• Title/Summary/Keyword: Ferrous

Search Result 823, Processing Time 0.028 seconds

A Case Study of Monitored Natural Attenuation at the Petroleum Hydrocarbon Contaminated Site : II. Evaluation of Natural Attenuation by Groundwater Monitoring (유류오염부지에서 자연저감기법 적용 사례연구 II. 지하수모니터링에 의한 자연저감 평가)

  • Yun Jeong Ki;Lee Min Hyo;Lee Suk Young;Noh Hoe Jung;Kim Moon Soo;Lee Kang Kun;Yang Chang Sool
    • Journal of Soil and Groundwater Environment
    • /
    • v.9 no.3
    • /
    • pp.38-48
    • /
    • 2004
  • Natural attenuation of petroleum hydrocarbon was investigated at an industrial complex about 45 Km away from Seoul. The three-years monitoring results indicated that the concentrations of DO, nitrate, and sulfate in the contaminated area were significantly lower than the background monitoring groundwater under the non-contaminated area. The results also showed a higher ferrous iron concentration, a lower redox potential, and a higher (neutral) pH in the contaminated groundwater, suggesting that biodegradation of TEX(Toluene, Ethylbenzene, Xylene) is the major on-going process in the contaminated area. Groundwater in the contaminated area is anaerobic, and sulfate reduction is the dominant terminal electron accepting process in the area. The total attenuation rate was about 0.0017∼0.0224day$^{-1}$ and the estimated first-order degradation rate constant(λ) was 0.0008∼0.0106day$^{-1}$ . However, the reduction of TEX concentration in the groundwater was resulted from not only biodegradation but also dilution and reaeration through recharge of uncotaminated surface and groundwater. The natural attenuation was, therefore, found to be an effective, on-going remedial process at the site.

Studies on the Acid Sulphate Soils - Effect of the Rice Plant Growth by Amounts of Lime Application on No-Percolation and Percolation - (산성(酸性) 유산염(硫酸鹽) 토양(土壤)에 관(關)한 연구(硏究) - 투수(透水)에 의(依)한 석회(石灰) 시용량(施用量)이 수도생육(水稻生育)에 미치는 영향(影響) -)

  • Ha, H.S.
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.3 no.1
    • /
    • pp.29-34
    • /
    • 1970
  • This experiment was conducted to investigate the influence of amounts of lime dressed on the growth of rice by the treatment of percolation and nonpercolation in the acid sulphate soil. And also analysis of soil chemical components after treatment was carried out. The results obtained were summarized as follows: 1. In the initial stage of growth, number of tillers and plant length showed no distinct differences between the treatments of percolation and nonpercolation, but after August the effect of lime appeared and the percolation treatment was more effective than the nonpercolation. 2. Lime dressing affected good influence on the panicles, grain per panicles and the rate of grain formation, and the treatment of percolation showed better results than nonpercolation. 3. If the yield of rough rice in the control (nonpercolation and lime dressing) was 100, it was 194 in the treatment of nonpercolation 12me/100gr of lime dressed, 268 in the treatment of percolation-4me/100gr of lime and 315 in the 8me/100gr-percolation. 4. Lime dressing affected good influence on the control of Helminthosporium leaf spots. 5. In the case of lime dressing, amounts of available phosphate and soluble silicon dioxide were increased, but ferrous ion ($Fe^{{+}{+}}$) were decreased.

  • PDF

One-dimensional XRD-Pattern Calculations of Clay Minerals: I. Dioctahedral and Trioctahedral Fe-rich Smectites (粘土鑛物의 一次元的 X-線 回折圖形의 計算: I. Dioctahedral 과 Trioctahedral Fe-rich 스멕타이트)

  • Ahn, Jung-Ho
    • Journal of the Mineralogical Society of Korea
    • /
    • v.4 no.1
    • /
    • pp.11-21
    • /
    • 1991
  • XRD patterns of biedellite-nontronite and saponite-iron saponite series were investigated using one-dimensional pattern simulation method. Ethylene-glycolate smectites show stronger 002 and 003 reflections than hydrated specimens do. The intensities of the 002 and 003 reflections change systematically as a function of Fe enrichment in both types of smectites. The intensity ratio of 002/003 increases with increasing. Fe in both dioctahedral to the higher scattering factor of Fe than those of Al and Mg, and the scattering power of various smectites can be compared quantitatively by calculating the scattering factors of octahedral cations. Interlayer cations cause less effect on XRD profile than octahedral cations as Fe do. Although 001 reflections provide informations about the overall scattering power of the octahedral sheet, some ferrous dioctahedtal smectite cannot be distinguished unambiguously from trioctahedral smectites on the basis of XRD profile. Simulation showed that heterogeneous smectites exhibit 001 intensity distribution that is almost identical to that of homogeneous smectites having the average composition of heterogeneous ones. The broadening of 001 reflections may not be useful in evaluating the degree of heterogeneity of smectite unless other factors affecting the broadening are well known.

