• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.117-120
• /
• 2002

In this paper, we construct cryptographic accelerators using hardware Implementations of HMACS based on a hash algorithm such as MD5.It is basically a secure version of his previous algorithm, MD4 which is a little faster than MD5 The algorithm takes as Input a message of arbitrary length and produces as output a 128-blt message digest The input is processed In 512-bit blocks In this paper, new architectures, Iterative and full loop, of MD5 have been implemented using Field Programmable Gate Arrays(FPGAS). For the full-loop design, the performance Is about 500Mbps @ 100MHz

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.802-805
• /
• 2007

A hardware architecture is presented of a wavelet based multiple line addressing driving scheme for passive matrix displays using the FPGA (Field Programmable Gate Arrays), which will be integrated in the scalable video coding $architecture^{[1]}$. The incoming compressed video data stream will then directly be transformed to the required column voltages by the hardware architecture without the need of employing the video decompression.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.463-464
• /
• 2007

This paper presents the hardware-based genetic algorithm, written in VHDL. Due to parallel computation and no function call overhead, a hardware-based GA advantage a speedup over a software-based GA. The proposed architecture is constructed on a field-programmable gate arrays, which are easily reconfigured. Since a general-purpose GA requires that the fitness function be easily changed, the hardware implementation must exploit the reprogrammability.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.467-475
• /
• 2016

Ultrasonic propagation imaging (UPI) has shown great potential for detection of impairments in complex structures and can be used in wide range of non-destructive evaluation and structural health monitoring applications. The software implementation of such algorithms showed a tendency in time-consumption with increment in scan area because the processor shares its resources with a number of programs running at the same time. This issue was addressed by using field programmable gate arrays (FPGA) that is a dedicated processing solution and used for high speed signal processing algorithms. For this purpose, we need an independent and flexible block of logic which can be used with continuously evolvable hardware based on FPGA. In this paper, we developed an FPGA-based ultrasonic propagation imaging system, where FPGA functions for both data acquisition system and real-time ultrasonic signal processing. The developed UPI system using FPGA board provides better cost-effectiveness and resolution than digitizers, and much faster signal processing time than CPU which was tested using basic ultrasonic propagation algorithms such as ultrasonic wave propagation imaging and multi-directional adjacent wave subtraction. Finally, a comparison of results for processing time between a CPU-based UPI system and the novel FPGA-based system were presented to justify the objective of this research.

• 한국통신학회논문지
• /
• 제36권12C호
• /
• pp.727-737
• /
• 2011

본 논문에서는 FPGA(Field Programmable Gate Array)와 DSP(Digital Signal Processor)를 이용하는 실시간 차선 및 차량인식 시스템의 구현에 대하여 기술한다. 실시간 시스템의 구현을 위해서 FPGA와 DSP의 역할을 효율적으로 분할할 필요성이 있다. 시스템의 알고리즘을 특정요소 추출부분을 기준으로 분할하여 대량의 영상정보를 이용하여 소량의 특정요소를 추출하는 과정을 FPGA로 구현하고 추출된 특정요소를 사용하여 차선과 차량을 정의하고 추적하는 부분을 DSP에서 수행하게 하고, FPGA와 DSP의 효율적 연동을 위한 인터페이스 구성을 제안함으로써 실시간 처리가 가능한 시스템 구조를 제안한다. 실험 결과 제안한 실시간 차선 및 차량인식 시스템은 $640{\times}480$ 크기를 갖는 비디오 영상 입력에 대해 약 15 (frames/sec)로 동작하여 실시간 응용으로 충분함을 알 수 있다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.342-350
• /
• 2010

Randomizing the switching frequency (RSF) to reduce the electromagnetic interference (EMI) of switching power converters is a well-known technique that has been previously discussed. The randomized pulse position (RPP) technique, in which the switching frequency is kept fixed while the pulse position (the delay from the starting of the switching cycle to the turn-on instant within the cycle) is randomized, has been previously addressed in the literature for the same purpose. This paper presents a double-hybrid technique (DHB) for EMI reduction in dc-dc switching regulators. The proposed technique employed both the RSF and the RPP techniques. To effectively spread the conducted-noise frequency spectrum and at the same time attain a satisfactory output voltage quality, two parameters (switching frequency and pulse position) were randomized, and a third parameter (the duty ratio) was controlled by a digital compensator. Implementation was achieved using field programmable gate array (FPGA) technology, which is increasingly being adopted in industrial electronic applications. To evaluate the contribution of the proposed DHB technique, investigations were carried out for each basic PWM, RPP, RSF, and DHB technique. Then a comparison was made of the performances achieved. The experimentally investigated features include the effect of each technique on the common-mode, differential-mode, and total conducted-noise characteristics, and their influence on the converter’s output ripple voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.563-566
• /
• 2003

