Browse > Article
http://dx.doi.org/10.1016/j.net.2022.06.027

Water film covering characteristic on horizontal fuel rod under impinging cooling condition  

Penghui Zhang (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Bowei Wang (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Ronghua Chen (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
G.H. Su (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Wenxi Tian (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Suizheng Qiu (School of Nuclear Science and Technology, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Publication Information
Nuclear Engineering and Technology / v.54, no.11, 2022 , pp. 4329-4337 More about this Journal
Abstract
Jet impinging device is designed for decay heat removal on horizontal fuel rods in a low temperature heating reactor. An experimental system with a fuel rod simulator is established and experiments are performed to evaluate water film covering capacity, within 0.0287-0.0444 kg/ms mass flow rate, 0-164.1 kW/m2 heating flux and 13.8-91.4℃ feeding water temperature. An effective method to obtain the film coverage rate by infrared equipment is proposed. Water film flowing patterns are recoded and the film coverage rates at different circumference angles are measured. It is found the film coverage rate decreases with heating flux during single-phase convection, while increases after onset of nucleate boiling. Besides, film coverage rate is found affected by Marangoni effect and film accelerating effect, and surface wetting is significantly facilitated by bubble behavior. Based on the observed phenomenon and physical mechanism, dry-out depth and initial dry-out rate are proposed to evaluate film covering potential on a heating surface. A model to predict film coverage rate is proposed based on the data. The findings would have reliable guide and important implications for further evaluation and design of decay heat removal system of new reactors, and could be helpful for passive containment cooling research.
Keywords
Fuel cooling; Falling film; Film coverage rate; Dry-out;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Y.P. Zhang, S.P. Niu, L.T. Zhang, et al., A review on analysis of LWR severe accident, Journal of Nuclear Engineering and Radiation Science (2015), 041018-1.
2 G.H. Su, Wenxi Tian, Yapei Zhang, et al., Severe Accident Phenomenon of Light Water Reactor, National Defense Industry Press, 2016.
3 T.L. Schulz, Westinghouse AP1000 advanced passive plant, Nuclear Engineering and Design 236 (2006) 1547-1557.   DOI
4 Zhaoming Meng, Lifang Liu, Lei Ding, et al., Comparative study on effect of air-water and steam-water mediums on liquid entrainment through ADS-4 in AP1000, Experimental Thermal and Fluid Science 69 (2015) 149-157.   DOI
5 R.K. Sinha, A. Kakodkar, Design and development of the AHWR-the Indian thorium fuelled innovative nuclear reactor [J], Nuclear Engineering and Design 236 (2006) 683-700.   DOI
6 N.D. Patil, P.K. Das, S. Bhattacharyya, et al., An experimental assessment of cooling of a 54-rod bundle by in-bundle injection, Nuclear Engineering and Design 250 (2012) 500-511.   DOI
7 A. Debbarma, K.M. Pandey, Numerical analysis on the effect of flow rates and jet diameter in rewetting vertical nuclear fuel bundle with jet impingements [J], Annals of Nuclear Energy 94 (2016) 518-529.   DOI
8 G. Ribatski, A.M. Jacobi, Falling film evaporation on horizontal tubes, A critical review[J], International Journal of Refrigeration 28 (5) (2005) 635-653.   DOI
9 Swapnil Dubey, Choo, et al., Recent developments of jet impingement nucleate boiling[J], International Journal of Heat and Mass Transfer 89 (2015) 42-58.   DOI
10 Q. Wang, M. Li, W. Xu, et al., Review on liquid film flow and heat transfer characteristics outside horizontal tube falling film evaporator: CFD numerical simulation[J], International Journal of Heat and Mass Transfer 163 (2020), 120440.
11 Chuangyao Zhao, Di Qi, Wentao Ji, et al., A comprehensive review on computational studies of falling film hydrodynamics and heat transfer on the horizontal tube and tube bundle, Applied Thermal Engineering 202 (2022), 117869.
12 M.S. El-Genk, H.H. Saber, Minimum thickness of a flowing down liquid film on a vertical surface, International Journal of Heat and Mass Transfer 44 (2001) 2809-2825.   DOI
13 J.F. Roques, J.R. Thome, Falling films on arrays of horizontal tubes with R-134a, Part II: flow visualization, onset of dryout, and heat transfer predictions[J], Heat Transfer Engineering 28 (5) (2007) 415-434.   DOI
14 H. Esmaili, MELCOR Computer Code Manuals, vol. 2, 2015.
15 Xi Huang, Xu Cheng, Modification and application of water film model in COCOSYS for PWR's passive containment cooling, Nuclear Engineering and Design 280 (2014) 251-261.   DOI
16 R. Chen, P. Zhang, P. Ma, et al., Experimental study of the steam condensate dripping behavior on the containment dome[J], Nuclear Engineering and Design 346 (2019) 131-139.   DOI
17 Fangnian Wang, Xu Cheng, Modeling approach of flowing condensate coverage rate on inclined wall for aerosol wash down, Nuclear Engineering and Design 355 (2019), 110349.
18 A. Bdb, B. Mb, C. Cnm, et al., Falling film boiling of refrigerants over nanostructured and roughened tubes: heat transfer, dryout and critical heat flux, International Journal of Heat and Mass Transfer 163 (2020), 120452.
19 Tianjiao Zhang, Liangdong Ma, Jili Zhang, Experimental study on falling film evaporation characteristics of R-134a outside of a vertical enhanced tube, International Journal of Heat and Mass Transfer 180 (2021), 121805.
20 A. Bdb, A. Jpm, B. Jrt, Falling film boiling and pool boiling on plain circular tubes: influence of surface roughness, surface material and saturation temperature on heat transfer and dryout, Experimental Thermal and Fluid Science 109 (2019), 109870.
21 R.N. Wenzel, Resistance0f solid surfaces to wetting by water, Industrial and Engineering Chemistry 28 (1936) 988-994.   DOI
22 A.B.D. Cassie, Baxter.Wettability of Porous Surfaces, vol. 44, Transaction Faraday Society, 1944, pp. 546-551.   DOI
23 W.Q. Tao, Heat Transfer, Higher Education Press, 2019, ISBN 9787040514223.
24 Y. Zhou, Z. Cai, Z. Ning, et al., Numerical simulation of double-phase coupled heat transfer process of horizontal-tube falling film evaporation, Applied Thermal Engineering 118 (2017) 33-40.
25 B. Tan, W.X. Tian, R.H. Chen, et al., Experimental study of air-steam-mixture condensation underneath containment vessel surface[J], Nuclear Science and Engineering 195 (8) (2021) 838-852.
26 J.F. Roques, J.R. Thome, Falling films on arrays of horizontal tubes with R-134a, Part I: boiling heat transfer results for four types of tubes[J], Heat Transfer Engineering 28 (5) (2007) 398-414.
27 U. Gross, Falling Film Evaporation inside a Closed Thermosyphon, vol. 7, 10th International Heat Transfer Conference, Brighton, UK, 1994, pp. 443-448.
28 P.H. Jin, C.Y. Zhao, W.T. Ji, W.Q. Tao, Experimental investigation of R410Aand R32 falling film evaporation on horizontal enhanced tubes, Applied Thermal Engineering 137 (2018) 739-748.