• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.190-195
• /
• 2007

A novel optical coupling filter with finite-thickness metal-strip gratings printed on optical planar dielectric slabs is proposed, and Bragg conditions of the device are rigorously evaluated by using Modal Transmission-Line Theory (MTLT). The numerical results reveal that the guiding structures have filtering properties due to a leaky-wave stop-band while conventional DFB guiding structures consisted of dielectric gratings depend on a feedback-wave stop-band. Consequently, it shows that the optical coupling titter dependent on the leaky-wave filtering characteristics can be compounded of such optical devices as LD and optical fiber.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.76-78
• /
• 2001

먹는 물에 존재하는 크립토스포리디움 및 지아디아등 기존의 표준 정수처리 공정에 의해 제거가 용이치 않은 원생동물 둥을 채집할 수 있는 미생물 검출 캡슐을 개발하였다. 본 장치의 여과필터는 고분자물질을 소재로 한 중공사 형태(Hollow Fiber Membrane)로 유효여과면적을 크게하였고, Pore size는 0.1㎛이다. 채집캡슐은 탁도에 따른 투과수량은 일차의 상관관계를 나타내며, 시간당 20ℓ를 투과시킬 때 탁도 7.0 NTU까지 가능함을 확인 할 수 있었다. 일차 시제품은 89.6-94.6%의 크립토스포리디움 및 72.6-78.6%의 지아디아 포낭을 회수하였고, 이차 시제품은 92.5-93.7%의 크립토스포리디움 및 81.3-88.2%의 지아디아 포낭을 회수하는 것으로 나타났다. 동일한 조건에서 외국제품은 84.0%의 크립토스포리디움 및 66.7%의 지아디아 포낭을 회수하는 것으로 나타났다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2303-2305
• /
• 2005

현재 광통신 분야는 보다 많은 정보를 동시에 전송하기 위해 다양한 다중화 방식들을 요구 받고 있다. 광섬유 Bragg 격자 소자를 이용한 모든 광 분기/결합 장치는 분기/결합할 수 있는 신호가 광섬유 격자 소자의 Bragg파장에 의해 정해지므로 하나의 광섬유 격자 소자는 고정된 한 채널만을 분기, 결합할 수 있다는 단점을 지니고 있다. 그러나 광섬유 격자에 온도와 스트레인(strain) 같은 외부 물리량을 가하게 되면 광섬유 격자의 주기가 변하게 되어 반사파장이 고정되지 않고 파장을 가변 할 수 있는 장점을 가지게 된다. 이에 본 논문에서는 광섬유 격자 소자에 가해진 온도, 스트레인에 의해 Bragg파장이 변화하는 성질을 이용하여 파장 가변형 Bragg 격자를 제작 및 실험을 통하여 전광필터 특성에 대하여 제시하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1390-1395
• /
• 2006

In this paper, we propose an optical add-drop multiplexer(OADM) for dense-WDM (DWDM) which consists of the fiber Bragg grating(FBG) filter and investigate the temperature characteristics of it. To resolve the characteristics, we find and analyze numerically its temperature response, and fabricate an OADM and measure its output spectrum. From the obtained results, we khow that the center wavelength of output spectrum shifts approximately 0.01230$nm/^{\circ}C$ within a temperature range $-30^{\circ}C{\sim}90^{\circ}C$.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.89-102
• /
• 2019

Collagen can be used in building artificial skin replacements for treatment of burns and towards the reconstruction of bone as well as researching cell behavior and cellular interaction. The strength of collagen in connective tissue rests on the characteristics of collagen fibers. 3D confocal imaging of collagen fibers enables the characterization of their spatial distribution as related to their function. However, the image stacks acquired with confocal laser-scanning microscope does not clearly show the collagen architecture in 3D. Therefore, we developed a new method to reconstruct, visualize and characterize collagen fibers from fluorescence confocal images. First, we exploit the tensor voting framework to extract sparse reliable information about collagen structure in a 3D image and therefore denoise and filter the acquired image stack. We then propose to segment the collagen fibers by defining an energy term based on the Hessian matrix. This energy term is minimized by a min cut-max flow algorithm that allows adaptive regularization. We demonstrate the efficacy of our methods by visualizing reconstructed collagen from specific 3D image stack.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.222-232
• /
• 2006

