• Agricultural and Biosystems Engineering
• /
• v.1 no.2
• /
• pp.95-99
• /
• 2000

Nondestructive methods such as ultrasonic and magnetic resonance imaging systems have many advantages but still much expensive. And they do not give exact color information and may miss some details. If it is allowed to destruct some biological objects to get interior and exterior informations, constructing 3D image form a series of slices sectional images gives more useful information with relatively low cost. In this paper, a PC based automatic 3D model generator was developed. The system was composed of three modules. The first module was the object handling and image acquisition module, which fed and sliced the object sequentially and maintains the paraffine cool to be in solid state and captures the sectional image consecutively. The second one was the system control and interface module, which controls actuators for feeding, slicing, and image capturing. And the last was the image processing and visualization module, which processed a series of acquired sectional images and generated 3D volumetric model. Handling module was composed of the gripper, which grasped and fed the object and the cutting device, which cuts the object by moving cutting edge forward and backward. sliced sectional images were acquired and saved in a form of bitmap file. 2D sectional image files were segmented from the background paraffine and utilized to generate the 3D model. Once 3-D model was constructed on the computer, user could manipulated it with various transformation methods such as translation, rotation, scaling including arbitrary sectional view.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.566-571
• /
• 2005

Process of screw-pumping system (SPS) was optimized for mass production of encapsulated bifidus. SPS entrapment device was composed of feeding component, with optimized nozzle size and length of 18G (0.91 cm) and 4 mm, respectively, screw pump, and 37-multi-nozzle. Screw component had five wing turns [radius (r)=26 to 15 mm] from top to bottom of axis at 78-degree angle from middle of the screw, and two wings were positioned at screw edge to push materials toward nozzle. For nozzle component, 37 nozzles were attached to 20-mm round plate. Air compressor was attached to SPS to increase productivity of encapsulated bifidus. This system could be operated with highly viscous (more than 300 cp) materials, and productivity was higher than $1128\;{\pm}\;30\;beads/min$. Viability of encapsulated bifidus was $5.45\;{\times}\;10^8\;cfu$/bead, which is superior to that of encapsulated bifidus produced by other methods ($2.51{\times}10^8\;cfu$/bead). Average diameter of produced beads was $2.048\;{\pm}\;0.003\;mm$. Survival rate of SPS-produced encapsulated bifidus was 90% for Simulator of the Human Intestinal Microbial Ecosystem test and 88% in fermented milk (for 14 days). These results show SPS is effective for use in development of economical system for mass production of viable encapsulated bifidus.

• Journal of Biosystems Engineering
• /
• v.19 no.3
• /
• pp.185-193
• /
• 1994

Both the wet and dry types of garlic peeling machines are being presently used in domestic garlic processing factory, but the dry type is more popular than the wet type because of higher peeling efficiency. The peeling efficiency of these machines is estimated 50 to 80%, depending on the difference in garlic varieties, physical properties and moisture content of garlic samples. If the peeling time is increased in order to improve the peeling efficiency, the damage on the surface of peeled garlic and the consumption of electric power are also increased. This study was carried out to solve these problems in garlic peeling operation and to obtain the optimun design factor for the friction type separator. The results are summarized as follows : 1. The average friction coefficients of peeled and unpeeled garlic samples were 0.91 and 0.51. respectively, for the acrylic plate, and 0.96 and 0.51, respectively, for the stainless plate. 2. For the inclined acrylic pipe with the pipe length 90 cm, the inclined angle $39^{\circ}$ and the pipe diameter 45-55 mm, the falling time of peeled garlic samples was 0.2 sec, faster than unpeeled garlic samples. 3. For the inclined stainless pipe with the pipe length 90 cm, the inclined angle $34^{\circ}$, $39^{\circ}$ and the pipe diameter pipe 35 mm, the falling time of peeled garlic samples was 0.7 sec, slower than that with the pipe diameter 47mm. 4. The stainless pipe with the pipe length 80~90 cm, the inclined angle $39^{\circ}{\sim}40^{\circ}$ and the pipe diameter 40~50 mm was the most suitable as the material of friction pipe. 5. Experimental garlic peeling machine is composed of garlic sample feeding device, friction stainless pipe and hopper. The peeling efficiency was 81 to 96%, and the separating capacity, 600 gr/min.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.300-304
• /
• 2013