  • PDF

The Relationship Between Intestinal Iron Absorption and Hepatic Parenchymal Cell Damage (간실질세포(肝實質細胞)의 손상(損傷)이 철흡수(鐵吸收)에 미치는 영향(影響)에 관(關)한 실험적(實驗的) 연구(硏究))

  • Kim, Mok-Hyun;Hahn, Shim-Suck
    • The Korean Journal of Nuclear Medicine
    • /
    • v.5 no.2
    • /
    • pp.19-40
    • /
    • 1971
  • Since the iron balance is maintained by regulated intestinal absorption rather than regulated excretion, there have been many reports concerning the factors which may influence the intestinal iron absorption. As the liver is the largest iron storage organ of the body, any hepatocellular damage may result in disturbances in iron metabolism, e,g., frequent co-existence of hemochromatosis and liver cirrhosis, or elevated serum iron level and increased iron absorption rate in patients with infectious hepatitis or cirrhosis. In one effort to demonstrate the influence of hepatocellular damage on intestinal iron absortion, the iron absorption rate was measured in the rabbits whose livers were injured by a single subcutaneous injection of carbon tetrachloride (doses ranging from 0.15 to 0.5cc per kg of body weight) or by a single irradiation of 2,000 to 16,000 rads with $^{60}Co$ on the liver locally. A single oral dose of $1{\mu}Ci\;of\;^{59}Fe$-citrate with 0.5mg of ferrous citrate was fed in the fasting state, 24 hours after hepatic damage had been induced, without any reducing or chelating agents, and stool was collected for one week thereafter. Serum iron levels, together with conventional liver function tests, were measured at 24, 48, 72, 120 and 168 hours after liver damage had been induced. All animals were sacrificed upon the completing of the one week's test period and tissue specimens were prepared for H-E and Gomori's iron stain. Following are the results. 1. Normal iron absorption rate of the rabbit was $41.72{\pm}3.61%$ when 0.5mg of iron was given in the fasting state, as measured by subtracting the amount recovered in stool collected for 7 days from the amount given. The test period of 7 days is adequate, for only 1% of the iron given was excreted thereafter. 2. The intestinal iron absorption rate and serum iron level were significantly increased when the animal was poisoned by a single subcutaneous injection of 0.15cc. per kg. of body weight of carbon tetrachloride or more, or the liver was irradiated with a single dose of 12,000 rads or more. The results of liver function tests which were done simultaneously remained within normal limit except SGOT and SGPT which were somewhat increased. 3. In each case, there has been good correlation between the extent of liver cell damage and degree of increased iron absorption rate or serum iron level. 4. The method of liver damage appeared to make no obvious difference in the pattern of iron deposit in liver. This may be partly due to the fact that tissue specimens were obtained too late, for by this time the elevated serum iron level had returned within normal range and the pathological changes were almost healed. 5. The possible factors and relationship between intestinal iron absorption and hepatic parenchymal cell damage has been discussed.

  • PDF

Flavonoid Content and Antioxidant Activities of Gardenia jasminoides Ellis Seed Extracts Produced by Ethyl Acetate, Distilled Water and Methanol (치자(Gardenia jasminoides Ellis) 씨 에틸 아세테이트, 물 및 메탄올 추출물의 플라보노이드 함량 및 항산화 활성)

  • Jin, Dong-Hyeok;Oh, Da-Young;Kang, Dong-Soo;Lee, Young-Geun;Kim, Han-Soo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.34 no.4
    • /
    • pp.1094-1103
    • /
    • 2017
  • The purpose of this study was to measure the bioactivity and antioxidant activity of seed from Gardenia jasminoides Ellis fructus (GJE). We determined tannin content ($1.517{\pm}0.003mg\;CE/g$, mg of catechin equivalents). The extraction yields of the GJE seed solvent were distilled water (DW) 36.61%, 70% methanol 30.10% and ethyl acetate (EA) 20.40%. The antioxidant activities of the extracts were significantly increased (0.2, 0.4, 0.6 mg/mL). Flavonoid contents (mg QE/g, mg of quercetin equivalents) were observed in the order of 70% methanol (0.799), DW (0.565) and EA (0.117). Antioxidant activities (DPPH, OH, ferrous ion-chelating capacity) were similar to the flavonoid content of each solvent. But ABTS scavenging activity and SOD like ability of DW extract were higher than 70% methanol extract. Comparing the yield and the antioxidant activity of each solvent of GJE seed, it seems to be preferable to use DW and 70% methanol solvent for extraction. As a result of this experiment, it has high antioxidant activity and physiological activity, which is expected to be highly valuable as a functional food and a natural antioxidant.