Objectives: The objective of this study was to propose the total isocyanate analytical method which involves derivation of 2,4-toluene diisocyanate(2,4-TDI), 2,6-toluene diisocyanate(2,6-TDI), 4,4'-methylenediphenyl diisocyanate(4,4'-MDI) and 1,6-hexamethylene diisocyanate(1,6-HDI) using 2-chlorobenzyl alcohol(2-CBA) or 2,4-dichlorobenzyl alcohol(2,4-DCBA), and analyzing of hydrolysate of the synthesized urethane with the gas chromatography(GC)/flame ionization detector(FID), GC/pulsed discharge ionization detector-electron capture detector(PD-ECD) and GC/mass selective detector(MSD). Methods: Urethanes were synthesized by reacting 2,4-TDI, 2,6-TDI, 4,4'-MDI and 1,6-HDI to 2-CBA or 2,4-DCBA. Urethanes was verified by TLC, HPLC/UVD and GC/MSD. For field application, the most suitable condition that 2-CBA coated in glass fiber filter removed completely and urethanes were not removed was searched. 2-CBA generated from hydrolysis of urethanes according to hydrolysis conditions. Diisocyanates were collected on field air and analyzed. Results: Urethanes which were white and solid phase synthesized by reacting 2,4-TDI, 2,6-TDI, 4,4'-MDI, 1,6-HDI and 2-CBA or 2,4-DCBA. And urethanes were verified by TLC, HPLC/UVD and GC/MSD. The most suitable conditions to remove 2-CBA coated in glass fiber filter were $87^{\circ}C$ and 20 mmHg and urethanes were not removed under same condition. Hydrolysis yields of urethanes were 99 % to 111 %. 2-CBA, the hydrolysate of urethanes was analyzed by GC/FID, GC/PD-ECD and GC/MSD. Conclusions: Simultaneous analysis of 2,4-TDI, 2,6-TDI, 4,4'-MDI and 1,6-HDI deriving with 2-CBA and 2,4-DCBA, along with a total isocyanate analysis, was feasible with GC/FID, GC/PD-ECD and GC/MSD. This result will be a guide of further study on total isocyanate analysis.

• 전자공학회논문지 IE
• /
• v.46 no.3
• /
• pp.6-11
• /
• 2009

In this paper, manufactured composite nanofiber by electrospinning that make spinning solvent according to weight of PAN/PVdF. PVdF content of composite nanofiber decreases, diameter of fiber decreased. Result that measure contact angle to confirm hydrophile property of PAN/PVdF composite nanofiber, PVdF content increases, could confirm that contact angle with water increases. After leave filter measurement sample for 25 hours in temperature of $40^{\circ}C$, humidity of 85%, result PAN/PVdF composite nanofiber that estimate efficiency could confirm that display performance of HEPA more than 99.95% and ULPA more than 99.999%. And fiber diameter is small, could confirm that filter performance increases. Tensile strength of bulk of PAN/PVdF composite nanofiber was 5-8MPa, expansion 100-300%. And strength and expansion could know that increase according as PVdF's content increases. Tensile strength was 3-8MPa degree after annealing PAN/PVdF composite nanofiber during 2 hours in 120t. Tensile strength was no change almost by annealing, and expansion could know that decrease.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.22-27
• /
• 2017

Time-encoded near-infrared spectroscopy (NIRS) system is proposed, based on a near-infrared (NIR) swept laser source, for comparison to the conventional NIRS method using a detector-type spectrometer. The cavity of the NIR swept laser source consists of a semiconductor optical amplifier (SOA) with a gain region around 800 nm, and several fiber-optic components. To change the output wavelength in time using an applied electric radio-frequency signal, an acousto-optic tunable filter (AOTF) is introduced in the fiber ring cavity configuration. To demonstrate the feasibility of an NIR swept laser source for NIRS imaging, the spectroscopic comparison of two kinds of absorbance-measuring systems a detector-type spectrometer using a white light source, and a source-type spectrometer using an NIR swept laser is successfully performed with an NIR-absorbing dye.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.587-591
• /
• 2009

Lithium salt have been used mainly as electrolyte of thermal battery for electricity storage. Recently, The 3phase lithium salt(LiCl-LiF-LiBr) is tried to use as electrolyte of thermal battery for high electric power. It is reported that LiCl-LiF-LiBr salt have high ion mobility due to its high lithium ion concentration. Solid lithium salt is melt to liquid state at above $500{^{\circ}C}$. The lithium ion is easily reacted with support materials. Because the melted lithium ion has small ion size and high ion mobility. For the increasing mechanical strength of electrolyte pellet, the research was started to apply ceramic filter to support of electrolyte. In this study, authors used SiOC web and glass fiber filter as ceramic mat for support of electrolyte and impregnated LiCl-LiF-LiBr salt into ceramic mat at above $500{^{\circ}C}$. The fabricated electrolyte using ceramic mat was washed with distilled water for removing lithium salt on ceramic mat. The washed ceramic mat was observed for lithium ion reaction behavior with XRD, SEM-EDS and so on.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.975-983
• /
• 2008

In view of previous investigations that the outermost zone of porous media displays the most vigorous removal of organic contaminant, a novel filtration apparatus of cylinder-shaped porous material (polyester fiber) was applied to the Samcheonji reservoir in Gyeongsan to assess its ability to remove contaminants from reservoir water. The apparent mechanism of purification is that organic pollutant dispersed in the water is collected by the matrix to be degraded by microbes in due course. Data obtained from the experiment appear promising; 19$\sim$27% decrease in COD$_{Cr}$, 37$\sim$43% reduction in COD$_{Mn}$, BOD$_5$ diminution between 67$\sim$81%, 93% decrease in turbidity, and 99% removal of Suspended Solids. The results suggest that this device may be a valuable supplementary means to ameliorate the quality of reservoir water.