Finite Element-Based Fatigue Assessment of Engine Connecting-Rod Bolts

엔진 커넥팅 로드 볼트의 유한요소 피로 평가

  • 조성산 (홍익대학교 기계시스템디자인공학과) ;
  • 장훈 (현대자동차) ;
  • 이경우 (현대자동차)
  • Published : 2008.07.01

Abstract

Fatigue fracture of engine connecting-rod bolts is encountered frequently during the developement of high-speed engines. Only the engine dyno test is a currently reliable fatigue durability assessment method. It is because the available rig tests cannot mimic the engine running condition completely, and because the finite element analysis cannot provide realistic stresses near the bolt thread that is modeled as a cylinder. This paper introduces a methodology to assess the fatigue durability of the connecting-rod bolts using the finite element analysis. The methods to contruct the bolt model, to extract the critical bolt stresses for the fatigue analysis, and to obtain the bolt fatigue endurance limit experimentally are discussed. Reliability of the method is verified indirectly.

Keywords

References

  1. S.-S. Cho, H. Chang and K. W. Lee, "Procedure for Computer-Aided Preload Selection of Engine Connecting-Rod Bolts," Int. J. Automotive Technology, Vol.8, No.3, pp.319-325, 2007
  2. H. Tsuzuku and N. Tsuchida, "An Experimental Study of Connecting Rod Big Ends," SAE 950202, 1995
  3. D. Wang, T. G. Keith, Q. Yang and K. Vaidyanathan, "Lubrication Analysis of a Connecting- Rod Bearing in a High-Speed Engine. Part I: Rod and Bearing Deformation," Tribology Transaction, Vol.47, pp.290-289, 2004 https://doi.org/10.1080/05698190490439436
  4. T. Frees and P. Dalhoff, "Fatigue Analysis of Bolted and Welded Joints," NAFEMS Seminar: Fatigue Analysis, pp.1-18, 2000
  5. R. Cioto and A. R. Collares, "Reduction of Fatigue Resistance on Bolts with Thread Rolled after Heat Treatment, as a Result of Superficial Treatment," SAE 2003-01-3657, 2003
  6. G. H. Majzoobi, G. H. Farrahi and N. Habibi, "Experimental Evaluation of the Effect of Thread Pitch on Fatigue Life of Bolts," Int. J. Fatigue, Vol.27, pp.189-196, 2005 https://doi.org/10.1016/j.ijfatigue.2004.06.011
  7. Z. Q. Hu and M. Sadowski, "Fatigue Analysis for Isolated Rocker Cover Capscrew," SAE 2002- 01-0664, 2002
  8. R. L. Burguete and E. A. Patterson, "The Effect of Mean Stress on the Fatigue Limit of High Tension Bolts," Proceedings of the Institution of Mechanical Engineers, Vol.209, pp.257-262, 1995
  9. J. W. Hobbs, R. L. Burguete, P. F. Heyes and E. A. Patterson, "The Effect of Eccentric Loading on the Fatigue Performance of High-Tensile Bolts," Int. J. Fatigue, Vol.22, pp.531-538, 2000 https://doi.org/10.1016/S0142-1123(00)00004-9
  10. J. H. Bickford, An Introduction to the Design and Behavior of Bolted Joints, Marcel Decker, Inc., pp.595-596, 1995