• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.18-25
• /
• 1994

In this papaer, the input impedance of the rectangular microstrip patch antennas with the multilayered structure is analysed by using the moment method technique in the spectral domain. The analysis is carried out for two different feeding structures : directfeeding structure and electromagnetic-feeding structure. In order to obtain the accurate input impedance, the current distribution on the microstrip feed line is modeled by the quasi-TEM travelling wave and the PWS(piecewise sinusoidal) mode. The input impedances of the designed microstrip antennas are measured and compared with the calculation. which shows a good agreement.

• Journal of Welding and Joining
• /
• v.31 no.1
• /
• pp.26-32
• /
• 2013

Recently, welding technology of nonferrous metals which were difficult to implement by arc welder has become available through digitalization of arc welding machine. Among them, the welding quality improvement of aluminum welding is very noticeable. These results increase the arc stability by controlling arc current and voltage waveform precisely, and control wire feed speed by synchronizing with arc current which the feed rate of filler wire is controlled by a precise motor control of servomotor and not by a simple constant speed feeding. Not only through the hardware digitalization of arc welding machine but also through advance of software of arc welding, it became possible to implement a certain level of welding quality by a simple operation. These led to CMT welding process implementation which requires low heat input than current arc welding and highly increased the applicability of the aluminum welding.

• Journal of Korea Foundry Society
• /
• v.33 no.6
• /
• pp.248-253
• /
• 2013

To add alloying elements into a pure copper melt, the wire-feeding efficiency of cored (alloy containing) wire was evaluated using a commercial, computational fluid-dynamics program. The model design was based on an industrial-scale production line. The variables calculated included wire feed rate, melt temperature, wire diameter, melt flow rate and wire temperature. Efficiency was evaluated after a series of calculations based on the penetration depth of the alloy-wire into the molten copper bath. Of the five variables investigated, the wire feed rate and wire diameter were the most influential factors affecting the feeding efficiency of the cored-wire.

• Journal of electromagnetic engineering and science
• /
• v.8 no.4
• /
• pp.153-157
• /
• 2008

Most of malfunctions in electronic equipment or systems controlled by processors is occurred by the differential- and common-mode noises, and the electrical fast transient (EFT). The International Electrotechnical Commission (IEC) has prepared the dummy signal to test the immunity level of the equipment. For the countermeasure against the differential- and common-mode noises, and the EFT, we designed, fabricated, and tested a new electromagnetic compatibility (EMC) filter, which is composed of feed-through capacitors and ferrite beads with high permeability. As a result, the filter showed excellent differential- and common-mode noises filtering, and immunity improving characteristics over the frequency band from 30 MHz to 1.5 GHz and 1.8 GHz, respectively.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.35-40
• /
• 1986

The production process of a fine size fraction of Korean kaolin by ball milling is studied in this paper by analyzing the size distribution the size distribution of products with the Rosin-rammle formular and the rate process of cumulative size fractions with Alyavdin-Chujyo's formular. The size distribution is found to be divided in three regions a coarser part influenced by feed size an intermediate part where the size distribution shows a clear straight line relationship on Rosin-Rammler chart and the finest part with the ultimate limit of fineness by ball milling. Alyavdin-Chujyo's relationship is found to be valid over a very wide range of milling conditions. For different feed sizes the Alyavdin-Chujyo's relationship gives a group of straight lines with a common intersection point which can be defined as the limiting point of the persistent component region.

• Journal of the Korea Society for Simulation
• /
• v.11 no.1
• /
• pp.59-70
• /
• 2002

This article presents the results of research to develop a descriptive model of firm-level productivity that will allow a myriad of factor interactions to be directly accounted for. The model is a linked set of equations that attempt to capture how changes in one-factor influences the level of another factor. and ultimately bottom-line performance. The model is coded in SIMAN. It is used to determine the best use of an infusion of funds should they go for additional automation, or training etc. An application of the model to U.S. industry is presented based on parameter values obtained through a national survey.

• Journal of Environmental Science International
• /
• v.28 no.1
• /
• pp.159-162
• /
• 2019

This study aimed to evaluate the effects of dietary microbial-fermented molasses on egg production and egg quality in laying hens.In total, 90 Hy-line Brown laying hens were divided into two treatment groups (control and 1% microbial-fermented molasses)with three replicates of 15 birds each. During the experimental period, supplementation of hen diets with 1% microbial-fermented molassesdid not influence egg weight, hen-day egg production, egg mass, and feed conversion ratio (p > 0.05), except for feed intake. Regarding egg quality, diets containing 1% microbial-fermented molasses significantly affected eggshell thickness, Haugh unit, and albumen height (p < 0.05). However, there were no remarkable differences between control and 1% microbial-fermented molasses in eggshell color and egg yolk color (p > 0.05). These results indicate that supplementing 1% microbial-fermented molasses to the diet of laying hens improved egg quality parameters such as eggshell thickness, Haugh unit, and albumen height rather than egg production.

• Journal of Environmental Science International
• /
• v.28 no.9
• /
• pp.807-811
• /
• 2019

The present study aimed to examine the effects of dietary illite as a feed additive on the Haugh unit and fatty acid profiles of eggs. One hundred and twenty laying hens (48-week-old Hy-line Brown) were randomly assigned to one of the following two treatments: control or 2% illite powder. At 2 and 4 weeks, the Haugh unit values between the control and 2% illite powder groups were not significantly different (p>0.05). In addition, individual fatty acid content at 2 and 4 weeks did not differ between the treatments (p>0.05), except for palmitic (C16:0) and palmitoleic acid (C16:1) content. The addition of 2% illite powder caused no difference between the total saturated and total unsaturated fatty acids at 2 and 4 weeks (p>0.05). In conclusion, the addition of dietary illite at a rate of 2% did not improve the Haugh unit values or fatty acid profiles of eggs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.3
• /
• pp.111-118
• /
• 2005

Since the residential load is an AC load and the output of solar cell is DC power, the photovoltaic system needs the DC/AC converter to utilize solar cell. In case of driving to interact with utility line, in order to operate at unity power factor, converter must provide the sinusoidal wave current and voltage with same phase of utility line. Since output of solar cell is greatly fluctuated by insolation, it is necessary that the operation of solar cell output in the range of the vicinity of maximum power point. In this paper, DC/AC converter is three phase PWM converter with smoothing reactor. And then, feed-forward control used to obtain a superior characteristic for current control and digital PLL circuit used to detect the phase of utility line.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.107-114
• /
• 1999

This paper presents an application of artificial neural networks(ANN) to assess the dynamic security of power systems. The basic role of ANN is to provide assessment of the system's stability based on training samples from off-line analysi. The critical clearing time(CCT) is an attribute which provides significant information about the quality of the post-fault system behaviour. The function of ANN is a mapping of the pre-fault, fault-on, and post-fault system conditions into the CCT's. In previous work, a feed forward neural network is used to learn this mapping by using the generation outputs during the fault as the input data. However, it takes significant calculation time to make the input data through the network reduction at a fault as the input data. However, it takes significant calculation time to make the input data through the network reduction at a fault considered. In order to enhance the speed of security assessment, the bus data and line powers are used as the input data of the ANN in thil paper. Test results show that the proposed neural networks have the reasonable accuracy and can be used in on-line security assenssment efficiently.