• Journal of Korean Society of Forest Science
• /
• v.10 no.1
• /
• pp.7-16
• /
• 1970

There are 19 species of bamboo in Korea, among which few are of commercial value. The Phyllostachys has wide range of utilization, for sea weed production, industrial production of various bamboo wares, etc. The total export from Chenla-Namdo to some more than ten countries was recorded 204,000,000 won worth in 1969. As civilization develops so does the techniques of bamboo works, and they in turn accelerate the demand for bamboo wood of better quality. In the light of this trend, the author attempted to make bamboo plants to develope a quadragular culm with elaborate design as disired instead of the original round one, with the expectation that it might be widely welcomed by hand workers, interior decorators. Here are some facts found out in this experiment: 1). The greater the diameter of the shoot at the eye level was, the better result was brought, and as shown in Fig. 5 the rate of success was 72% with the shoots of 7.5 cm thick. 2). The shoots of 30 cm in length showed 100% of success, developing into a desired quadrangular culms without fail(See Fig. 6). 3). The intensity of wood fiber increased as time lapsed, without receiving any influence by the weather (See Fig. 7, 8). 4). During the growing, the culm proved to be flexible enough to bend up to 90 degree (See Fig. 9). 5). In an attempt to promote the value of bamboo by decoration, the author tried to impress rectangular indents on the culm. The indention using a qudangular board 1cm smaller in width than the shoot diameter gave 100% success (See Fig. 10). 6). Design experiment was also successful both in coloration and impressing and the resulting designs delicately depended on the kinds of chemicals used and their combination (Table 2) (See Fig. 12, 13, 14). With the above mentioned findings, the author concludes that the mass production of quadrangular bamboo culm is quite a promissing as an new industry to develope bamboo works to a more valuable one. This research was carried out with the research fund provided by the Ministry of Education in 1969.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.77-87
• /
• 1972

The fruiting phase of rape under transplanting and direct-sowing conditions has been studied at Mokpo during the 2 years period from 1970 to 1971. Two varieties, Yudal and Miyuki were used in this study. The planting space and sowing time were also incorporated into this study. The results could be summarized as follows: 1. The plant tape of rape was nearly umbrella-shaped of all, but has changed to the laid elliptical-shaped, broadly ovate and spindle-shaped under different varieties and cultural conditions in the plant diagram(Fig. 2). 2. The length of the primary branches for each nodes had a tendency to the symmetric apical curve with the apex at the upper 10-12th node in the transplanting. but to the upper bias apical curve with the apex at the upper 5-7th node in the dense-sowing(Fig.3). 3. The ear of main stem was longer, more pods, heavier 1, 000 grains and more grain yield than ear of primary branches of all, Especially, as for that, the rate of yield constitution per plant in the direct-sowing was higher than in the transplanting(Fig. 4, 5, 6, 7, 8, 9). 4. The ear-length of the primary branches for each nodes had a tendency to the relatively slowly apical curve with the apex at the upper 3-4th node in the transplanting, but to the lower bias apical curve with the apex at the upper 2nd node in the dense-sowing. Especially, the possibility of growth at the lower ears was few in the early variety (Fig. 4). 5. The number of pod per ear on the primary branches for each nodes had a .tendency to the curve of ear-length with the apex at the upper 5-8thnode in the transplanting and at the upper 4-5th node in the dense-sowing (Fig. 5). Accordingly, a high positive correlation was found between the ear-length and number of pod per ear (Table 2) 6. In the transplanting, the high rate of effective ear was from the upper nods to the 12th node, but below the 16-17th nodes was ineffective. However, in the early dense-sowing the high rate of effective was to the 7th node. but below the 10th nodes was. ineffective. Especially, in the early variety has difficult to secure of poi-numbers for ineffective of the lower nodes(Fig. 6.). 7. The density of pod setting of the ear of main stem was the longest of all ears, and the lower nods were, the shorter it became. That had a tendency to the evidently apical growth. However. in the early variety, it was lengthened according to growth of ear-length(Fig.7). 8. The pod-length of the medium nodes was longer than the upper and lower, and the possitive correlation between pod-length and number of grain per poi was very high(Table 2.). 9. In the grain yield per node of primary branches, the most yielding node of transplanting was the upper 9th node, of dense-sowing 4-5th node(Fig 8.), and the possitive correlation between grain yield per node and ear-length or number of pod per ear was very high(Table 2). 10. The grain yield of ear of main stem was higher than that of primary branches in the percentage of dependence for grain yield per plant. The limint node of 50% of dependence to cumulative grain yield per plant was the upper 7-8th node in tranplanting, in the early dense-sowing 4-5th node, and in tke late dense-sowing-3th node(Fig. 9). 11. In the weight of 1, 000 grains the lower nodes were, the lighter it becames in dense-sowing. Therefore, this was also lighter than in the transplanting to the (Fig. 10.). 12. The oil content of grain at the medium nodes was low in the early variety, but at the ear of main stem and upper 1st node it was extremely high(Fig. 11.).