Pine wilt disease caused by pine wood nematode, Bursaphelenchus xylophilus (Steiner et Buhrer) Nickle, has become the most serious threat to pine trees in Korea since 1988. Pine wood nematode is transferred to healthy trees by Monochamus alternatus (Coleoptera: Cerambycidae) during its maturation feeding and female oviposition. A typical control method against insect vectors in Korea is fumigation of the dead trees by using metam-sodium SL (25%). However, this method is not environment friendly because of the forest contamination by chemical application and destroying landscape by plastic cover. Portable Bark Remover (PBR) was invented to reduce these environmental problems. The vectors oviposit under the bark of the newly dead trees only. Debarking infested trees prevents the vectors from laying eggs and eventually, they can not complete their life cycle. The PBR is a modified debarking device that is attached on the top of the electrical chain saw, which allows ease and rapid debarking of the infested trees. The new method by PBR is expected to be more economic and effective than other conventional methods such as "crushing", "burning" and "fumigation".

• Child Health Nursing Research
• /
• v.25 no.2
• /
• pp.103-111
• /
• 2019

Purpose: This study aimed to investigate incidence of delirium in the pediatric intensive care unit (PICU) and to analyze associated risk factors. Methods: The participants were 95 patients, newborn to 18 years, who were admitted to the PICU. The instruments used were the Richmond Agitation Sedation Scale (RASS), and the Cornell Assessment of Pediatric Delirium. Data analysis was performed using the descriptive, $x^2$ test, t-test, and logistic regression analyses. Results: The incidence of delirium in children admitted to the PICU was 42.1%. There were significant differences according to age ($x^2=14.10$, p=.007), admission type ($x^2=7.40$, p=.007), use of physical restraints ($x^2=26.11$, p<.001), RASS score ($x^2=14.80$, p=.001), need for oxygen ($x^2=5.31$, p=.021), use of a mechanical device ($x^2=9.97$, p=.041), feeding ($x^2=7.85$, p=.005), and the presence of familiar objects ($x^2=29.21$, p<.001). Factors associated with the diagnosis of delirium were the use of physical restraint (odds ratio [OR]=13.82, 95% confidence interval [CI]=4.16~45.95, p<.001) and the presence of familiar objects (OR=0.09, 95% CI=0.03~0.30, p=.002). Conclusion: Periodic delirium assessments and intervention should be actively performed. The use of restraints should be minimized if possible. The caregiver should surround the child with familiar objects and ensure a friendly hospital environment that is appropriate for the child.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.91-99
• /
• 2022

By applying METHOD 514.8 of the US military standard MIL-STD-810H, vibration analysis of the winding core automatic feeding device was performed during vehicle transportation. The contact point between the LM guide and main support frame was weak in the vertical axis, transverse axis, and longitudinal axis during the transportation of the automatic winding core feeder vehicle, and the maximum equivalent stress was 236.31 MPa in the longitudinal axis. When random vibration was applied, the safety margin in the longitudinal direction was 0.26, indicating low safety. The safety margin was changed by increasing the damage factor to 0.1. Finally, the safety margin was improved to 3.48 to secure safety. Resonance occurred with a Q factor of 9.34 in the harmonic response to which the RMS value of the ASD data was input, and the vertical axis safety margin was derived as 0.16. When the damping factor was 0.15, the Q factor was 3.37, and resonance was avoided with a safety margin of 6.62.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4329-4337
• /
• 2022

