• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.29-40
• /
• 2009

On April 28th of 2006, a set of Buddha's reliquary was excavated from the pagoda in n Nacsan Temple. According to the record, the relics were put in the pagoda in the 18th year of King SookJong in the Chosun Dynasty (1692). The present paper examines ten pieces of wrapping clothes covering reliquary found in the pagoda. They are especially precious data in the history of textiles because they were blocked off from outside and was preserved in good condition with vivid colors still remaining after more than 300 years. Of the ten pieces of wrapping cloth, five were double-layered and the other five were single-layered. They include 15 pieces of silk fabric but, excluding repeated use of the same silk fabric, the total of 11 pieces of silk fabric were examined. All 11 kinds of silk fabric were patterned, 9 of which were Satin and the other 2 were Twill. Of the 9 Satin pieces, 8 pieces were 5-end satin which had the ground of 5-end warp satin with the figure of 5-end weft satin. The remaining 1 Satin piece were more splendid with prominent figures by using warp and weft of different colors. The 2 Twill pieces used twill weave-the ground was 3-end warp twill and the figures were 5-end weft twill. Both of the Twill pieces were weaved with character patterns, partly using wrapped gold thread as supplementary weft. The patterns of 11 pieces of silk fabric include flower, dragon/phoenix, cloud, and geometric patterns. Five were flower patterns, three were dragon/phoenix patterns, two were geometric pattern, and one was cloud pattern. In addition, various treasure patterns, character patterns were utilized as supplementary patterns. The flower and phoenix patterns reflect characteristics of the textiles of the 17th century whereas check pattern and cloud pattern were very unique.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.64-72
• /
• 2007

Under the AE methods, the valid condition analysis and evaluation the leak etc, resulted by the AE signal pattern on the bottom plate of ground tank at full. In next more, the gradient of accumulation amplitude distribution analysis and comparison the energy, count, and duration time that noise of EMI signal were removed. EMI signal showed height-energy, count, and duration time, it also appeared great gradient of accumulation distribution. Then, with the pure remaining AE signals cluster analysis and location. It would possibly assume of damage with corrosion. Total cluster 20 and energy showed between the maximum 11,990 and 8,565 which is much lower than above figure and event number showed from 8 to 5. Even when it difficult to certify damage by open, as it is raised higher height-sensitivity and threshold by 60 dB. It would possibly presume of location source more accurately.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.4
• /
• pp.319-332
• /
• 2002

Domestic masonry railroad tunnel lining consists of red bricks or granite stone blocks and mortar. It is necessary to evaluate the behaviour of the masonry tunnel lining during an earthquake because the lining was constructed without the consideration of seismic loads. In this study, a methodology to evaluate the seismic resistant capacity of masonry tunnel linings was proposed, i.e. material property evaluation and seismic analysis technique. The red brick masonry tunnel lining is arrayed with multi-layers composed of 3 to 5 bricks depending on ground conditions and each brick is attached with mortar. Equivalent property concept was adopted to consider the stiffness difference among the red brick material itself and joints between bricks. Response spectrum analysis was performed by considering ground-structure interactions. A parametric study was performed to figure out the effect of relative stiffness between the lining and rock mass on the seismic behavior. A resonable countermeasure to minimize the earthquake-induced damage was also proposed.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.1
• /
• pp.11-22
• /
• 2014

In this study, numerical analyses and model tests were conducted to figure out the behavior of a slope reinforced by upward drainable soil nails during rainfall. The model tests were carried out on both reinforced and unreinforced slopes. To verify the results of the tests, seepage analyses were performed and compared with the test results using a commercial program, SEEP/W. The results showed that the numerical analyses have in overall a good agreement with the experiments in the variations of ground water level and pore water pressure even though there is some time delay for the experiment before the changes in the ground water level and pore water pressure after rainfall are observed, while the numerical analyses not.

• Journal of the Korean Geographical Society
• /
• v.48 no.3
• /
• pp.453-465
• /
• 2013

This paper aims to reveal that 'identity' plays the crucial role of explaining the relation between humans and space. Geography is preoccupied with footprints of humans which are engraved on the ground. It explores why such tokens are left over. It explains the existence of humans through footsteps of them. Men leaves traces of themselves to notify that who I was and who we were. The traces left behind by humans contain narratives of their own. Through those narratives, the very men who left the traces on the ground are to be grasped. A trace engraved by a person expresses its own identity of representing that person, so the narrative contained by one trace is the narrative of that individual. The identify which is composed of its own narrative can be largely divided into two types. The two are 'changing identity' and 'unchanging identity'. 'Changing identity' shapes the identity of oneself by difference. 'Unchanging identity' constructs the identity by identifying itself with sameness. However, as one's figure in everyday life becomes identical or different, identity also varies through processes of generation and repetition. Therefore, identity is currently changing and in progress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3422-3427
• /
• 2010