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.40-45
• /
• 2002

2002년 8월 창원의 한공장 신축공사장의 건물 내부에서 공사중 LPG용기(20kg) 및 산소용기(41$\ell$) 각 1개가 파열되면서 가스가 누출, 폭발하여 작업자 1명이 사망하고 6명이 부상당한 사고가 있었다(Fig. 1, Fig. 2)(중략)

• Korean journal of food and cookery science
• /
• v.16 no.4
• /
• pp.363-366
• /
• 2000

This study was attempted to compare the properties of proteolytic enzymes in fruits(Pear, Kiwifruit, Fig, Pineapple and Papaya) for the application of scientific information to cooking. The results were as follows: 1. The optimum temperature of crude proteolytic enzymes in pear, fig and pineapple is 60$^{\circ}C$ and it was relatively active in 40-70$^{\circ}C$; papaya showed max. activity in 60$^{\circ}C$ and highly stable activity in 40-80$^{\circ}C$, but kiwifruit showed max. activity in 40$^{\circ}C$ and it maintained to 70$^{\circ}C$. 2.. The crude proteolytic enzymes of pear, fig, pineapple and papaya showed opt. pH at pH 7.0 and maintained at pH 5.0-8.0, but max. activity of kiwifruit observed in pH 3.0 and pH 5.0-8.0. 3. As a result of comparison of total activities of fruits per kg unit, the order of activities was pineapple > kiwifruit > papaya > fig > pear.

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.1
• /
• pp.8-11
• /
• 1979

The apparatus for measuring the static withdrawal resistance of nail is the AUTOGROPH S-500 static testing machine. The nails were 0.25 - 0.26 cm in diameter, 4.9-5.1cm in length, and were driven into wood for a depth of 3.0 cm. The physical properties of wood specimens are shown in table 1. Some data obtained in this experiment are as follows 1) The effects of the direction of driving and the time after driving upon static withdrawal resistance are shown in fig. 2-3. 2) The relations between static withdrawal resistance are moisture content of wood are characterized by nearly straight line as shown in fig. 4-5. The empirical formula areas follows: Y = -0.074 x + 12.73 (Pinus koraiensis Sieb & Zucc. - radial) Y = -0.073 x + 7.54 (Pinus koraiensis Sieb & Zucc. - longitudinal) Y = -0.061 x + 12.80 (Larix leptolesis Gord. - tangential) Y = -0.081 x + 7.61 (Larix leptolepsis Gord. - longitudinal) Where Y is the static withdrawal resistance ($kg{\cdot}cm$) and x is the moisture content(%).

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.1
• /
• pp.112-118
• /
• 2005

Fig(Ficus carica L.) which belongs to Moraceae family has been used as digestion promoter, cure for ulcerative inflammation and eruption in Korea. Figs have very short preservation period and can be kept only 1 week even in the refrigeration system. The possibility of wine-making from Korean figs was tested by analyzing the fermentation characteristics, proximate analysis and free sugar contents of wine made of slices with 20% sugar addition. Ethanol fermentation of the figs by Saccharomyces cerevisiae was done rapidly. The ethanol contents, pH, total acidity and sugar content were 12.1%, 3.91, 0.42% and 9.9 °Brix, respectively. The results from the sensory evaluation were as follows. The wine made from the sliced figs were better than that from fig juices in their sensory scores. The wine made with frozen figs was not different from that made with fresh ones. To improve the quality of wine, the addition of dried leaf powder in the concentration of 100 ppm were tried and found it was superior to the one made without leaf.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.3
• /
• pp.121-126
• /
• 1979

The objective of this study was to grasp the condition of the distribution of water temperature in the warm water pool, and these observations were performed in Wudu warm water pool located at Wodu-Dong in Chuncheon. The results summarized in this study are as follows; 1. The horizontal distribution charts of water temperature at each depth of points were shown as Fig. 3, Fig. 4, and Fig. 5, respectively. In consequence of the observation, the condition of warm water was stagnant in the coner of warm water pool. As the result, it was found out that stagnant condition was the heaviest at water surface (depth; 0.05m), more heavier at middle depth (depth; 0.55m) and some heavy at bottom of the pool (depth; 1.10m). 2. The vertical water temperature change was shown as Fig. 6, and the mean water temperature of water surface (depth;0.05m) was higher about $2.2{\sim}3.3^{\circ}C$ than bottom water temperature. 3. Therefore, it was required to device such structures as form of broad cannels or overflow diversion weirs to mingle with top and bottom water.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.157-162
• /
• 1990