Jet impinging device is designed for decay heat removal on horizontal fuel rods in a low temperature heating reactor. An experimental system with a fuel rod simulator is established and experiments are performed to evaluate water film covering capacity, within 0.0287-0.0444 kg/ms mass flow rate, 0-164.1 kW/m² heating flux and 13.8-91.4℃ feeding water temperature. An effective method to obtain the film coverage rate by infrared equipment is proposed. Water film flowing patterns are recoded and the film coverage rates at different circumference angles are measured. It is found the film coverage rate decreases with heating flux during single-phase convection, while increases after onset of nucleate boiling. Besides, film coverage rate is found affected by Marangoni effect and film accelerating effect, and surface wetting is significantly facilitated by bubble behavior. Based on the observed phenomenon and physical mechanism, dry-out depth and initial dry-out rate are proposed to evaluate film covering potential on a heating surface. A model to predict film coverage rate is proposed based on the data. The findings would have reliable guide and important implications for further evaluation and design of decay heat removal system of new reactors, and could be helpful for passive containment cooling research.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.39-48
• /
• 1983

This study was performed to obtain the basic data which could be used for the modification of the manual center-burner-type rice-husk furnace into a small scale automatic type for the multi-purpose use in the farm. For this purpose, first, the utilization feasibility of the rice-husk furnace in the farm was analyzed briefly in aspects of available amount of rice-husk for the fuel, annual operation time and replaceble amount of residential heating energy with rice-husk in the farm. For the experiment a prototype furnace geared with an automatic feeding device was fabricated, and feed rate, mold size and chimney height were changed to investigate the combustion efficiency of rice-husk and thermal efficiency of the furnace. Also, optimum and limiting operational factors were observed in each treatments. The results obtained are summarized as follows. 1. If the rice-husk is intensively used for residential heating in the farm for winter season, on an average 51 percent of the total heating energy can be replaced with the rice-husk. Therefore, development of a small scale automatic rice-husk furnace was recognized to be feasible. 2. The operational condition depending on husk-feed rates was very important factor for successive steady burning operation of the given furnace. When the feed-rate was 1.5 kg/hr, the top of the burning zone should be kept at the position about 55 cm from the bottom of the combustion chamber with the periodic removal of ash (termed as steady state position), which was 18 cm above the mold waist. When the feed rates were 2.4 kg/hr and 3.0 kg/hr, the steady state position was at about 4 cm above the mold waist. 3. The mold size affected inflow rate of air into the furnace and consequently CO content in the exhaust gas. The relatively bigger mold gave positive effect on the air-inflow rate. 4. When the husk-feed rates were 1.5 kg/hr, 2.4 kg/hr, 3.0 kg/hr, the combustion efficiencies of the rice-husk were 98.5%, 97.4% and 95.0%, the thermal efficiencies of the furnace were 93.4%, 93.2% and 87.6%, and CO content in the exhaust gas were 1.21%, 1.03%, and 2.43%, respectively. The air-inflow rates were decreased with the increase of feed rates. When the amount of excess air was 30-40%, the CO content in the exhaust gas was at the minimum level. 5. When the chimney height was lowered from 260 cm to 96 cm, the air-inflow rate was slightly decreased, but the average temperature in the combustion chamber, CO content in the exhaust gas and combustion and thermal efficiencies were not changed significantly. 6. The incidental problems associated with the protytype furnace were accumulation of the ash inside the mold, accumulation of the cinder between the outer-drum of the furnace and the combustion chamber wall, and accumulation of the cinder in the chimney.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.148-148
• /
• 2011

