• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3712-3719
• /
• 2011

Confined Pt and $CoFe_2O_4$ nanoparticles (NPs) in a mesoporous core/shell silica microsphere, Pt-$CoFe_2O_4$@meso-$SiO_2$, were prepared using a bi-functional linker molecule. A large number of Pt NPs in Pt-$CoFe_2O_4$@meso-$SiO_2$, ranging from 5 to 8 nm, are embedded into the shell and some of them are in close contact with $CoFe_2O_4$ NPs. The hydrogenation of cyclohexene over the Pt-$CoFe_2O_4$@meso-$SiO_2$ microsphere at $25^{\circ}C$ and 1 atm of $H_2$ yields cyclohexane as a major product. In addition, it gives oxygenated products. Control experiments with $^{18}O$-labelled water and acetone suggest that surface-bound oxygen atoms in $CoFe_2O_4$ are associated with the formation of the oxygenated products. This oxidation reaction is operative only if $CoFe_2O_4$ and Pt NPs are in close contact. The Pt-$CoFe_2O_4$@meso-$SiO_2$ catalyst is separated simply by a magnet, which can be re-used without affecting the catalytic efficiency.

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.307-312
• /
• 1994

The magneto-optical Kerr effect due to the (Fe,Co)/(Pd,Pt,Cu,Ag) multilayer film is calculated considering of multiple reflection effect, and the calculated Kerr spectrum is compared to the reported experimental value. In case of Co/Pd, the reliance of composition and the variable tendency of magneto-optical Kerr rotation angle for Co thickness fully coresponds to experimantal and theoretical value. The theoretical Kerr spectrum of Fe/Cu and Fe/Ag multilayer films show the peaks near the Cu and Ag optical ansorption band in accordance with the experiment. But in case of Co/Pt, the increase tendency of Kerr rofation with decreasing wavelength reported by experiments could not be explained by the optical multiple interference. This difference of theoretical and experimental Kerr spectrum of Co/Pt film might be related with the change of electronic structure of Co and/or Pt from their bulk state.

• Korean Journal of Materials Research
• /
• v.14 no.10
• /
• pp.688-695
• /
• 2004

The capacitor contact barrier(CCB) layers have been introduced in the FeRAM integration to prevent the Pt/Al reaction during the back-end processes. Therefore, the interdiffusion and intermetallic formation in $Pt(1500{\AA})/Al(3000{\AA})$ film stacks were investigated over the annealing temperature range of $100\sim500^{\circ}C$. The interdiffusion in Pt/Al interface started at $300^{\circ}C$ and the stack was completlely intermixed after annealing over $400^{\circ}C$ in nitrogen ambient for 1 hour. Both XRD and SBM analyses revealed that the Pt/Al interdiffusion formed a single phase of $RtAl_2$ intermetallic compound. On the other hand, in the presence of TiN($1000{\AA}$) barrier layer at the Pt/Al interface, the intermetallic formation was completely suppressed even after the annealing at $500^{\circ}C$. These were in good agreement with the predicted effect of the TiN diffusion barrier layer. But the conventional TiN CCB layer could not perfectly block the Pt/Al reaction during the back-end processes of the FeRAM integration with the maximum annealing temperature of $420^{\circ}C$. The difference in the TiN barrier properties could be explained by the voids generated on the Pt electrode surface during the integration. The voids were acted as the starting point of the Pt/Al reaction in real FeRAM structure.

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.27-33
• /
• 1998

We have investigated tunneling magnetoresistance (TMR) properties of Fe/$Al_2O_3$/Co magnetic trilayer junctions sputtered on single-crystal Si (001) substrates. $Al_2O_3$ layers with thicknesses of 50~200 $\AA$ were deposited directly on the bottom ferromagnetic layer by a reactive rf sputtering. For comparsion, we prepared Pt/$Al_2O_3$/Pt tunnel junctions whose current-voltage (I-V) characteristics measured at 300 K indicated that reactively sputtered $Al_2O_3$ is a particularly good material for thin insulating barriers and allows us to form pinhole-free tunnel barriers. The magnetic tunnel junctions exhibit changes of tunnel resistance of about 0.1% at 300 K with an applied magnetic field and it was found that most junctions with Co as a top electrode have rather good I-V and TMR characteristics compared to those with Fe as a electrode. These results were discussed in relation to interfacial on the basis of those for Pt/$Al_2O_3$/Pt.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.153-158
• /
• 2010

The crystallization of FePt/MgO(001) magnetic thin films of various thicknesses has been studied using synchrotron x-ray scattering, atomic force microscope, and vibrating sample magnetometer. In film with a 499-$\AA$-thick, face-centered tetragonal, ordered FePt phase was dominantly crystallized into perpendicular (001) grains keeping the magnetically easy c-axis normal to the film plane during annealing. In film with a 816-$\AA$-thick, however, longitudinal (110) grains keeping the c-axis parallel to the film plane were grown on top of the perpendicular (001) grains. The behavior of the magnetic properties was consistent with the thickness dependence of the crystallization. We attribute the thickness dependence of the crystallization to the substrate effect, which prefers the growth of the c-axis oriented perpendicular grains near the film/substrate interfacial area.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.362-365
• /
• 1995

The magnetic properties for $Fe_{24}Pt_{76}\;and\;Fe_{26}Pt_{74}$ have been investigated. The temperature vs. magnetic susceptibility curve for $Fe_{24}Pt_{76}$ had no peak near the Neel temperature. The magnetization proccess at 4.2 K showed only a linear variation up to the high magnetic field of 240 kOe. That for $Fe_{26}Pt_{74}$ at 77 K showed a metamagnetic transition at 100 kOe. These properties were discussed on the basis of a band picture.

