• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.277-279
• /
• 1994

In this paper, a novel field weakening scheme for the induction machine by the voltage control strategy is presented. The proposed algorithm ensures producing the maximum torque over the entire field weakening legion. Also by introducing the direct field-oriented control in the field weakening legion with large variation in machine parameters, the drive system can obtain the robustness to machine parameter variation. Moreover, by using estimated speed, sensorless speed control can be possible in very high speed lesion. Experimental results for a laboratory induction motor drive system confirm the validity or the proposed control algorithm.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.33-45
• /
• 2003

This paper defines the prototype of the geographic-object field that links the geographic-object and the geographic-field using an object-oriented geographic information system, and then implements the flood simulation in the saemangeum water resources management system that manipulates the water quantity of saemangeum lake and the height of gate using the watershed-object field. This paper combines the natural phenomena with the artificial phenomena that occurs on the water resources of the saemangeum, and designs the object oriented class hierarchy that is composed of the total watershed-object field, and then presents the algorithm for flood control. To visualize the class hierarchy of the whole geographic-object field and the partial geographic-object field, I use the UML(Unified Modeling Language). Attributes and methods of each class can acquire the functional reusability and compatibility using the COM of the ZEUS and the Visual Basic 6.0 of Win32 APIs. By means of implementing the flood simulation in the Saemangeum water resources management system, finally, this paper contributes on the efficient management of water resources.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1057-1062
• /
• 1991

Recently, due to the development of new technology and products, FA has been accelerating for obtaining high-quality and saving of resources and power. Introduction of automation to the field which has bad working condition is needed and welding is one of these field. In this study, solving algorithm for down hand control which requires in the automatic are welding system is proposed. For the verification of the algorithm, numerical examples are shown and visualization is carried out using developed graphic tools.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.193-200
• /
• 2020

This study proposes the Field Oriented Capacity Upgrade Program, an educational model for improving clinical practice of occupational therapy. The effectiveness of the self-directed learning ability and problem solving ability of students was compared by comparing the proposed educational model with the traditional teaching method. The research method was divided into the experimental group who participated in the model education and the control group who participated in the lecture class, and conducted similar experimental studies using the nonequivalent control group pretest-posttest design. In addition, the study participants conducted a preliminary and follow-up survey of a total of 135 students who participated in the education over three semesters. As a result of training using the proposed learning method, the experimental group improved self-directed learning ability and problem solving ability by 22% and 18%, respectively, compared to the control group. This study developed and proposed a new teaching-learning method to improve clinical practice of occupational therapy, and it is meaningful as a basic data of teaching-learning method to improve the ability required in various jobs.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1511-1519
• /
• 2014

The objective of this paper is to propose a modelling of a small compressed air energy storage system, which drives an induction generator based on a field-oriented control (FOC) principle for a renewable power generation. The proposed system is a hybrid technology of energy storage and electrification, which is developed to use as a small scale of renewable energy power plant. The energy will be transferred from the renewable energy resource to the compressed air energy by reciprocating air compressor to be stored in a pressurized vessel. The energy storage system uses a small compressed air energy storage system, developed as a small unit and installed above ground to avoid site limitation as same as the conventional CAES does. Therefore, it is suitable to be placed at any location. The system is operated in low pressure not more than 15 bar, so, it easy to available component in country and inexpensive. The power generation uses a variable speed induction generator (IG). The relationship of pressure and air flow of the compressed air, which varies continuously during the discharge of compressed air to drive the generator, is considered as a control command. As a result, the generator generates power in wide speed range. Unlike the conventional CAES that used gas turbine, this system does not have any combustion units. Thus, the system does not burn fuel and exhaust pollution. This paper expresses the modelling, thermodynamic analysis simulation and experiment to obtain the characteristic and performance of a new concept of a small compressed air energy storage power plant, which can be helpful in system designing of renewable energy electrification. The system was tested under a range of expansion pressure ratios in order to determine its characteristics and performance. The efficiency of expansion air of 49.34% is calculated, while the efficiency of generator of 60.85% is examined. The overall efficiency of system of approximately 30% is also investigated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.49-58
• /
• 2009

This paper presents the vector control of single phase induction motor(SPIM) to operate water pumping system using PV system with a maximum power point tracking(MPPT). The water pumping system uses a variable speed SPIM driven a centrifugal pump by field oriented control(FOC) inverter. The MPPT using a DC-DC converter controlled the duty cycle to track maximum power from PV under different insolation conditions. The duty cycle directly relate with a flux producing current control($i_{ds}$). The FOC inverter uses a current control voltage source inverter(CC-VSI). The simulation results are shown that the characteristics and performance of drive system, which varies as each conditions of light by expresses in voltage($V_{dq}$), current($I_{dq}$), speed of motor and torque.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.273-279
• /
• 2016

In this paper, a high-performance control of the induction motor for electric car was implemented to escape dependence of the rare earth magnet. Proposed high-efficiency control algorithm is a Direct Rotor Field-Oriented Control method that is insensitive to the fluctuation of motor parameters. In the DRFOC method, we need to compensate fluctuation of stator transient inductance and magnetizing inductance caused by the magnetic saturation of induction motor in high-speed area. This paper proposes Back-EMF Observer based on stator current estimator of Luenberger style. Motor control system applied the Voltage Feedback Flux Weakening Control method for high-speed operation. The proposed algorithm was verified through tests by the power train of Extended Range Electric Vehicle consists of induction motor and differential gear.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.122-129
• /
• 2008

The direct torque control method of an inverter fed squirrel cage typed induction motor using fuzzy logic controller has been proposed. This method is suitable for the traction which requires a fast torque response during the star-up and step change. The fuzzy control algorithm based upon the control principles of conventional DSC(Direct Self Controller) is developed. The fuzzy algorithm is tarried out by defuzzification strategy of the fuzzy output extracted from the possibility distribution of an inferred fuzzy control rule. The flux and torque of an induction motor are estimated by the dynamic model of the rotor flux field-oriented scheme which has decoupling characteristics and excellent dynamic response over a wide speed range. The proposed controller shows a good dynamic response. Moreover, since the fuzzy controller possesses highly adaptive capability, the performance of fuzzy controller is quite robust and insensitive to the motor parameters and change of operation conditions.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.7
• /
• pp.494-499
• /
• 2000

In a conventional stator flux-oriented(SFO) induction machine drive system, the field weakening method is to vary flux reference in proportion to the inverse of the rotor speed. This paper investigates that maximum torque capability cannot be obtained in the conventional system and proposes a new selection method of flux reference to obtain maximum torque capability over the field weakening region by considering voltage, torque, and current limits.

• Journal of Magnetics
• /
• v.4 no.3
• /
• pp.88-91
• /
• 1999

A series of NiO/NiFe bilayer films are deposited with the variation of Ar sputtering pressure for the NiO layers only. As the pressure for the NiO layers increases, the exchange anisotropy field (HEX) decreases gradually and becomes extinct at 2.5 mTorr, at which the maximum coercive force (HC) in the NiO/NiFe films is obtained. Randomly oriented columnar structures with HEX a few tens of Oe and oriented columnar structures with zero HEX are observed in the NiP layers by highvoltage hihg-resolution transmission electron microscopy. The vanishing of the HEX in the oriented structures is attributed to the lack of exchange anisotropy energy (EEX) between NiO and NiFe layers, which results in little contribution of interfacial unidirectional pinning anisotropy to the interface of NiO/NiFe bilayer.