• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.7
• /
• pp.24-30
• /
• 2000

In this paper, we proposed an fiber-optic transceivers based on the analog optical transmission techniques of incorporating the SCM (subcarrier multiplexing) and WDM (wavelength-division multiplexing ) method, which can be used to transmission of IMT-2000 and PCS wireless frequency band and analyzed overall those parameters related with fabrication. Especially in the impedance matching network between RF signal and LD, we proposed the method of deriving optimal performance using simulation techniques. In the frequency band of 1.7GHz∼2.25GHz, experimental data for the gain flatness and the noise floor of the optical link were also presented $\pm$1.5dB and -130dBm respectively when the link Rain was 0dB.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.19-21
• /
• 2007

디지털용 Uncooled DFB 레이저 다이오드를 이용하여 광대역 아날로그 피드포워드 광송신기를 제작하였다. 광송신기의 상호변조왜곡 성분 및 잡음성분을 제거하기 위해 광 피드포워드 보상기법을 사용하였으며, 다중서비스를 위해 $2.05{\sim}2.60$ GHz(550 MHz)에서 상호 변조왜곡 성분이 10 dB 이상 억제되었고, 상대강도잡음은 1.5 dB 이상 억제되었다. 2.3 GHz 에서 3 차 상호변조왜곡성분이 21.3 dB, SFDR 이 7.11 dB 향상된 결과를 얻었다. 또한 단일 모드 광섬유 전송 실험을 통해 전송길이에 따른 3 차 상호변호 왜곡성분의 크기 변화를 확인하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.15-18
• /
• 2007

RoF 링크 시스템을 적용한 무선 근거리 통신망(IEEE 802.11b/g)의 중심 주파수 대역인 2.4 GHz에서 저가의 Febry-Perot 레이저 다이오드를 이용한 피드포워드 광송신기를 제작 및 측정 하였다. 제작된 피드포워드 광송신기의 측정 결과는 2.4 GHz에서 주신호의 간격이 10 MHz이고 크기가 -4 dBm인 입력 신호에서 피드포워드 보상기법을 적용하기 전보다 3차 상호 변조 왜곡 신호가 22.9 dB 개선되었다. 제작된 피드포워드 광송신기의 전자소자의 사양을 바탕으로 송신기 집적을 위한 RFIC회로(감쇄기, 증폭기)를 0.18 ${\mu}m$ 공정을 이용하여 설계하였다.

• IE interfaces
• /
• v.9 no.3
• /
• pp.72-80
• /
• 1996

As the fiber optic technology is rapidly being deployed in telecommunication networks, particular emphasis is placed on the survivability in designing networks. Most of the survivable network design models proposed to date have connectivity constraints, which cannot precisely define a network topology owing to the multiplicity of feasible ones. In this paper, we propose a k-link survivable network design model incorporating traffic-based survivability constraints which restrict the lost traffic due to a network failure under a prescribed level. Our model is shown to include the existing connectivity models as special cases. Then we present its integer programming formulation, analyze the structural properties, and develop a heuristic for obtaining low cost survivable networks.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.303-308
• /
• 2008

Directly modulated fiber-optic links generally suffer higher link loss and larger signal distortion than externally modulated links. These result from the electron-photon conversion loss and laser modulation dynamics. As a method to overcome the drawbacks, we have experimentally demonstrated the RF performance of directly modulated, ultra-strong injection-locked gain-lever distributed Bragg reflector (DBR) lasers. The free-running DBR lasers exhibit an improved amplitude modulation efficiency of 12.4 dB under gain-lever modulation at the expense of linearity. By combining gain-lever modulation with ultra-strong optical injection locking, we can gain the benefits of both improved modulation efficiency from the gain-lever effect, plus improved linearity from injection locking. Using an injection ratio of R=11 dB, a 23.4-dB improvement in amplitude response and an 18-dB improvement in spurious-free dynamic range have been achieved.

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.14-20
• /
• 2007

The Korean Military Satellite Communication System (KMILSATCOM) is composed of military payload of KOREASAT 5 and military satellite terminals. The military satellite terminals communicate with each other in satellite service area. The satellite terminal management system is developed for centralized management of satellite terminals and communications link. The satellite terminal management system dose not use terrestrial networks (i.e. Fiber optic, Microwave) for management because the KMILSATCOM is system for emergency (i.e. war time) and the satellite terminals has to move to operational area, so the management link must use satellite link. The management link is composed of 1 to N communication scheme for one manager and multiple terminals. This paper describes the satellite terminal management protocol architecture and the performance of the protocol of the KMILSATCOM system.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.198-203
• /
• 2004

This paper describes a real-time control architecture for DUSAUV (Dual Use Semi-Autonomous Underwater Vehicle), which has been developed at Korea Research Institute of Ships & Ocean Engineering (KRISO), KORDI, for being a test-bed oj development of technologies for underwater navigation and manipulator operation. DUSAUV has three built-in computers, seven thrusters for 6 degree of freedom motion control, one 4-function electric manipulator, one pan/tilt unit for camera, one ballasting motor, built-in power source, and various sensors such as IMU, DVL, sonar, and so on. A supervisor control system for GUI and manipulator operation is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers of vehicle for real-time control purpose, while MicroSoft OS product is ported on the supervisor system for GUI programming convenience. A hierarchical control architecture which consist of three layers (application layer, real-time layer, and physical layer) has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in a basin of KRISO is also provided.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.303-312
• /
• 2006

This paper proposes the architecture and protocol of a data communication network for the safety system in nuclear power plants. First, we establish four design criteria with respect to determinability, reliability, separation and isolation, and verification/validation. Next we construct the architecture of the safety network for the following systems: PPS (Plant Protection System), ESF-CCS (Engineered Safety Features-Component Control System) and CPCS (Core Protection Calculator System). The safety network consists of 12 sub-networks and takes the form of a hierarchical star. Among 163 communication nodes are about 1600 origin-destination (OD) pairs created on their traffic demands. The OD pairs are allowed to exchange data only during the pre-assigned time slots. Finally, the communication protocol is designed in consideration of design factors for the safety network. The design factors include a network topology of star, fiber-optic transmission media, synchronous data transfer mode, point-to-point link configuration, and a periodic transmission schedule etc. The resulting protocol is the modification of IEEE 802.15.4 (LR-WPAN) MAC combined with IEEE 802.3 (Fast Ethernet) PHY. The MAC layer of IEEE 802.15.4 is simplified by eliminating some unnecessary (unctions. Most importantly, the optional TDMA-like scheme called the guaranteed time slot (GTS) is changed to be mandatory to guarantee the periodic data transfer. The proposed protocol is formally specified using the SDL. By performing simulations and validations using Telelogic Tau SDL Suite, we find that the proposed safety protocol fits well with the characteristics and the requirements of the safety system in nuclear power plants.