기계의 정밀도 향상을 위하여는 기계에 대한 보다 정확한 해석을 요구한다. 그러나 실제 기계 시스템은 마찰, Backlash, Saturation등과 같은 비서형 특 성을 가지고 있어 시스템의 해석 및 제어가 어렵게 된다. 특히, 축, 링크, 기 어, 풀리, 베어링등의 기계요소에서는 마찰로 인해 정밀도가 크게 덜어지고 있어, 마찰에 의한 동특성 및 제어는 많은 연구자들에 의해 관심의 대상이 되어 왔다. 마찰력을 고려한 기계시스템의 운동은 정지상태 근처에서 마찰력 의 변화가 심한 비선형 동특성을 보이고 있어 그 해석에 어려움을 겪고 있 다. 실제 마찰이 저속에서 고급 비선형임에도 불구하고 가장 널리 사용되는 형태의 모델로서 쿨통 마찰을 고려한 운동방정식 조차 비선형성으로 인하여 해석에 어려움이 따르고 있다. 마찰은 오랜동안 연구되어 오면서 Fig.1, Fig2 와 같이 등가선형점성 감쇠, 쿨통마찰, 정적마찰로 모델화되거나 이들의 조 합으로 나타내었다[1-5]. 마찰력은 시간영역에서도 연구되어 Walrath[7]는 Fig.3-a의 속도가 역전되는 지점에서 마찰토오크가 .+-.Tf를 공유하는 문제 를 고려하기 위해, Fig.3-b와 같이 동적마찰모델을 사용하였다. 최근의 연구 로서 Armstrong[7]은 마찰의 위치의존성을 고려한 정확한 마찰모델을 설정 하여 개루프제어에 적용, 좋은 제어특성을 확인하였고, Canudas[8]는 저속영 역에서 overcompensation시 limit cycle과 gain의 관계를 해석하였다.

• Journal of Chest Surgery
• /
• v.25 no.6
• /
• pp.616-620
• /
• 1992

A sleeve lobectomy is an appropriate operative procedure in patients with endobronchial neoplasms of low-grade malignancies in the proximal airways and for a small but significant number of patients with carcinoma. Here, we present eleven cases of sleeve lobectomy which were performed from 1984 to the August of 1991 in the Department of Thoracic Surgery of Seoul National University Hospital. The sex distribution was 6 males and 5 females in the age range from twenty to sixty seven, with an average of 44.9 years. The pathologic diagnoses were 7 cases of pulmonary malignancies: carcinoid in two, mucoepidermoid carcinoma in two, adenoid cystic carcinoma in one, adenocarcinoma in one, and squamous carcinoma in one. Other diagnoses were two cases of tuberculous bronchial strictures and two cases of benign tumors: one case of pesudolymphoma and one case of neurilemmoma. The procedures consisted of five right upper sleeve lobectomies [Fig. 1], four left upper sleeve lovectomies [Fig. 2], one left lower sleeve lobectomy[Fig. 3], and one right middle and lower lobetomy [Fig. 4]. All except one had a normal preoperative pulmonary function. The case which had a poor pulmonary function was a 66-year-old female adenocarcinoma patient. She seemed to be very intolerable to pneumonectomy [predicted FEV1=0.60L]. Therefore, she had a right sleeve upper lobectomy and experienced smooth postoperative course without any pulmonary problems. All cases had good postoperative results and no postoperative complications.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.110-110
• /
• 2000

Cantilever-shaped lateral field emitters were fabricated and their electrical characteristics were tested. As shown in Fig.1, poly-silicon cantilevers were fabricated by the surface micromachining and they were used to the vacuum magnetic field sensors. The tunneling devices were vacuum sealed with the tubeless packaging method, as shown in Fig.2 and Fig.3. The soda-lime glasses were used for better encapsulation, so the sputtered silicon and the glass layers on the soda-lime glasses were bonded together at 1x10$^{-6}$ Torr. The getter was activated after the vacuum sealing fur the stable emissions. The devices were tested outside of the vacuum chamber. Through vacuum packaging, the tunneling sensors can be utilized. Fig.4 shows that the sensor operates with the switching of the magnetic field. When the magnetic field was applied to the device, the anode currents were varied by the Lorentz force. The difference of anode currents can be varied with the strength of the applied magnetic field.