• International Journal of Internet, Broadcasting and Communication
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2014

This paper presents a study on nonlinear time varying systems based on differential geometry. A brief introduction about controllability and involutivity will be presented. As an example, the exact feedback linearization and the approximate feedback linearization are used in order to show some application examples.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.202-202
• /
• 2000

In this paper, the synchronous generator model which is derived from the swing equation and the Park's equation is transformed to an adequate form for feedback linearization. And the single controller is designed in order to play the role of both PSS and AVR. The result of the simulations shows that the stability of the system is guaranteed in the wide range of operating points.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.138-141
• /
• 2011

This paper presents an LMI-based method to design an output feedback integral sliding mode controller for a class of uncertain systems. Using LMIs we derive an existence condition of a sliding surface. And we give a switching feedback control law. Finally, we give a numerical design example in order to show the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1137-1139
• /
• 1996

Feedback Linearization technique needs the exact cancellation of nonlinearity which restricts its application to real environment. To overcome these shortcomings, High-pin feedback is good remedy to this problem. In this paper, we briefly survey the high-gain feedback control technique and show some conditions for applying this method to nonlinear systems. In order to use this technique in real situation, some properties of ${\varepsilon}$-bound and semi-global stabilization are discussed.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.6
• /
• pp.342-350
• /
• 2003

In this paper, a levitation controller for a magnetic levitation(MagLev) system is designed and implemented. The target to be controlled is PEM(permanent and electromagnet) type with 4-corners levitation which is open-loop unstable, highly non-linear and time-varying system. The digital control system consists of a VME-based CPU board, AD board, PU board, 4-Quadrant chopper, and gap sensor, accelerometer as feedback sensors. In order to estimate the velocity of the magnet, we used 2nd-order state observer with acceleration and gap signal as input and output, respectively. Using the estimated states, a state feedback control law for the plant is designed and the feedback gains are selected by using the pole-placement method. The designed controller is experimentally validated by step-type gap reference change and force disturbance test.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.10
• /
• pp.563-571
• /
• 2000

In this paper, a nonlinear adaptive control method for an EMS(Electro-Magnetic Suspension) system with mass uncertainty is proposed. Using the coordinate transformation and feedback linearizing control, EMS system has been transformed into the form of parametric strict-feedback system with unknown virtual control coefficients. With this transformed system, tuning functions approach, which is an advanced from of adaptive backstepping, has been applied in order to stabilize the system against mass uncertainty. Computer simulation is also carried out in order to compare the performance of the proposed controller with that of feedback linerizing controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.58-58
• /
• 2000

As many sensors and actuators are used in various automated systems, the application of network system to real-time distributed control is gaining acceptance in many industries. In order to take advantages of the network technique. however, network implementation should be carefully designed to satisfy real-time constraints and to consider network delays. This paper presents the implementation of feedback control system in Profibus-DP. Profibus-DP is a type of fieldbus protocols that are specifically designed to interconnect simple devices with fast I/O data exchange. As feedback control in profibus-DP is implemented, Network delays is found with influence of system performance. We analyze network delays in Profibus-DP into 3 reasons - dead time in Profibus interface, protocol delay, delay by asynchronization. In order to compensate the network delays, we introduce control algorithms with time delay concept. The results show that network delay can be compensated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.346-346
• /
• 2000

We proposed a method of second-order iterative learning control with feedback, which shows an enhancement of convergence speed and robustness to the disturbances in our previous study. In this paper, we show that the proposed second-order iterative learning control algorithm with feedback is more effective and has better convergence performance than the algorithm without feedback in the case of the existence of initial condition errors. And the convergence woof of the proposed algorithm in the case of the existence of initial condition error is given in detail, and the effectiveness of the Proposed algorithm is shown by simulation results.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.629-635
• /
• 1999

A second-order iterative learning control algorithm with feedback is proposed in this paper, in which a feedback term is added in the learning control scheme for the enhancement of convergence speed and robustness to disturbances or system parameter variations. The convergence proof of the proposed algorithm is givenl, and the sufficient condition for the convergence of the algorithm is provided. And it also includes the discussions about the convergence performance of the algorithm when the initial condition at the beginning of each iteration differs from the previous value of the initial. Simulation results show the validity and efficiency of the proposed algorithm.

• Earthquakes and Structures
• /
• v.6 no.2
• /
• pp.217-235
• /
• 2014

In this paper, different feedback control strategies are presented for active seismic control using proportional-integral-derivative (PID) type controllers. The parameters of PID controller are found by using an numerical algorithm considering time delay, maximum allowed control force and time domain analyses of shear buildings under different earthquake excitations. The numerical algorithm scans combinations of different controller parameters such as proportional gain ($K_p$), integral time ($T_i$) and derivative time ($T_d$) in order to minimize a defined response of the structure. The controllers for displacement, velocity and acceleration feedback control strategies are tuned for structures with active control at the first story and all stories. The performance and robustness of different feedback controls on time and frequency responses of structures are evaluated. All feedback controls are generally robust for the changing properties of the structure, but acceleration feedback control is the best one for efficiency and stability of control system.