Enhancement of Thermoelectric Properties in Cold Pressed Nickel Doped Bismuth Sulfide Compounds

  • Fitriani, Fitriani;Said, Suhana Mohd;Rozali, Shaifulazuar;Salleh, Mohd Faiz Mohd;Sabri, Mohd Faizul Mohd;Bui, Duc Long;Nakayama, Tadachika;Raihan, Ovik;Hasnan, Megat Muhammad Ikhsan Megat;Bashir, Mohamed Bashir Ali;Kamal, Farhan
    • Electronic Materials Letters
    • /
    • v.14 no.6
    • /
    • pp.689-699
    • /
    • 2018
  • Nanostructured Ni doped $Bi_2S_3$ ($Bi_{2-x}Ni_xS_3$, $0{\leq}x{\leq}0.07$) is explored as a candidate for telluride free thermoelectric material, through a combination process of mechanical alloying with subsequent consolidation by cold pressing followed with a sintering process. The cold pressing method was found to impact the thermoelectric properties in two ways: (1) introduction of the dopant atom in the interstitial sites of the crystal lattice which results in an increase in carrier concentration, and (2) introduction of a porous structure which reduces the thermal conductivity. The electrical resistivity of $Bi_2S_3$ was decreased by adding Ni atoms, which shows a minimum value of $2.35{\times}10^{-3}{\Omega}m$ at $300^{\circ}C$ for $Bi_{1.99}Ni_{0.01}S_3$ sample. The presence of porous structures gives a significant effect on reduction of thermal conductivity, by a reduction of ~ 59.6% compared to a high density $Bi_2S_3$. The thermal conductivity of $Bi_{2-x}Ni_xS_3$ ranges from 0.31 to 0.52 W/m K in the temperature range of $27^{\circ}C$ (RT) to $300^{\circ}C$ with the lowest ${\kappa}$ values of $Bi_2S_3$ compared to the previous works. A maximum ZT value of 0.13 at $300^{\circ}C$ was achieved for $Bi_{1.99}Ni_{0.01}S_3$ sample, which is about 2.6 times higher than (0.05) of $Bi_2S_3$ sample. This work show an optimization pathway to improve thermoelectric performance of $Bi_2S_3$ through Ni doping and introduction of porosity.

Quality and Antioxidant Characteristics of Granule Tea Prepared with Sea Tangle (Laminaria japonica) and Sea Mustard (Undaria pinnatifida) Powder as Affected by Extraction Method (추출방법을 달리한 미역 및 다시마 과립차의 품질 및 항산화 특성)

  • Kwon, Yu-Ri;Youn, Kwang-Sup
    • Food Science and Preservation
    • /
    • v.19 no.4
    • /
    • pp.525-531
    • /
    • 2012
  • This study was conducted to evaluate the quality and anti-oxidant characteristics of different granule tea variants (WSMGT: granule tea prepared from sea mustard hot water extract; ASMGT: granule tea prepared from sea mustard autoclave extract; WSTGT: granule tea prepared from sea tangle hot water extract; and ASTGT: granule tea prepared from sea tangle autoclave extract) from sea tangle and sea mustard powder. The Color of WSTGT showed the highest $L^*$, $b^*$ values, and the lowest $a^*$ value. The water absorption binding agents in ASMGT were higher than those in WSMGT, WSTGT. and ASTGT. Binding agents on water absorption in ASMGT were higher than those of WSMGT, WSTGT, and ASTGT. The alginic acid content of ASMGT was highest. The total polyphenol and total flavonoid contents of ASMGT and ASTGT were highest. The electron donating ability and ferrous ion chelating activity in WSTGT greatly increased compared to those in the other granules tea variants. These results suggest that pressure extraction can be used in functional foods.

Antimicrobial activity and protective effect of Geranium thunbergii against oxidative DNA damage via antioxidant effect (현초의 항산화 활성에 의한 산화적 DNA 손상 보호효과 및 항균활성)

