• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.526-528
• /
• 2006

An adaptive output-feedback neural control problem of SISO strict-feedback nonlinear system is considered in this paper. The main contribution of the proposed method is that it is shown that the output-feedback control of the strict-feedback system can be viewed as that of the system in the normal form. As a result, proposed output-feedback control algorithm is much simpler than the previous backstepping-based controllers. Depending heavily on the universal approximation property of the neural network (NN) only one NN is employed to approximate lumped uncertain nonlinearity in the controlled system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.3
• /
• pp.112-121
• /
• 2002

This paper describes a new bike system for the postural balance rehabilitation training. Virtual environment and three dimensional graphic model is designed with CAD tools such as 3D Studio Max and World Up. For the real time bike simulation, the optimized WorldToolKit graphic library is embedded with the dynamic geometry generation method, multi-thread method, and portal generation method. In this experiment, 20 normal adults were tested to investigate the influencing factors of balancing posture. We evaluated the system by measuring the parameters such as path deviation, driving velocity, COP(center for pressure), and average weight shift. Also, we investigated the usefulness of visual feedback information by weight shift. The results showed that continuous visual feedback by weight shift was more effective than no visual feedback in the postural balance control It is concluded this system might be applied to clinical use as a new postural balance training system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1523-1526
• /
• 1996

This paper presents a new method of force reflection in the teleoperated mobile robot control: artificial force feedback. Generally it is well known that force feedback from slave to master increases the reality with which the operator interacts with the environment. In the applications of the teleoperated mobile robot, however, such a force feedback control algorithm has rarely appeared in the literature because the contact force between the environment and the mobile robot is not available. In this paper, a method of artificially generating the feedback force for the teleoperated mobile robot is presented in order to improve the task performance. The computed artificial force feeds into the new designed joystick so as to increase the telepresence of the environment. Through simulations, we confirm the validity and effectiveness of our algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.514-518
• /
• 2005

In this paper an adaptive fuzzy PI controller with feedback linearizing meth od is implemented to controlling flux and torque separately in induction motor. In this paper first decoupling of torque and flux which are outputs to be controlled, is achieved by using feedback linearization methodology. Then for reducing the effect of noise and rejection of disturbance, main part of controller which is adaptive PI fuzzy controller, is designed. Coefficients of PI controller are determined by defined fuzzy rules due to error dynamic. Inputs of fuzzy system are defined sliding surfaces which consist of torque and flux errors. The main contribution of this paper is effect reduction of noise and disturbance on torque and flux which is based on fuzzy logic and nonlinear control. At last the effectiveness of the proposed control scheme in presence of noise and load disturbance is simulated and comprised to applying sliding method. The results verify better effectiveness of the proposed method for effect reduction of noise and disturbance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.192-201
• /
• 1997

The feedback control scheme of the pressure control system of the rear wheel steering gear which has relatively large volume and sprung load was built up in order to improve th response characteristic of the system. The control algorithm chosen was a feedback compensator joined by a feedfoward compensator and the model matching method was used in the process of control system design. The structures and properties of the reference models were inspected and the parameters of the controller were decided. The improvement of the response characteristic of the pressure control valve by means of the feedback control is affirmed. Particularly, when the order of the system model is higher than the 2nd order, the effectiveness of the feedback control on the improvement of the response characteristic of the valve is distinct. And the convenience of the model matching method is the process of control system design is confirmed as well.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.982-983
• /
• 2006

This paper deals with an analysis and design of the state feedback current controller's gain in the three-phase current control systems. First, this paper derives the transfer function of the closed loop current control system and also compares the state feedback current controller with the conventional proportional integral controller. A new pole placement method by using the pole/zero cancellation method is proposed to give a simple and concrete concept with respect to the pole selection. Experimental results on the permanent magnet synchronous motor show that the proposed method is very useful to design the gain of the state feedback current controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2053-2056
• /
• 2016

In this paper, we propose an output feedback tracking control method for the wheeled mobile robots with kinematic disturbances. The kinematic disturbances should be compensated to avoid the performance degradation. Also, the unavailable velocity of the mobile robot should be estimated. These should be estimated together by designing the nonlinear observer. Based on these estimates, the output feedback controller can be designed. The stability of the mobile robot control systems using the proposed method is rigorously analyzed and the simulation results are also provided to validate the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.11
• /
• pp.955-966
• /
• 2013

We propose two feedback interference cancellers(FICs) to improve the performance of the equalization digital on-channel repeater(EDOCR) with the FIC for the ATSC DTV broadcasting system. The FIC estimates the feedback channel between Tx. and Rx. antennas of the repeater by cross-correlating the reference signal and the feedback signal. Since there is a DC pilot which ruins the white property of the ATSC DTV signals, the FIC cannot estimate the feedback channel accurately. To solve the problem, the structural method which uses an additional DC pilot free reference for feedback channel estimation and the algorithmic method based on the digital signal processing which whitens the ATSC DTV signals and performs the feedback cancellation in the whitened signal domain. Simulation results show that the proposed two FICs show better feedback cancellation performance than the conventional FIC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.327-334
• /
• 2008

Conventional on-channel-repeaters (OCRs) have a crucial problem that the power of a re-transmitted signal is highly limited by a feedback signal due to antenna coupling. The power limitation problem in OCRs has been solved by incorporating a demodulation-type feedback canceller which eliminates unwanted feedback signals by estimating a feedback channel. In applying the demodulation-type feedback canceller to T-DMB repeaters, there is a troublesome problem of unfrequent known pilot symbols, resulting in poor convergence performance of channel estimation. To solve this problem and enhance the accuracy of estimation, we propose a partitioning method of the Phase Reference Symbol (PRS) transformed in time domain. Since filter coefficients are updated every one partitioned subgroup, the number of updates is increased by the number of partitioned subgroups and thus the convergence speed is enhanced. The improved performance of feedback-channel estimation is directly connected with the feedback-cancellation performance. Simulation result shows that the feedback canceller incorporating the proposed partitioning method has a good performance in terms of residual feedback power.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1906-1908
• /
• 2004

We propose a result on the stabilization of nonlinear time-delay systems via the feedback linearization method. Using the predictor based control and the parametric coordinate transformation, we introduce a stabilizing controller to compensate time delay. Specifically, we present the delay-dependent stability analysis to makes the considered system stable. Also, an illustrative example is provided