• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.183-184
• /
• 2009

본 논문에서는 선박 탑재 전자기기들이 외부의 전원장해와 과도 전압에 의해 전자파 간섭과 오동작 하는 것을 방지하기 위해 EMC 필터를 설계 및 제작하였다. 먼저 인덕터의 경우 높은 투자율을 가진 Ni-Zn계열 페라이트 비드와 컨덴서의 경우 공진현상을 최대한 억제하기 위해 공진점이 없는 관통형 컨덴서를 이용하여 EMC 필터를 설계 제작하고, 그 특성을 평가하였다. 그 결과 0 kHz$\sim$1.5 GHz 광대역에서 $25{\sim}70$ dB의 우수한 감쇠특성을 얻을 수 있었으며, 과도전압의 경우, IEC 61000-4-4에서 규정하는 level 4에서 4 kV를 인가시 600 V로 과도전압이 감쇠되는 특성을 얻음으로써, 선박 탑재 전자기기들 간의 전자파 간섭을 억제할 수 있음을 확인하였다.

• 한국주조공학회지
• /
• 제43권2호
• /
• pp.55-63
• /
• 2023

Due to the importance of the surface on the final slab quality, it is essential to maintain a smooth segment roll surface that is in touch with the thin solid shell during solidification. In this paper, the surface of the used continuous casting guide roll was analyzed to realize the mechanism of its surface deterioration. Surface analysis has revealed severe corrosion at two distinct areas leading to deep roughness occurring on the guide roll. Firstly, the severe corrosion follows prior austenite grain boundary due to exposure with acidic environment. Also, in heat affected zone (HAZ) where two cladding beads overlap, more severe corrosion takes place. The overheat input results in local ferritization without full melting which increases retained δ-ferrite content almost 10 times higher than surrounding area. Corrosion was observed to happen at the δ-γ interface where Cr depletion takes place.

• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.53-60
• /
• 2009

Remarkable developments in the electric and electronic industry have given people's daily life much more convenience and abundance. However, in electrical communication, or electric and electronic fields, making electrical and electronic devices more functional, more integrated, and faster have put electromagnetic interference(EMI) into more complex forms, and lots of problems such as interruption, malfunction, or interference by noise between electrical communication systems occurs every day. In this research, the electromagnetic compatibility(EMC) filter in the high powered breaker was designed and fabricated as a counter measure. The filter attenuated noise more than 20${\sim}$50 dB in the range of 10 MHz${\sim}$1.5 GHz. And, when the electric fast transient(EFT) of 4 kV in the level 4 of IEC 61000-4-4 was induced, it was soon suppressed to 600 V.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.411-421
• /
• 2017

An approach based on a 2D lumped model is presented to quantify the voltage transfer gain (VTG) in power converter low power planes. The advantage of the modeling approach is the ease with which typical noise reduction devices such as decoupling capacitors or ferrite beads can be integrated into the model. This feature is enforced by a new modular approach based on effective matrix partitioning, which is presented in the paper. This partitioning is used to decouple power plane equations from external device impedance, which avoids the need for rewriting of a whole set of equation at every change. The model is quickly solved in the frequency domain, which is well suited for an automated layout optimization algorithm. Using frequency domain modeling also allows the integration of frequency-dependent devices such inductors and capacitors, which are required for realistic computation results. In order to check the precision of the modeling approach, VTGs for several layout configurations are computed and compared with experimental measurements based on scattering parameters.

• 한국주조공학회지
• /
• 제28권3호
• /
• pp.113-118
• /
• 2008

A new approach of producing martensitic structure for guide-roll materials was developed using centrifugal casting instead of classic overlay welding process. Centrifugal casting offered a simpler process, fewer defects and even microstructures. Especially in terms of thermal fatigue cracking which usually occurs in the HAZ of welding beads of used continuous caster guide roll materials made by overlay welding process. A typical tensile strength of 1,600 MPa was obtained by this process and was higher than typical tensile strength($800{\sim}1,200\;MPa$) with overlay welding technique. Tempering at $400{\sim}550^{\circ}C$ for 2 hrs was observed to have significant precipitate hardening effect which increases strength and elongation. Nitrogen content from the Cr-N input in the casting process was found to have positive contribution to decrease the volume fraction of ${\delta}$-ferrite which directly corresponds to increasing strength of the roll materials.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.139-142
• /
• 2009

전파통신의 급격한 발전에 따라 우리의 생활은 보다 편리하고 풍요로워졌다. 그러나 정밀 전기 전자 장치 및 제어 시스템 등이 경량화, 고속화, 소형화됨에 따라 외부의 EMI(전원장해)와 EFT(과도전압)에 의한 오동작, 인체에 미치는 영향 등의 많은 문제점을 야기 시키고 있다. 따라서 본 논문에서는 이에 대한 대책방법으로 10 MHz ~ 1.5 GHz에서 30 ~ 75 dB 이상의 노이즈 감쇠 특성과 IEC 61000-4-4의 level 4에서 4 kV의 과도전압을 인가시 600 V로 억제시키는 우수한 특성을 가진 대전력용 차단기 내의 EMC 필터를 설계 제작하였다.