• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.80-88
• /
• 1996

The aim of the present investigation was to see the effect of combined use of PDGF BB and IGF -1 on the guided tissue regeneration(GTR) using barrier membrane in the treatment of human furcation involvement. Twelve patients with initially diagnosed as having moderate to advanced adult periodontitis with mandibular class II buccal furcation defects have been wer selected. Initial scaling and root planing has been performed and baseline data consisting of probing depths and attachment levels have been recorded prior to surgical procedures. The GTR procedures using either barrier membrane(control : ePTFE) alone or together with the application of PDGF - BB and IGF -l(experimental : ePTFE+PDGF/IGF) have been done under the routine guidelines. During the surgery, the distance from CEJ either to the bottom of the bone defects(CEJ - BD) or to the bone crest(CEJ-BC) were measured. Horizontal distance to the deepest area in the furcal defects were measured from the reference line connection the most prominent bony walls of the two buccal roots. 6 months following the GTR therapy, all the measurements were made repeatedly. The probing attachment gain of the experimental and the control grous were 2.14mm and l.07mm, respectively with no statically significnant difference. Amont of vertical bone fill in the experimental and the control groups were 2.43mm and 2.29mm, rexpectively. Amonut of horizontal bone fill were 2.86mm in the experimental group and 2.17mm in the control group, respectively. However, there were no significant differences in the amount of bone fill(both vertical and horizontal)between the two groups.

• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.184-193
• /
• 2016

목적: 중합 시간이 bulk fill 유동성 복합레진의 미세누출에 미치는 영향을 마이크로시티를 이용하여 평가하고자 하였다. 연구 재료 및 방법: 30개의 발거된 인간 대구치에 변형된 2급 와동인 vertical slot cavity를 형성하였다. SonicFill과 SureFil SDR flow을 단일 충전하였으며, 다른 중합시간(20, 40, 60초)으로 광중합 하였다. 모든 표본은 5000번의 thermal cycle을 시행하였다. 치아는 silver nitrate 용액에 24시간 동안 침전 후 8시간 동안 현상액에 침전하였다. 마이크로시티를 사용하여 시편을 촬영 후 침투된 silver nitrate solution을 3차원적으로 재건하여 그 부피를 측정하였다. 변연 누출 결과값의 통계 처리는 Mann-Whitney test를 사용하였다. 결과: 광중합 시간의 증가는 두 bulk fill 유동성 복합레진에서 변연 누출을 증가시켰다. 두 복합레진 사이 유의한 차이는 없었다. 결론: 중합 시간은 bulk fill 유동성 복합레진의 변연 누출을 증가시킬 수 있는 요인이었다. 또한 마이크로시티를 통해 레진-치아 계면에서 변연 누출의 양을 비파괴적 방법으로 3차원적으로 재건하여 측정할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.869-872
• /
• 2000

The aim of present work was to fabricate the piezoelectric composite materials of low megahertz applications such as non-destructive testing of materials. Among all the various composites, those with PZT rods embedded in Spurrs epoxy with regular periodicity (1-3 connectivity) was fabricated by dice and fill method. The fabricated size of the PZT cell were 0.18X0.18, 0.28X0.28mm$^2$, respectively. And the volume ratio of the PZT cell were 52, 64%, respectively. The resonant frequency and anti-resonant frequency of the composites were 3.5 MHz and 4.3MHz, respectively. The piezoelectric coupling coefficient were about 38 and 37% and the mechanical quality factor were about 12.7 and 22. These value were very different from these of bulk PZT Plate.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.101-104
• /
• 2002

The influences of the powder packing density on the Bi-2223/Ag tape have been investigated. For packing powder, both method of uniaxial press and packed rod form made by cold isostatic press(CIP) have been applied. As the pressure of cold isostatic press(CIP) is increased, fill factor and critical current (Ic) of Bi-2223/Ag tape is increased. At a pressure of 2000kgf/cm$^2$, fill factor reach ∼3l% and this sample has the engineering current density(Je) value of ∼8.5kA/cm$^2$(Ic ∼77A, Jc ∼ 30kA/cm$^2$). The tape sample packed by uniaxial press method shows more sawsaging effect than the sample processed by cold isostatic press(CIP), resulting from inhomogity of powder distribution produced by the process of uniaxial press.

