• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1528-1534
• /
• 2001

In order to improve Leak-Be(ore-Break methodology, more precisely the crack growth evaluation, a round robin analysis was proposed by the CEA Saclay. The aim of this analysis was to evaluate the crack initiation life, penetration life and shape of through wall crack under cyclic bending loads. The proposed round robin analysis is composed of three main topic; fatigue crack initiation, crack propagation and crack penetration. This paper deals with the first topic, crack initiation in a notched pipe under four point bending. Both elastic-plastic finite element analysis and Neuber's rule were used to estimate the crack initiation life and the finite element models were verified by mesh-refinement, stress distribution and global deflection. In elastic-plastic finite element analysis, crack initiation life was determined by strain amplitude at the notch tip and strain-life curve of the material. In the analytical method, Neuber's rule with the consideration of load history and mean stress effect, was used for the life estimation. The effect of notch tip radius, strain range, cyclic hardening rule were examined in this study. When these results were compared with the experimental ones, the global deformation was a good agreement but the crack initiation cycle was higher than the experimental result.

• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.535-544
• /
• 2011

레일 표면 결함이 발생할 경우 매우 높은 충격하중이 발생하여 레일 피로 진전 또는 레일 파단에 이를 수 있고 레일이 파단될 경우 열차탈선 등 대형 사고가 발생할 수 있으므로 레일 결함부에 대한 관리기준의 정립이 매우 중요하다. 본 연구에서는 차량-궤도 동적 상호작용 해석 프로그램을 이용하여, 실제 고속철도 자갈궤도에서 결함이 발생한 43개 지점에서 측정된 레일요철을 입력값으로 하여, 요철 깊이에 따른 충격 윤중과 레일 휨응력을 산정하였다. 궤도틀림을 감안하여 윤중 및 레일 휨응력의 한계값을 설정하고, 해석결과로부터 얻은 윤중 및 레일 휨응력 최대값과 결함 깊이 및 폭과의 상관관계를 분석함으로써 레일 표면 결함부에 대한 관리기준을 제시하였다. 분석 결과, 허용할 수 있는 요철 깊이는 충격 윤중에 의하여 발생할 수 있는 레일 두부의 소성 변형을 방지하기 위하여 관리되어야 하며, 엄격한 조건을 평가할 경우 그 값은 0.2mm 정도가 적당함을 알 수 있었다.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.119-124
• /
• 2008

Many automobile assembly workers often do several cycles of tasks continuously, i.e., without breaks, to get a longer break. This is not recommended since the dose of fatigue increases exponetially with time and it takes much longer time to recover. In this study, a laboratory experiment was conducted to investigate the effect of work/rest schedules on workload of a repetitive upper-limb task. Eleven male subjects participated in the experiment, in which simulated screw driving tasks were carried out repetitively with 3 different work/rest schedules: standard breaks(1 cycle of work at a time, 60 20-s breaks), medium breaks(5 cycles of work at a time, 12 100-s breaks), and long breaks(10 cycles of work at a time, 6 200-s breaks). The result showed that medium- and long-breaks schedules significantly increased the level of perceived discomfort and %HRR as compared to the standard-break schedule. The subjects' preference was not statistically different among work/rest schedules, which might be caused from the absolutely low level of workload of the experimental tasks. From the results, it is recommended to have frequent and shorter breaks rather than infrequent and longer breaks to decrease the level of physical workload. A more expanded studies, however, should be carried out to provide more practical safety guidelines on the work practice of continuous working without breaks among automobile assembly workers.

• 한국철도학회논문집
• /
• 제14권3호
• /
• pp.222-227
• /
• 2011

드로퍼는 전차선로에서 여러형태의 클램프로 취부되어 전차선이 수평으로 유지하도록 지지하고, 판토그라프가 통과할 때 굽힘에 대한 기계적 응력에 영향을 받는다. 고속선용 드로퍼의 파단 원인을 조사하기 위해, 이론적 분석 및 시험을 실행하였다. 본 논문에서 사전이도에 의한 드로퍼의 정적 하중을 계산하였고, 시험에서 측정된 값과 유사하였다. 드로퍼 와이어의 파단원인을 분석하기 위해 현장에서 파단된 시료는 SEM 분석을 하였고, 새 시료도 일부 병행하며 시행하였다. 마지막으로, 고속열차가 300km/h로 통과할 때 드로퍼에 대한 동적 하중의 변화를 측정하였다. 기계적 하중이 반복적으로 발생될 때, 드로퍼 와이어는 피로에 의해 파단될 것이다. 이 결과는 고속전차선로 유지보수의 특별 관리와 드로퍼의 수명평가를 하는데 활용될 수 있을 것이다.

• 한국농촌생활과학회지
• /
• 제9권2호
• /
• pp.51-62
• /
• 1998

This study was performed to suggest the health management of farmers compared with different farming types, such as rice plant, livestock, horticulture, orchard and others, for the farmer's health enhancement. For this study, 720 subjects were selected in 8 provinces through cluster method, and relevent caculations for the analysis of the subjects were made SAS program, and tested significance with x$^2$ and F value, those probability levels were 0.1%, 1% and 5%. Among the subjects, aged 40's were 38%, females 66%, elementary graduates (32%), and think of living conditions were average (67%). In the self-consciousness test for health, there was no significant difference of farmers with farming types. In the aspect of agricultural work situation, they took holidays according to the weather conditions or no pressed work to be done. And They took a break “when they feel tired during work”. For the recovery of fatigue, sleeping was chosen as the most favorite (68%) followed bathing (17%). but exercise was the lowest (7%). In the case of working conditions, 74% of them replied they work under average condition, and only 9% of them thought they were under pleasant surroundings. And 37% of them have had healthy food, for health practice and restorative for health. 20% of them have had breakfast irregularly. In addition to the regular meal intake, sufficient re자 and pleasant agricultural working conditions would be necessary for health, and the farmers themselves should recognize the importance and care of health. The project for enhancement of the farmers' health is needed and who should give guideline to have the responsibility for health.

