• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.93-97
• /
• 2003

The crystallization behavior of amorphous silicon is affected by direction and intensity of electric field in FALC（Field-Aided Lateral Crystallization). Electric field was calculated in a simplified model using conductivity data of Mo, a-Si, $SiO_2$and boundary conditions for electric potential at the electrodes. The magnitude of electric field intensity in each corner of cathode was much larger than that in the center of patterns, and the electric field direction was 50~60 degree outside to cathode. And electric field intensity at a relatively small pattern was larger than that of a large pattern.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.4
• /
• pp.64-74
• /
• 1997

The purpose of this study is to analyze hydraulic characteristics of surface irrigation in a paddy field of direct seeding culture. Field experiment was performed in the paddy field of ridge direct dry seeding. Simulation by a numerical model was also accomplished with the data obtained from the field experiment. The model was developed by one dimensional zero-inertia equation and finite difference method. From the result of the field observation, the furrows of the experimental field were found to have various geometric characteristics. Advance distance and time were measured both in the field and by the model simulation for various furrow lengths and irrigation discharges. Roughness coefficients of each furrow were also estimated by the model.

• Journal of The Korean Association For Science Education
• /
• v.25 no.1
• /
• pp.57-77
• /
• 2005

This review is aimed at the understanding of learning in field-trips relating to education in outdoor activities. The review specifically concerns what studies have been undertaken by seeking evidence from research published between 1950 and 2004. The review indicates three common arguments on learning during field-trips. First, the learning in an informal learning environment based on first-hand experiences is most significant when it has meaning for the learner from field-trips. Second, learning aims and strategies in field-trips have evolved along with world-wide concerns towards the environment. Third, the experiences from field-trips can impact significantly on students' cognitive and affective learning. However, the research of field-trip experiences from outdoor activities has focused on learning outcomes far more than on the learning characteristics which facilitate students' learning. Therefore, further study is required, which can provide clear evidence on how such learning characteristics through field-trips can help studentsto successfully attain educational goals.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.47-53
• /
• 2018

In this paper, we investigate a collision avoidance algorithm for unmanned aerial vehicles using potential field based on the relative velocity of obstacles. The potential field consists of the attraction force and the repulsive force that are generated for the target and the obstacles. And the field can be classified into the attractive potential field generated by the target and the repulsive potential field generated by the obstacle, respectively. In this study, we construct an attractive potential field as a function of the distance between the UAV and the target position. On the other hand, a repulsive potential field is created by a function of distance and the relative velocity of the obstacle with respect to the UAV. The proposed potential field based collision avoidance algorithm is evaluate through simulations.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.424-428
• /
• 2003

The microstructure and field emission properties of carbon nanotubes(CNT) grown by Ni-catalytic chemical vapor deposition(CVD) were investigated. CVD-grown CNT had a high density of curved shape with randomly oriented. It was found that an increase in electric field caused an increase in field emission current and field emission sites of CNT. The maximum field emission current density was measured to be 3.6 ㎃/$\textrm{cm}^2$ at 2.5 V/$\mu\textrm{m}$, while the brightness of 56 cd/$\textrm{cm}^2$ was observed for the CNT-grown area of 0.8 $\textrm{cm}^2$ from a phosphor screen. Field emission current at constant electric field gradually decreased initially and then stabilized with time.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.3
• /
• pp.13-19
• /
• 2013

Superconducting field coils using a high-temperature superconducting (HTS) wires with high current density generate high magnetic field of 2 to 5 [T] and electromagnetic force (Lorentz force) acting on the superconducting field coils also become a very strong from the point of view of a mechanical characteristics. Because mechanical stress caused by these powerful electromagnetic force is one of the factors which worsens the critical current performance and structural characteristics of HTS wire, the mechanical stress analysis should be performed when designing the superconducting field coils. In this paper, as part of structural design of superconducting field coils for 17 MW class superconducting ship propulsion motor, mechanical stress acting on the superconducting field coils was analyzed and structural safety was also determined by the coupling analysis system that is consists of commercial electromagnetic field analysis program and structural analysis program.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.369-370
• /
• 2008

This paper describes the electric field distribution of high voltage polymer bushing with inner field shaper designs. The field control can be achieved by means of the designs of such internal field shaper. But high electric stress occurred between field shaper and central conductor by the closely space. In accordance, the floating and ring shield designs was importance for electric stress grading at critical parts of the bushing. The bushing has a central conductor, and internal ring shield or floating shield, gaps are formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.5-9
• /
• 1990

A permanent magnet synchronous motor(PMSM) differs from an ordinary synchronous motor in that the former has no field winding and the field flux can not be controlled by field current. A field-weakening control of PMSM utilizing the demagnetization due to d-axis armature reaction is equivalent to reducing the field current. In this paper, the armature resistance is considered for the optimum field-weakening control.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.937-939
• /
• 2000

The preventive structure of field lead connector's V-notch on synchronous generator has been developed. The preventive structure of field lead, installed in the generator, prevent from V notch of field lead connector in rotor on daily start and stop (on-line). This development of study was performed at the Seoinchon combined cycle power plant on gas turbine generator. This preventive structure of field lead will be prevent from V-notch of field lead on synchronous generator's field.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.855-863
• /
• 2021

The purpose of this study is to suggest an improvement plan for the National Technical Qualification Practical Evaluation focusing on National Competency Standards. First, in order to strengthen practical techniques such as field abilities and expertise, practical evaluation methods were applied to the National Competency Standards, referring to a learning module focused on field performance. Second, an expert advisory committee in the field of organic agriculture was utilized to compare, analyze, and match the competency unit and competency unit elements of the National Competency Standards with the national technical qualification examination standards in field of organic agriculture. In addition, in order to identify work in progress in the industrial field, share professional practice skills, and analyze facilities and equipment, we visited an organic agriculture industry site. Through this, a practical evaluation exam was developed. Subsequently, in order to confirm the adequacy of the developed exam, the pilot test assessment was conducted for those majoring in organic agriculture. Finally, as a feasibility study, a survey was conducted. Based on the results, greater technical job competency in the field of organic agriculture will contribute to strengthening knowledge in this field by suggesting an improvement plan for the national technical qualifications practical evaluation method in the field of organic agriculture.