• Journal of Surface Science and Engineering
• /
• v.27 no.1
• /
• pp.3-11
• /
• 1994

Cyclic hot corrosion studies have been carried out on(82~94) wt. % Fe-(5, 10, 15) wt. % Cr alloys con-taining either (1, 3)wt. % of Si or Pt as minor alloying elements in molten salts of($Na_2SO_4$+NaCl) between 820 and $920^{\circ}C$. Si or Pt decreased corrosion rate with the most pronounced effect being observed for alloys having 15wt. %Cr. Especially, as Si or Pt contents are increased from 1 to 3 wt. %, improved corrosion resistance was obtained. The beneficial effect of Si addition is due to the presence of the Si-rich second phase along the grain boundaries as well as the formation of the protective $SiO_2$layer between substrates and oxide scale. The Pt addition also increased the corrosion resistance by enhancing the formation ($Cr_2O_3$+layers and by increasing the adherence of the oxide scale.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.316-316
• /
• 2011

제일원리 계산으로 Fe/Pt (001) 표면의 표면상태도를 계산하고 표면상태도로 부터 얻어진 평형 Fe/Pt (001) 표면구조의 자기이방성에너지를 계산하였음. 계산된 표면상태도로 부터 Fe-rich $L1_2$ 구조와 수직 $L1_0$ 구조가 가장 안정한 표면 Fe/Pt (001) 구조임이 밝혀졌음. 제일원리로 계산 된 두 구조의 자기이방성에너지를 관측하여 두 구조의 자기용이축이 모두 [001] 방향으로 정렬 됨을 확인하였다. 자기이방성에너지가 격자 변화와 표면 형성 중 어떤 원인에 의해 발생하는지 판단하기 위해서 표면구조, 벌크구조, 및 표면구조와 동일한 격자상수를 가진 벌크구조를 비교 하였다. 비교 결과에 의해 자기이방성에너지의 주 원인은 표면 형성임이 밝혀졌으며 이를 좀 더 명확히 하기위해 상태밀도함수를 계산하였다. 상태밀도함수 계산 결과 Fe 원자의 $3d_{z2}$ 오비탈의 페르미 준위 아래에서의 상태가 표면이 형성되면서 증가하는 것을 관측하였으며 이는 [001] 방향으로의 자기이방성을 증가시키는 오비탈이므로 표면 형성에 따른 자기이방성에너지 증가는 Fe 원자의 $3d_{z2}$ 오비탈에 의함이 판명되었다.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.182-188
• /
• 2006

The search for high-density recording materials has been one of most active and vigorous field in the field of magnetism. $FePt-L1_{0}$ nanoparticle has emerged as a potential candidate because of its high anisotropy. In this paper, we provide an overview of recent work at Argonne National Laboratory that contributes to the ongoing dialogue concerning the relation between structure and properties of the FePt nanoparticle system. In particular we discuss the ability to control structure and properties via dosing with Cr. Cr-dosed FePt films were grown via molecular beam epitaxy and annealed at $550^{\circ}C$ in an ultrahigh vacuum chamber, and were studied with the surface magneto-optic Kerr effect (SMOKE), scanning electron microscopy (SEM) and x-ray magnetic circular dichroism (XMCD). We found that small dosage of Cr helps to generate $L1_{0}$ phase FePt magnetic nanoparticles with small size, defined shape and regular spatial distribution on MgO (001) substrate. The nanostructures are ferromagnetic with high magnetic coercivity (${\sim}0.9T$) and magnetic easy axis in the desired out-of-plane orientation. We also show that controlling the lateral region where nanostructures exist is possible via artificial patterning with Cr.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.412-416
• /
• 2013

FePt:Ag (100 nm) nanocomposite thin films were prepared on naturally-oxidized Si substrates by dc magnetron sputtering at room temperature. X-ray diffraction (XRD) and transmission electron microscopy (TEM) are used to investigate the effects of annealing pressures on the ordering processes and microstructures of these films. The average sizes for the $L1_0$ ordered domains and the FePt grains are reduced to d = 9 nm and D = 13 nm from d = 19 nm and D = 34 nm, respectively, when the annealing pressure is enhanced to 0.6 GPa from room pressure at 873 K. Furthermore, the size distribution is improved into a narrow range. With increasing pressure, the coercivity of $L1_0$-FePt:Ag thin films decreases from 15.1 to 7.6 kOe. In the present study, the effects of high pressure on the $L1_0$ ordering processes and microstructures of FePt:Ag nanocomposite films were discussed.