We have designed the power control unit which belongs to the power cabinet and controls the power supplied to Control Rod Drive Mechanism(CRDM) as a digital system based on Digital Signal Processor(DSP). The power control unit dualized as the form of Master/Slave has had its increased reality. The Central Process Unit(CPU) board of a power control unit possesses two Digital Signal Processors(DSPs) of the control DSP for performing the tasks of power control and system monitoring and the communication of the Control DSP and the Communication DSP. To accomplish the functions requested in the power control unit effectively, we have installed Field Programmable Gate Arrays(FPGAS) on the CPU board and have FPGAs perform the memory mapping, the generation of each chip selection signal, the giving and receiving of the signals between the power controllers dualized, the fault detection and the generation of the firing signals.

• 한국통신학회논문지
• /
• 제28권11A호
• /
• pp.936-944
• /
• 2003

본 논문에서는 FPGA (Field Programmable Gate Array)에 사용될 수 있는 AND/XOR기반의 기술적인 매핑 기법이 제안되었다. FPGA에서는 프로그램 블록들의 숫자가 정해져 있기 때문에 적절한 수의 입력을 가진 블록으로 회로를 나눌 수 있으면 효과적인 구현이 가능하다. Davio Expansion에 기반한 제안된 기법은 Davio Expansion 자체가 AND/XOR의 성질을 가지고 있기 때문에 XOR를 많이 포함하고 있는 에러 검출/수정, 데이터 암호/해독, 산술 회로 등을 구현하기 매우 용이하다. 본 논문에서는 제안된 기법을 이용할 때 구현되는 면적뿐만 아니라 속도도 현저히 저하될 수 있음을 MCNC 벤치마크를 이용하여 증명하였다. 면적이 줄어듦을 보이기 위하여 CLB (Configurable Logic Block) 숫자와 총 게이트 숫자가 이용되었다. CLB 숫자는 67.6 % (속도로 최적화 된 결과)와 57.7 % (면적으로 최적화 된 결과) 만큼 감소되었고 총 게이트 숫자는 65.5 %만금 감소되었다. 속도관련 결과를 확인하기 위해 사용된 최대 Path Delay는 현재 사용되고 있는 방법들에 비해 56.7 %만큼 감소되었고 최대 Net Delay는 80.5% 만큼 감소되었다.

• 센서학회지
• /
• 제7권5호
• /
• pp.364-371
• /
• 1998

Field programmable gate array (FPGA)의 전압 프로그램 요소(voltage programmable link)로써 사용될 새로운 안티퓨즈를 제조하였다. 제조된 안티퓨즈는 Al/$BaTiO_3/SiO_2$/TiW-실리사이드 구조를 갖는다. 안티퓨즈의 프로그램 전압은 $BaTiO_3$의 증착 두께를 조절함으로써 정확하게 조절할 수 있었다. $BaTiO_3(120{\AA})$/$SiO_2(120{\AA})$의 안티퓨즈에서 TiW-실리사이드 전극에 (-)극성을 인가하여 측정된 프로그램 전압은 14.4 V였으며, on-저항은 $40-50{\Omega}$의 값을 갖는다. 안티퓨즈의 전류-전압 특성은 Frenkel-Poole 전도 기구를 따르고 있으며, 그 특성은 인가 전압의 극성에 따라 차이를 보였다. 이것은 Al/$BaTiO_3$계면과 TiW-silicide/$SiO_2$계면 특성이 다르기 때문이다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.470-481
• /
• 2016

Field-programmable gate arrays (FPGAs) have received much attention from the nuclear industry as an alternative platform to programmable logic controllers for digital instrumentation and control. The software aspect of FPGA development consists of several steps of synthesis and refinement, and also requires verification activities, such as simulations that are performed individually at each step. This study proposed an integrated software-testing framework for simulating all artifacts of the FPGA software development simultaneously and evaluating whether all artifacts work correctly using common oracle programs. This method also generates a massive number of meaningful simulation scenarios that reflect reactor shutdown logics. The experiment, which was performed on two FPGA software implementations, showed that it can dramatically save both time and costs.