In this paper, we presents a sensor calibration technique using stereo X-ray images to provide efficient inspection of fast moving cargo objects. Stereo X-ray scanned images are acquired from a specially designed equipment which consists of a X-ray source, dual-linear array detector, and a conveyor system. Dual detector is installed so that rectified stereo X-ray images of objects are acquired. Using the stereo X-ray images, we carry out a sensor calibration to find the correspondences between the images and reconstruct 3-D shapes of real objects. Using the Image acquired from the stereo detectors with varying distances, we calculated the GCP(ground control point)of the image. And we figure out the error by comparing calculated GCP and GCP of the real object. The experimental results show the proposed technique can enhance the accuracy of stereo matching and give more efficient visualization for cargo inspection image.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.380-387
• /
• 2012

A complex seismic survey, which is nondestructive inspection, is used often recently in estimating the location of reclaimed cultural assets. Such a method is the best way to estimate the location of cultural assets most effectively in a short time at a construction site. This study estimated the reclamation location of a cultural asset by using magnetic gradient survey, earth resistivity survey, and ground penetrating radar survey (GPR) in order to figure out the distribution territory in the area with possibility of creation of reclaimed cultural assets in the past. As a result, it was located at +15m on the X axis and +90m on the Y axis on the floor plane coordinate of the study target area. It was shown that the major axis is about 20m long in the north-northeast direction and the width is about 5m. The depth of development distribution of anomaly zone was estimated as about 1.5~3.0m. Geophysical survey is expected to be used as a efficient and accurate way to excavate the reclaimed cultural assets in future.

• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.735-743
• /
• 2007

A grouting method is the way to effectively prevent pollutants from spreading into the ground during the digging process of groundwater. This study, based on the comparative study of grouting methods being generally accepted, suggests various construction methods which are suitable for geological structure as follows: In Jeju Island, it is very likely that rocks may fall in shuttered zones such as cracks, joints, scoria layers, and clinker layers. For this reason, it is recommended that materials be injected from the bottom toward the top, not from the top to the bottom. In the case where the amount of injected materials become too large in the areas of cracks or joints because of high level of permeability coefficient, grouting materials which smeared into surrounding areas may cause unwanted cut in the aquifer of the bottom level. To avoid this, the amount of water should be reduced from the typical water-cement ratio of 1:2, and grouting materials with larger grading should be used. If the deep excavation of ground is made in Jeju Island, it is likely to have lots of voids because of geological characteristics. Based on the results of this research, it is found that to construct interior casing, the centralizer should be attached to the casing to prevent the casing from being in contact with the counter fort. The grouting in Jeju Island should be thicker than usual. To avoid over-use of grouting materials, to prevent grouting in more than necessary zone, and to facilitate grouting of void areas, the flexible selection of materials is required. And, to exactly figure out the interior of dug well, an examination through CCTV should necessarily be performed when grouting work is in progress.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.3
• /
• pp.185-198
• /
• 2012

This paper is to analyze consumer's acceptance phase of innovative IT product on the ground of dividing into product and application phase. In the acceptance phase of product determinants to consumer's satisfaction were analyzed and TAM(Technology Acceptance Model) were applied to the acceptance phase of application. It is analyzed that how well expected usefulness and perceived satisfaction to product have positively influence its performance and perceived satisfaction respectively in the acceptance phase of the product. In the acceptance phase of application, factors to consumers' satisfaction were analyzed to investigate its influence to the usefulness of application. Usefulness expectancy to the application and product were analyzed to figure out consumers'intention to use the product and effort and cost going into application use were also analyzed. Empirical study was implemented aimed at smart phone users. As a result, perceived usefulness expectancy to product have positively influence on perceived product performance and perceived product performance also affects perceived product satisfaction significantly. Although product satisfaction doesn't affect usefulness expectancy to the application, usefulness expectancy to the product and perceived product performance have positively influence on usefulness expectancy to the application significantly. And also usefulness expectancy to the both of application and product have positively influence on consumer's intention to use the product but consumer's effort and cost going into application doesn't affect to it, it's hold forth the possibility that consumer's effort affect consumer's intention to use the product.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.540-552
• /
• 2010

This research forms preliminary data for the coordination of environmental color planning in industry through a color analysis of work clothes and the work environment. A digital camera was used to study the work environment of two major shipbuilding companies located in Geoje city and Goseong county. The picture data was analyzed as G (ground: environment) and F (figure: clothes), and analyzed hue, value, and the chroma value through a Muncell conversion 9.0.6 from the color cluster, number of pixel, and RGB value. The results are as follows: First, GY, Y color were mostly used in the shipbuilding environment and work clothes. The color value was used in a relatively wide range but very low chroma (0-3), dark grayish, grayish tone dominated both fields. Second, the use of limited colors cannot be secured for safety in attention of the shipbuilding field. Third, unclear and vogue colors lessened the optical tiredness of workers that helped in the prevention of industrial accidents. Color combination and color selection should be considered for a secure safety color coordination between work clothes and the work environment when it comes to complicated color principles.