  • Kwon, Tae-Hyung;Lee, Su-Jin;Park, Jae-Ho;Kim, Taewan;Park, Jung-Ja;Park, Nyun-Ho
    • Food Science and Preservation
    • /
    • v.24 no.3
    • /
    • pp.325-333
    • /
    • 2017
  • This study aimed to investigate the various biological activities of Geranium thunbergii such as antimicrobial activity and protective effect against oxidative damage. To evaluate its antioxidant and antimicrobial activities, we first performed methanol extraction; this methanol extract was further partitioned using various solvents. And then, its antioxidant activity was measured using various assays including total phenolic content and protection against oxidative DNA damage, and antimicrobial activities were examined using minimum inhibiting concentration (MIC) test, and paper disc method. In addition, high-performance liquid chromatography was performed to analyze the major chemical components of ethyl acetate fraction. The G. thunbergii fraction with ethyl acetate exhibited higher antioxidant and antimicrobial activities than the other fractions. The results showed that G. thunbergii ethyl acetate fraction at $50{\mu}g/mL$ had strong DPPH and ABTS radical scavenging activities of 80.88% and 80.12%, respectively. In addition, the ethyl acetate fraction protected DNA from the oxidative damage induced by ferrous ion and hydroxyl radicals and showed high antimicrobial activity with diameter of inhibition zones ranging from 13.33 to 15.67 mm. High-performance liquid chromatography analysis revealed the major phenolic compounds of G. thunbergii to be ellagic acid and gallic acid. These results suggest that G. thunbergii might protect DNA against oxidative stress induced by reactive oxygen species and can be utilized as a natural source of antioxidant and antimicrobial agent in the food industry.

Effects of Physical and Chemical Treatments for Reduction of Staphylococcal Phages (황색포도상구균 박테리오파지의 저감화를 위한 물리화학적 처리 효과)

  • Baek, Da-Yun;Park, Jong-Hyun;Cho, Sung-Rae;Lee, Young-Duck
    • Journal of Food Hygiene and Safety
    • /
    • v.34 no.1
    • /
    • pp.106-114
    • /
    • 2019
  • The effect of physical and chemical treatments to reduce staphylococcal phages was investigated. To determine impact of physical treatment on viability of phages, two staphylococcal phages (SAP84 and SAP89) were treated with multiple heat ($55^{\circ}C$ and $60^{\circ}C$) and pH (pH4, 7, 10) conditions. Viability of SAP 84 was dramatically reduced at 60C and SAP 89 was completely inactivated at 60C within 25 min. Overall, the two phages were stable under all the pH conditions tested except for the SAP 89 at pH 10. Treatments, a 10% FAS (Ferrous Ammonium Sulfate) solution and various density of ethanol and sodium hypochlorite were used to reduce the two phages. SAP 84 was unstable in 50% and 70% ethanol. However, SAP 84 and SAP 89 showed high tolerance after exposure to 100 ppm of sodium hypochlorite which is known as an effective sterilizer. As soon as the two phages were treated with 10% FAS, which is used as a virucidal agent, they were inactivated and did not form any plaque. The result of this study provides additional evidence that staphylococcal phages can be controlled by various physicochemical treatments.

Mechanical Characteristics and Microstructures of Hypereutectic Al-17Si-5Fe Extruded Alloys Prepared by Rapid Solidification Process (급속응고법으로 제조한 과공정 Al-17Si-5Fe 합금 압출재의 미세조직 및 기계적 특성)

  • KIM, Tae-Jun;LEE, Se-dong;BECK, Ah-Ruem;KIM, Duck-Hyun;LIM, Su-Gun
    • Journal of Korea Foundry Society
    • /
    • v.39 no.2
    • /
    • pp.26-31
    • /
    • 2019
  • In this study, the mechanical characteristics and microstructure of hypereutectic Al-17Si-5Fe extruded alloys prepared by a rapid solidification process (RSP) were investigated. The hypereutectic Al alloy was fabricated by means of RSP and permanent casting. For RSP, the Al alloy melted at $920^{\circ}C$, cooling the specimens at a rate of $10^6^{\circ}C/s$ when the RSP was used, thus allowing the refining of primary Si particles more than when using permanent casting, at a rate of about 91%. We tested an extrusion RSP billet and a permanent-cast billet. Before the hot-extrusion process, heating to $450^{\circ}C$ took place for one hour. The samples were then hotextruded with a condition of extrusion ratio of 27 and a ram speed of 0.5 mm/s. Microstructural analyses of the extruded RSP method and the permanent casting method were carried out with OM and SEM-EDS mapping. The mechanical properties in both cases were evaluated by Vickers micro-hardness, wear resistance and tensile tests. It was found that when hypereutectic Al-17Si-5Fe alloys were fabricated by a rapid solidification method, it becomes possible to refine Si and intermetallic compounds. During the preparation of the hypereutectic Al-17Si-5Fe alloy by the rapid solidification method, the pressure of the melting crucible was low, and at faster drum speeds, smaller grain alloy flakes could be produced. Hot extrusion of the hypereutectic Al-17Si-5Fe alloy during the rapid solidification method required higher pressure levels than hot extrusion of the permanent mold-casted alloy. However, it was possible to produce an extruded material with a better surface than that of the hot extruded material processed by permanent mold casting.