Recently, there have been many research activities to develop the large-area plasma source, which is able to generate the high-density plasma with relatively good uniformity, for the plasma processing in the thin-film solar cell and display panel industries. The large-area CCP sources have been applied to the PECVD process as well as the etching. Especially, the PECVD processes for the depositions of various films such as a-Si:H, ${\mu}c$-Si:H, Si3N4, and SiO2 take a significant portion of processes. In order to achieve higher deposition rate (DR), good uniformity in large-area reactor, and good film quality (low defect density, high film strength, etc.), the application of VHF (>40 MHz) CCP is indispensible. However, the electromagnetic wave effect in the VHF CCP becomes an issue to resolve for the achievement of good uniformity of plasma and film. Here, we propose a new electrode as part of a method to resolve the standing wave effect in the large-area VHF CCP. The electrode is split up a series of strip-type electrodes and the strip-type electrodes and the ground ones are arranged by turns. The standing wave effect in the longitudinal direction of the strip-type electrode is reduced by using the multi-feeding method of VHF power and the uniformity in the transverse direction of the electrodes is achieved by controlling the gas flow and the gap length between the powered electrodes and the substrate. Also, we provide the process results for the growths of the a-Si:H and the ${\mu}c$-Si:H films. The high DR (2.4 nm/s for a-Si:H film and 1.5 nm/s for the ${\mu}c$-Si:H film), the controllable crystallinity (~70%) for the ${\mu}c$-Si:H film, and the relatively good uniformity (1% for a-Si:H film and 7% for the ${\mu}c$-Si:H film) can be obtained at the high frequency of 40 MHz in the large-area discharge (280 mm${\times}$540 mm). Finally, we will discuss the issues in expanding the multi-electrode to the 8G class large-area plasma processing (2.2 m${\times}$2.4 m) and in improving the process efficiency.

• The Korean Journal of Rehabilitation Nursing
• /
• v.4 no.1
• /
• pp.31-45
• /
• 2001

The purpose of this study was to investigate the relationship between self-concept and self-care activities of the cerebral palsied adolescents and to gain the baseline data for development of effective rehabilitation nursing intervention program of the cerebral palsied adolescents. The design of this study was a descriptive correlational study. The subjects of the study were 160 cerebral palsied adolescents attending at special schools located in Seoul and Kyonggi and rehabilitation centers located in Seoul, Kyonggi and Kyongnam province. The data was collected from May 20 to July 20, 2000. The instrument used for this study were the self-concept scale(50items 4point scale) and self-care activities scale(29items 4point scale). Self-Concept Scale had developed by Fitt(1965), which was standardized by Chung(1968) and modified by Kim(1984). Self-Care Activities Scale developed by the researcher through out the consulting of expert and pilot study on the basis of ADL check list developed by Kang(1984) and LDSQ-3(Lambeth Disability Screening Questionnair-3) developed by Na et al. (1995). The data was analyzed by the SPSS/PC+program using frequency, percentage, mean, standard deviation, t-test, ANOVA & Scheffe test and Pearson's correlation coefficient. The results of this study were as follows; 1. The mean score of self-concept was $138.55{\pm}17.20$(range: 50-100), which the item mean score was $2.77{\pm}0.34$(range: 1-4). The score of subarea of the self-concept was the highest score in family self ($3.01{\pm}0.54$) and the lowest score in physical self ($2.52{\pm}0.42$). 2. The mean score of self-care activities was $95.25{\pm}21.69$ (range: 29-116), which the item mean score was $3.28{\pm}0.75$ (range: 1-4). The score of subarea of the self-care activities was the highest score in feeding($3.75{\pm}0.59$) and the lowest score in walking($2.64{\pm}1.21$). 3. There were statistically significant difference in the score of self-concept according to the age (F=3.24, P=.04), the grads (F=4.36, P=.01), and types of cerebral palsy (F=2.42, P=.03). 4. There were statistically significant difference in the score of self-care activities according to the age (F=8.29, P=.00), the grads (F=16.05, P=.00), types of living place (F=6.46, P=.00), types of cerebral palsy (F=48.92, P=.00), whether or not receiving a rehabilitation therapy (t=-3.64, P=.00), whether or not receiving a vocational training (t=2.14, P=.03), and whether or not using a device (t=-7.42, P=.00). 5. There was not significant correlation between self-concept and self-care activities (r=.081, P=.311).