• 한국광학회지
• /
• 제10권1호
• /
• pp.32-39
• /
• 1999

본연구에서는 연속적으로 세기 분포를 갖는 CGH 패턴을 두 가지 서로 다른 방법으로 이진화를 하고 그 패턴을 LCSLM(liquid crystal spatial light modulator)에 적용하여 재생 특성을 비교해 보았다. 이진화 방법으로는 에러확산 알고리즘과 직접 얀자화 방법을 사용하였다. 재생 특성 비교에 사용한 인자들은 전체 밝기 평균, 평균 제곱 에러, 그리고 회절 효율이다. 실험에 사용한 LCSLM은 256$\times$256 점들을 가지고 87% fill factor와 15$\mu$m pixel pitch를 가지는 이진의 전기적으로 어드레스되는 반사형 강유전성 액정 공간 광 변조기이다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.403-405
• /
• 2009

본 연구에서는 염료태양전지의 제작 시 고가의 TCO전극을 사용하지 않고 간단히 광전극을 대체할 수 있는 방법으로 메쉬전극을 이용하는 TCO-less 염료태양전지를 제작하였다. 메쉬전극을 이용한 TCO-less 염료태양전지의 구조는 "Glass / 메쉬전극($TiO_2$를 딥코팅 한 후 염료를 흡착시킴) / 전해질 / 멤브레인 필터 / 상대전극(Pt-coated TCO) / Glass" 로 구성된다. 제작된 샘플의 광전변환 효율은 약 1.5% 였으며 fill factor는 0.55로 나타났다. 향후 계획으로 효율을 향상 시킬 수 있는 방법을 도입하여 광전류밀도와 fill factor를 개선하는 연구를 진행할 예정이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.360-363
• /
• 2009

In order to improve the overall power conversion efficiency, it is very important to reduce the interface resistance of dye-sensitized solar cells (DSSCs). In this approach, tiny $TiO_2$ nanoparticles with the primary size of 10~20nm were synthesized and deposited between FTO glass and preformed $TiO_2$ layer by $TiOCl_2$ treatment, and also Pt catalysts were deposited on the counter electrode by both ion-sputter and thermal deposition to reduce the electrolyte-counter electrode interface resistance. The influence of these processes on the performace of DSSCs were discussed in terms of fill factor, short circuit current, and conversion efficiency.

• 센서학회지
• /
• 제10권6호
• /
• pp.279-285
• /
• 2001

본 연구에서는 HNA를 이용한 Si의 bulk 식각을 통해 렌즈 모양을 갖는 몰드를 제작 한 뒤 그 위에 렌즈로 사용될 SU-8을 도포 한 다음 몰드와 렌즈를 분리시키는 방법으로 마이크로렌즈 배열을 제조하는 공정을 개발하였으며 이는 공정순서가 단순하며 경제적인 것을 특징으로 한다. Stirring 속도 800rpm 이상의 조건에서 높이 $45{\mu}m$, 직경 $150{\mu}m$의 높은 fill factor를 가지는 렌즈의 제작조건을 확립하였으며, 이와 같이 제작된 초소형 렌즈는 적외선 감지 소자와 같은 영상 소자나 projection display 영역에 응용되어 소자 성능을 향상시킬 수 있다.

• Advances in Energy Research
• /
• 제3권3호
• /
• pp.143-155
• /
• 2015

The Nile blue has been used as a photosensitizer with Arabinose as a reductant in photogalvanic cell for optimum conversion efficiency and storage capacity. Reduction cost of the photogalvanic cell for commercial utility. The generated photopotential and photocurrent are 816.0 mV and $330.0{\mu}A$ respectively. The maximum power of the cell is $269.30{\mu}W$ where as the observed power at power point is $91.28{\mu}W$. The observed conversion efficiency is 0.6095% and the fill factor 0.2566 has been experimentally found out at the power point of the photogalvanic cell, whereas the absolute value is 1.00. The photogalvanic cell so developed can work for 120.0 minutes in dark if it is irradiated for 200.0 minutes that is the storage capacity of photogalvanic cell is 60.00%. The effects of different parameters on the electrical output of the photogalvanic cell have been observed. A mechanism has also been proposed for the photogeneration of electrical energy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1305-1306
• /
• 2007

To lower the fabrication cost of silicon solar cells, a surface treatment using a dielectric barrier discharge instead of a wet cleaning technique was examined on electrode surfaces on silicon solar cells. The fill factor obtained through measuring current-voltage characteristics was evaluated, and the treated surface state was characterized by energy-dispersive X-ray. It was found that the dielectric barrier discharge effectively activated the electrode surface and the surface treatment on finger electrodes contributed greatly to improve the fill factor.