial water contact angles of TC were lower than other materials, and dramatically decreased over time as water penetrated the fibrous structure of the TC film. Characterization of TC on the skin surface offered insight into the function of nanofibers on the skin, which is important for their applications with respect to fiber-cosmetics.

• Korean journal of applied entomology
• /
• v.21 no.3 s.52
• /
• pp.153-158
• /
• 1982

The study was conducted to obtain the basic information on the diseases epidemics of vegetable crops grown in Namji, Jinju, Gimhae and Suncheon under the extremely varied and specified conditions, plastic film house. The disease survey was conducted from the end of April, 1951 to April 1982. Leaf mold and late blight were serious foliar disease in tomato during the seedling stage, especially when the infected seeds were sown. The diseases increased rapidly 35 days after seeding. In both continuous cultivation of cucumber and rotation with upland crops, incidence of Fusarium wilt was severe while incidence of the disease was negligible in cultivations after paddy rice or grafting on pumpkin. Downy mildew of cucumber was severe in Jinju and Suncheon area, however, it was not so serious in Namji area where the growing season of cucumber was unfavorable for the maximum disease incidence. Cucumber mosaic virus disease was prevalent in the areas surveyed and the disease incidence was increased rapidly after June. Powdery mildew prevailed at the early stage of cucumber growth after transplanting in Namji area. Root rot and wilting caused by Phytophthora capsici was as the most destructive disease in pepper grown under the vinyl house, especially in Namji and Jinju area where the pepper has been cultivated intensively. The Phytophthora attacked most parts of young plants during the winter time and then induced crown rot on the adults plants. Cultivation of pepper in vinyl house was almost impossible because of the Phytophora disease by the end of June. Virus diseases to tomato plants were prevalent throughout the surveyed area and the damage was also severe. In Jinju and Gimhae area leaf mold and late blight showed high infection rate in tomato during the harvest time.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.451-459
• /
• 2019

This study is aims to examine how the skeleton character in Pixar's Animation is visualized for the narrative of the film and suggests the direction of attractive character development corresponding to the story. First of all, it was conducted the case studies on the narrative of animation, character design, character's emotion expression, and animations featuring skeleton character. Based on this study, it was derived the visual representation of the skeleton character featuring in and analyzed the role and function in the animation. As a result, the expressions by the skeleton's eyes, eyebrows, mouth, lips, and jaw played the most important role for the emotional expression and lines in , and the major characteristic for human facial expression was reflected in the design of the skeleton character. In addition, the various props were used to provide the detailed informations of the skeleton's character, and it was expressed the movement emphasizing its essential attribute. Finally, the skeleton's symbolic image was strengthened by composing and arranging the skeleton's image through Mise en scene. It is expected that this study will be used as a reference for the animation character related researchers and practitioners in the business and it helps develop attractive characters fir the narrative animation in the future.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.4.1-4
• /
• 1981

The statistical study was done on 74 cases of foreign bodies in the air passages, who visited the department of otolaryngology of SNUH during recent 5 years from 1975 to 1980. The result was as follows, 1) Of the total 74 cases, 55 cases were male and 18 cases were female. The ratio between male and female was 3 : 1. 41.8% of all-cases were under 2 years of age, 75.5% were under 3 years, and 83.6% were under 5 years. 2) Major symptoms on visit were dyspnea, cough, cyanosis. No significant symptoms was noted in 6.7%. Initial physical findings were coarse breathing sound, decreased breathing sound, and stridor. No abnormal physical findings were noted in 10.8%. 3) 48.6% of total cases visited hospital within 24 hours. There was one case who visited hospital over 2 years later. 4) Initial simple chest film showed atelectasis in 25.0%, emphysema in 32.8%, definite foreign body shadow in 17.2% and within normal limit in 17.2%. 5) 60.8% of total cases were vegetables, 15.5% were metals, 16.2% were fish bone, and 2.7 % were others. 6) Vegetables were most frequent foreign bodies in the cases under 5 years of age. 7) 40.5% of total cases were lodged in the right main bronchus, 31.0% were in the left main bronchus, 9.8% were in trachea and 6.7% were in multiple sites, 8) Foreign bodies were removed by ventilating bronchoscopy in 82.3%, by tracheostomy only in 2.7%, by tracheal suction in 2.7%, by spontaneous removal in 1.3%, by thorachotomy in 5.4% and 5.4% of total cases were expired.