• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.187-190
• /
• 2000

In this paper, A Feedforward Linear Power Amplifier which is appended a feedback loop for IMT-2000 was designed and fabricated. Feedback loop was used to improve the IMD(Inter-Modulation Distortion) characteristics of the main amplifier. And it is easy to cancel IMD on the min path and control IMD cancellation loop, compared with basic Feedforward Linear Power Amplifier. This feedback loop has the same effect of the Predistroter. So, This power amplifier was improved in IMD characteristics to add the effect of Predistroter to basic Feedforward amplifier. And the disigned power amplifier in this paper represented the 40dBm(10W) output and -55dBc 3rd IMD at center frequency 2.14GHz (@10MHz).

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.982-983
• /
• 2006

This paper deals with an analysis and design of the state feedback current controller's gain in the three-phase current control systems. First, this paper derives the transfer function of the closed loop current control system and also compares the state feedback current controller with the conventional proportional integral controller. A new pole placement method by using the pole/zero cancellation method is proposed to give a simple and concrete concept with respect to the pole selection. Experimental results on the permanent magnet synchronous motor show that the proposed method is very useful to design the gain of the state feedback current controller.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.825-831
• /
• 2016

In this paper, a transimpedance amplifier based on a new DC offset cancellation (DCOC) method is proposed for WCDMA/LTE applications. The proposed method applies a sample and hold mechanism to the conventional DCOC method with a DC feedback loop. It prevents the removal of information around the DC, so it avoids signal-to-noise ratio degradation. It also reduces area and power consumption. It was designed in a $0.13{\mu}m$ deep n-well CMOS technology and drew a maximum current of 1.58 mA from a 1.2 V supply voltage. It showed a transimpedance gain of $80dB{\Omega}$, an input-referred noise current lower than 0.9 pA/${\surd}$Hz, an out-of-band input-referred 3rd-order intercept point more than 9.5 dBm, and an output DC offset lower than 10 mV. Its area is $0.46mm{\times}0.48mm$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1252-1263
• /
• 2009

In this paper, in order to improve a service quality and to broaden the service coverage in the mobile communication system a study on a digital RF repeater employed with an Interference Cancellation System(ICS) is performed. The digital RF repeater employed with an ICS is implemented to remove interference and feedback signals which are disadvantages of a conventional(or general) RF repeater. This thesis presents the design and experiments of the new wireless repeater. The proposed wireless repeater consists of a RF repeater mounted with digital engine. The digital ICS engine consists of a DSP and FPGA. The digital engine and RF circuit are designed into a one-piece. After developing hardware through the digital platform they are also designed and fabricated into a one-piece in order to apply a best performance repeater system. The method of removing interference and feedback signals is an adaptive IF technique employed with a LMS algorithm. The powerful performance and fast convergence speed is obtained by using this method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.9
• /
• pp.37-43
• /
• 2010

An Interference Cancellation Wireless Repeater transmitts directly amplified the RF signal input to extend the coverage of the base station. Such a repeater inevitably suffers from the feedback interferences due to the environment and the adaptive Interference Cancelling System(ICS) is necessary. In this paper, the Variable Stepsize Complex Sign -Sign(VSCSS) LMS algorithm for ICS is presented. The algorithm can be implemented without multiplication/division arithmetic operation so that the required logic resources can be dramatically reduced in FPGA implementation. The performance of the proposed algorithm was analyzed in comparison with CSS-LMS algorithm and the learning curves obtained from simulation showed an excellent agreement with the theorical prediction. The simulation result with ICS in fading feedback channel environment showed the performance of the proposed algorithm is competible with NLMS algorithm.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.390-396
• /
• 2021

In this research, design and fabrication of marine repeater capable to extend communication coverage in monitoring system of fishing gear automatic identification, which is one of implementation method of the real-name electric fishing gear system declared by Ministry of Oceans and Fisheries in 2016, is reported. The proposed marine repeater is fabricated in a form of RF repeater with interference cancellation system (ICS), which can cancel the oscillation due to feedback signal between service antenna and link antenna. In design process, we secure the isolation of 30 dB between service antenna and link antenna. It is confirmed that when the level of feedback signal into repeater input be lower of 15 dB than repeater gain, error vector magnitude due to oscillation can be lower than the performance criterion of 6%, from the test verification. It is expected that the service coverage will be extended by applying the developed marine ICS RF repeater into marine IoT network including monitoring system of fishing gear automatic identification.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.548-551
• /
• 2003

The adaptive filter is proposed for removing EOG from measured EEG on the frontal lobe. The proposed adaptive filter has been implemented and the feedback output control algorithm has been employed to control the alpha wave ratio on the basis of TMS320C31 DSP board with the on-line and real time performance. The feedback algorithm controls the input voltage of stimulating devices on the portable bio-feedback system. The EEG data are acquired at the $F_{p1}$ and $F_{p2}$ localization and are processed by the proposed adaptive filter. We demonstrated that the proposed adaptive filter could effectively remove EOG from the measured EEG on the frontal lobe and the feedback algorithm is proper to control the output voltage of DSP board using the ratio of the alpha wave.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.440-444
• /
• 2007

As the mobile communication service is widely used, the demand for wireless repeaters is rapidly increasing because of the easiness of extending service areas. But a wireless repeater has a problem that the output of the transmit antenna is partially fed back to the receive antenna, which results in feedback interference. In this paper, we propose a new varable step-size LMS algorithm, which utilizes correlation between reference and error signals to adjust the step sizes, for cancelling the feedback interference signals in the WCDMA repeater under time-varying multi-path channels. The proposed algorithm was investigated through computer simualation by being applied to the time-varying channels. The simulation results demonstrated that the proposed one is superior to the conventional ones in terms of cancelation perormance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.3
• /
• pp.193-203
• /
• 1988

In this paper, an echo canceller(EC) using decision feedback at the ISDN U-interface is presented and its performance based on the stochastic iteration algorithm is analyzed, and compared with the other conventional EC. The steady state mean-squared error(MSE) by the analytical resutls on the decision feedback-EC turns out to be smaller than that of the other linear EC. The performance of the ECs with the same convergence factor are almost the same regardless of different channel characteristics.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.117-118
• /
• 2007

The received signal of ICS repeater is composed of BS(Base Station) and feedback signals. In this case, if the feedback signal is not rejected, system is oscillated. we use the IF signal for rejecting the feedback signal at ICS system. In general, SAW filter is used to reject the image of If signal. the use of this filter generates the system delay problems. In this paper, instead of SAW filter we use the Hilbert transform for rejecting image signal.