• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.1
• /
• pp.59-63
• /
• 2000

For the Mo-tip field emitter array, the method by which the geometrical structure of the gate insulator wall could be modified in order to improve field emission properties(turn-on voltage and gate leakage current). The device having a gate insulator of complex shape, which means the combined geometrical structure with round shape made by wet etching and vertical shape made by dry etching processes, was fabricated and the field emission properties of the three kinds of devices were compared. As a result, the electric field applied to tip apex could be increased and gate leakage current could be decreased by employing the gate insulator having geometrical wall structure of mixed shape. Finally, the obtained empirical results were analyzed by simulation of electric field distribution at/near the tip apex and gate insulator using SNU-FEAT simulator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1028-1031
• /
• 2002

Ga-based semiconductor nanowires (GaN, GaP) were synthesized by the reaction of Ga metal and GaN/GaP powder with a $NH_3/Ar$ gas using thermal chemical vapor deposition. The field emission and emission stability under oxygen and argon environments were investigated. Field emission energy distributions of electrons from these nanowires revealed that field emission mechanism of the semiconductor nanowires were different from carbon nanotubes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.146-149
• /
• 2006

We developed new FED cathode film material that has catalysis function for graphite nano fiber. Using the cathode film with catalyst, we can simplify the FED process. It is composed of Cr, Fe-Ni catalyst. Fabricating FED panel with the film, we confirmed good emission performance of the panel.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.63-69
• /
• 2000

In order to improve both the level and the stability of electron emission, Mo and Co silicides were formed from Mo mono-layer and Ti/Co bi-layers on single crystal silicon field emitter arrays (FEAs), respectively. Using the slope of Fowler-Nordheim curve and tip radius measured from scanning electron microscopy (SEM), the effective work function of Mo and Co silicide FEAs were calculated to be 3.13 eV and 2.56 eV, respectively. Compared with silicon field emitters, Mo and Co silicide exhibited 10 and 34 times higher maximum emission current, 10 V and 46 V higher device failure voltage, and 6.1 and 4.8 times lower current fluctuation, respectively. Moreover, the emission currents of the silicide FEAs depending on vacuum level were almost the same in the range of $10^{-9}{\sim}10^{-6}$ torr. This result shows that silicide is robust in terms of anode current degradation due to the absorption of air molecules.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1096-1099
• /
• 2005

Multi-walled carbon nanotubes (CNTs) grown on catalyst dots by thermal chemical vapor deposition were vertically aligned with a high population density. Such densely populated CNTs showed poor field emission characteristics due to the electrical screening effect. We reduced the number density of CNTs using an adhesive tape treatment. For dotpatterned CNTs, the tape treatment decreased the CNT density by three orders of magnitude, drastically improved the turn-on electric field from 4.8 to $1.8V/{\mu}m$, and changed the emission image from spotty to uniform luminescence. We also report long-term emission stability of dot-patterned CNTs by measuring the emission currents with time at different duty ratios.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1081-1086
• /
• 2005

Dynamic behavior of carbon nanotubes (CNTs) in an electric field is directly observed by in-situ transmission electron microscopy (TEM). The CNT field emitters examined by in-situ TEM are multiwalled, double-walled and single walled CNTs. Threshold fields for electron emission and sustainable emission currents depending on the structure of CNTs are presented, and degradation mechanism of the CNT field emitters is discussed. In addition to the microscopy studies on individual CNTs, our recent development in surface treatment of CNT layers grown by chemical vapor deposition, which brings about high density of emission current and high uniformity, is also presented.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1827-1831
• /
• 2003

Field emission of carbon nanotubes (CNTs) fabricated by disproportionation of CO has been studied. CNTs fabricated on well-ordered Co nanowire arrays formed on the porous anodic aluminum oxide templates were well graphitized, uniform in diameter and aligned vertically with respect to the plane of the template, and showed a good field emission property. Very uniform emissions were observed from the CNTs fabricated at relatively low temperature, $500-600^{\circ}C$. Low fabrication temperature such as $500^{\circ}C$ could make it possible to fabricate CNTs on soda lime glass, a low-cost substrate, for display panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.786-789
• /
• 2007

Fabrication of dot-patterned carbon nanotube (CNT) emitters with excellent field emission properties using photo-sensitive CNT paste is described. The photosensitive CNT paste showed good photopatternability, which led us to easily form $10-{\mu}m-diameter$ dot arrays. We presented a parametric study on formulating the photo-sensitive paste and their resultant field emission characteristics.

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.743-745
• /
• 2006

The luminescence properties of $Sr_{1-x}Ba_xTiO_3:Pr$, Al red phosphor for Field Emission Displays (FEDs) have been investigated in powders prepared though solid-state reactions. $Sr_{1-x}Ba_xTiO_3:Pr$, Al red phosphors indicate a higher luminescent intensity, and have been found to have potential for field emission displays. The addition of Ba increased the luminescence intensity at 617 nm by up to 30%. Ba ions are effective in producing the energy transfers from host-to-activator in 4f-5d transitions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.392-392
• /
• 2011

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission.$^{1,2}$ CNT yarns have demonstrated its potential as excellent field emitters.$^3$ Extensive simulations were carried out in designing a CNT yarn-based cathode assembly. The focal spot size dependence on the anode surface of the geometric parameters such as axial distance of the electrostatic focus lens from the cathode and the applied bias voltages at the cathode, grid mesh and electrostatic focus lens were studied. The detailed computer simulations using Opera 3D electromagnetic software$^4$ had revealed that a remarkable size of focal spot under a focusing lens triode type set-up design was achieved. The result of this optimization simulation would then be applied for the construction of the CNT yarn based micro-focus x-ray tube with its field emission characteristics evaluated.