• 한국전문물리치료학회지
• /
• 제4권2호
• /
• pp.59-65
• /
• 1997

To improve the effect of balance training, visual feedback is usually used. During the training process there are some factors which decrease the effect. Neurophysiologically, the main negative factor is thought to be synaptic fatigue which decreases the sensitivity of synapses. The purpose of this study was to find a more effective balance training method. In this study, a total of 60 normal subjects-19~30 years old young males and females(M=30, F=30)-participated, and they were randomized as A, B, and C group, each group containing 20 subjects. First, all groups had a pre-test of sway balance. One minute later, A group was trained in sway balance by continuous visual feedback for 2 minutes, B group by intermittent visual feedback which had 4 sessions of 30 seconds each and a one minute rest break. C group was not trained at all. All groups had a post-test. Only B group had improved balance compared with C group by ANOVA. On the other hand, intermittent visual feedback was more effective than continuous visual feedback in sway balance training with normal subjects.

• Structural Engineering and Mechanics
• /
• 제59권6호
• /
• pp.1095-1120
• /
• 2016

This paper investigates the change of structural characteristics of steel cable-stayed bridges after cable failure. Cables, considered as the intermediate supports of cable-stayed bridges, can break or fail for several reasons, such as fire, direct vehicle clash accident, extreme weather conditions, and fatigue of cable or anchorage. Also, the replacement of cables can cause temporary disconnection. Because of the structural characteristics with various geometric nonlinearities of cable-stayed bridges, cable failure may cause significant change to the structural state and ultimate behavior. Until now, the characteristics of structural behavior after cable failure have rarely been studied. In this study, rational cable failure analysis is suggested to trace the new equilibrium with structural configuration after the cable failure. Also, the sequence of ultimate analysis for the structure that suffers cable failure is suggested, to study the change of ultimate behavior and load carrying capacity under specific live load conditions. Using these analysis methods, the statical behavior after individual cable failure is studied based on the change of structural configuration, and distribution of internal forces. Also, the change of the ultimate behavior and load carrying capacity under specific live load conditions is investigated, using the proposed analysis method. According to the study, significant change of the statical behavior and ultimate capacity occurs although just one cable fails.

• Carbon letters
• /
• 제9권4호
• /
• pp.324-339
• /
• 2008

The principal aims of the review paper are (1) to establish broad overview information, both qualitative and quantitative, relating to the world market for polyacrylonitrile (PAN) or pitch-based carbon fibers; and (2) to generate an effective analysis and break down of consumption by process route and eventual end-use. The review paper also designed specifically to provide subscribers with an accurate, independent, and realistic assessment of the current status and future perspective of the market for carbon fibers in the world. The world market for carbon fibers continues to grow rapidly, fuelled by new industrial end uses, such as sport and leisure goods, aerospace, automotive applications, civil engineering and infrastructure repair, and immerging applications in energy generation. Demands for properties of carbon fibers used in those applications include many things such as strength, toughness, fatigue property, corrosion resistance, heat resistance, etc., and these become to be higher level. On the other hand, demands for manufacturing technologies of carbon fibers become to be difficult with these demands for properties, and these are wide variety such as high efficiencies, high qualities, many functions, labor saving, and low cost. In this review paper, thus, the recent carbon fibers corresponded to these needs, and its latest manufacturing technologies as well as market prospects are described.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4518-4540
• /
• 2019

With the development of IT convergence technology, autonomous driving has gradually developed; however, the vehicle is still operated by the driver, who should always be in good health - but sometimes, this is not the case. It is especially dangerous to drive when drowsy, and unable to fully concentrate on driving, such as when taking certain medicines, or through fatigue. Drowsy driving is at least eight times more dangerous than normal driving, and as dangerous as drunk driving. Previous research has looked at technology to detect drowsiness, in order to wake up drivers when necessary, or to safely stop the vehicle. Furthermore, many studies have been conducted to find out when drowsiness occurs. However, it is more desirable for the driver to take sufficient rest during a break, in order to be able to continue to focus and drive. In other words, it is important to maintain a normal state before drowsiness. In this study, we introduce a sound source to increase driver concentration and prevent drowsiness, another that can improve the quality of sleep, and a system that produces these sound sources. The proposed system has a noise reduction effect of about 15 dB. We have confirmed that the proposed sound induces an EEG of the desired form.

• 패션비즈니스
• /
• 제25권1호
• /
• pp.39-50
• /
• 2021

The purpose of this study was to investigate how wearing calf support and applying of electronic muscle simulation(EMS) affected the ability to balance. In this study, the one leg standing test for static balance and the Y balance test for dynamic balance were used to assess balance. At this time, the pressure of the calf support was different to produce two supporters, and a difference between wearing the support before, after, and after applying EMS was evaluated. Seven men in their 20s with healthy bodies were measured five times each with a five-minute break, taking into account muscle fatigue, and the difference between each variable was analyzed through a follow-up test using nonparametric statistical analysis. Studies have shown more difference from supporter B with a more appropriate pressure (mmgh) for increasing balance capability than from supporter A. In addition, it was confirmed that the use of EMS electrostimulation and support before measuring the balance capability resulted in a greater difference. The proper pressure (mmgh) supporters and EMS can increase the ability to balance, and these results can be expected to improve the balance ability of ordinary people in their daily lives.