• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.65-71
• /
• 2006

The lightness of components required on marine and shipbuilding industry is requiring high strength of components. In particular, fatigue failure phenomena, which happen in metal, bring on danger in human life and property. Therefore, antifatigue failure technology takes an important part on current industries. In this study, it is investigated about endurance and fatigue crack propagation rate of according to welding methods such as SMAW, FCAW and SAW commonly used for welding structures in present. Endurance limits carried out highly in the order of SMAW, FCAW, SAW and fatigue crack propagation rate out lowly in the order of SMAW, FCAW, SAW. By these results, it is needed to use SMAW welding method for welding structures with small welding capacity and FCAW, SAW methods for large welding structures after consideration about economic gains and operation efficiency of welding. Fatigue crack propagation rate is more affected by strength of welding materials than endurance limit of welding materials according to welding methods.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.38-44
• /
• 2003

In this study, endurance limit and fatigue behavior of load carrying fillet welded cruciform joints depending on commonly used welding methods such as SMAW, SAW, MIG and FCAW are investigated. In respect of endurance limit SMAW specimen showes highest result, and then MIG, SAW, FCAW in descending order. However, SMAW specimen showes lowest crack growth rate and it followed by MIG, FCAW, SAW. By these results, it is needed to use SMAW or MIG welding methods for welding structures with small welding capacity and SAW or FCAW methods for large welding structures with respect to economic benefits and operation efficiency of welding. It was also shown fatigue crack growth rate was more influenced by the strenght of welding materials than the endurance limit of welding materials.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.3
• /
• pp.30-34
• /
• 2022

The CFT(Cornering Fatigue test) and RFT(Radial Fatigue Test) are tests for evaluating the endurance of the disc and rim region of the wheel. In recent, automobile wheel safety standards have been revised and the applied load and target life criteria are different from existing conditions. The verification evaluation of all wheels requires a lot of time and cost. In this study, the endurance severity of each test was compared through strain-life approach by selecting 4 steel and 8 aluminum wheels.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.1
• /
• pp.73-86
• /
• 2022

Background: The purpose of this study is to investigate the effect of plantar flexor on muscle fatigue and endurance when two different sport tapes are applied. Design: Cross-sectional design. Methods: Fifty-one healthy adults were randomly assigned to dynamic taping group (n=17), kinesio taping group (n=17), and control group (n=17). The dynamic taping group used the dynamic tape. The kinesio tape group used the kinesio tape, and the control group doesn't used tape. Every group performed heel rise test and sEMG for every during pre-test and post-test. To evaluate plantar flexor endurance, the number of times was measured during the heel rise test. Results: The number of heel rises increased significantly in the post-test in dynamic taping group compared to the pre-test, and In comparison between groups, the number of heel rises significantly increased in dynamic taping group compared to kinesio taping group and control group. PEF value was significantly increased in the post-test compared to the pre-test in dynamic taping group, and there was a significant difference between the three groups according to the taping application. Conclusion: The results of this study confirmed that dynamic taping was effective in musclular fatigue and endurance on plantar flexor in healthy adults. Based on these results, it is suggested that the application of dynamic tape can be suggested as one of the intervention methods for muscle endurance and muscle fatigue.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.81-88
• /
• 2020

The damping hinge of a built-in refrigerator was examined in terms of its stress and fatigue life. Analysis of the initial design showed that stress concentration occurred at the concave surface of the hinge lever, which was broken during the door opening-and-closing endurance test of the prototype. The maximum von Mises stress at this location exceeded the yield strength. In addition, Goodman fatigue analysis of the initial design showed that the fatigue life at this location was consistent with the failure observed during the endurance test. Based on these results, an improved design for the damping hinge was derived. Analysis of this improved design showed that the stress concentration in the hinge lever of the initial design was eliminated. In this case, the maximum stress occurred at the position where the hinge lever was in contact with the door stopping pin, and the maximum von Mises stress was smaller than the yield strength. Goodman fatigue analysis of the improved design indicated that the fatigue life of the entire damping hinge was infinite. It was therefore concluded that the improved design does not suffer from fatigue damage during the endurance test.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1127-1132
• /
• 2003

Suspension system of vehicle have enough endurance during its life time to protect passenger. Spring is one of major part of vehicle. Thus, a fatigue strength evaluation for leaf spring based on road load response was carried out. At first, strain of leaf spring is measured on the city condition and proving ground condition. And next, the damage analysis of road load response data was carried out. And fatigue test of leaf spring were also carried out. Based on -N life relation, fatigue life of leaf spring was evaluated at belgian mode, city mode and drawing test specification. After that, it is compared the design life of leaf spring and evaluated fatigue life by belgian mode, city mode and drawing test specification. From the above, the maximum load-fatigue life relation of leaf spring was defined by test. and new test target of belgian mode and city mode was proposed to accept design specification of leaf spring. It is expect that proposed test target can verify leaf spring fatigue endurance at specific road condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.14-20
• /
• 2008

Fatigue fracture of engine connecting-rod bolts is encountered frequently during the developement of high-speed engines. Only the engine dyno test is a currently reliable fatigue durability assessment method. It is because the available rig tests cannot mimic the engine running condition completely, and because the finite element analysis cannot provide realistic stresses near the bolt thread that is modeled as a cylinder. This paper introduces a methodology to assess the fatigue durability of the connecting-rod bolts using the finite element analysis. The methods to contruct the bolt model, to extract the critical bolt stresses for the fatigue analysis, and to obtain the bolt fatigue endurance limit experimentally are discussed. Reliability of the method is verified indirectly.

• International Journal of Railway
• /
• v.2 no.4
• /
• pp.131-138
• /
• 2009

Static tensile and fatigue tests were conducted using tensile-shear specimens to evaluate the fatigue strength of a SPCC sheet clinch joint. The maximum tensile strength of the specimen produced at the optimal punching force was 1750 kN. The fatigue endurance limit (=760 N) approached 43% of the maximum tensile load (=1750 N) at a load ratio of 0.1, suggesting that the fatigue limit is approximately half of the value of the maximum tensile strength. The FEM analysis showed that at the fatigue endurance limit, the maximum von-Mises stress of 373 MPa is very close to the ultimate tensile strength of the SPCC sheet (=382 MPa).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.65-65
• /
• 2001

• The Journal of Korean Medicine
• /
• v.34 no.1
• /
• pp.29-34
• /
• 2013

Objectives: This report aimed to demonstrate effect of human placental extract (HPE) pharmacopuncture in students suffering fatigue due to hard work and mental stress. Methods: Thirty-four college students, preparing for the final-term exam, received pharmacopuncture of HPE into Kwanwon (CV4) subcutaneously twice a week for 7 weeks. After every pharmacopuncture of HPE, degree of fatigue was surveyed by questionnaire including physical condition, physical endurance, concentration and memory. Results: Pharmacopuncture of HPE into CV4 gently improved physical condition, physical endurance, concentration and memory. Improvement of physical condition was especially positively correlated with the increasing number of pharmacopuncture of HPE into CV4 as confirmed by calculation of Pearson coefficient. Conclusions: Pharmacopuncture of HPE into CV4 alleviated fatigue in the students from hard work and mental stress.