DOI QR코드

DOI QR Code

Structural behavior of cable-stayed bridges after cable failure

  • Kim, Seungjun (Department of Construction Safety and Disaster Prevention Engineering, Daejeon University) ;
  • Kang, Young Jong (School of Architectural, Civil and Environmental Engineering, Korea University)
  • 투고 : 2016.01.02
  • 심사 : 2016.05.27
  • 발행 : 2016.09.25

초록

This paper investigates the change of structural characteristics of steel cable-stayed bridges after cable failure. Cables, considered as the intermediate supports of cable-stayed bridges, can break or fail for several reasons, such as fire, direct vehicle clash accident, extreme weather conditions, and fatigue of cable or anchorage. Also, the replacement of cables can cause temporary disconnection. Because of the structural characteristics with various geometric nonlinearities of cable-stayed bridges, cable failure may cause significant change to the structural state and ultimate behavior. Until now, the characteristics of structural behavior after cable failure have rarely been studied. In this study, rational cable failure analysis is suggested to trace the new equilibrium with structural configuration after the cable failure. Also, the sequence of ultimate analysis for the structure that suffers cable failure is suggested, to study the change of ultimate behavior and load carrying capacity under specific live load conditions. Using these analysis methods, the statical behavior after individual cable failure is studied based on the change of structural configuration, and distribution of internal forces. Also, the change of the ultimate behavior and load carrying capacity under specific live load conditions is investigated, using the proposed analysis method. According to the study, significant change of the statical behavior and ultimate capacity occurs although just one cable fails.

키워드

참고문헌

  1. Adeli, H. and Zhang, J. (1994), "Fully nonlinear analysis of composite girder cable-stayed bridges", Comput. Struct., 54(2), 267-277. https://doi.org/10.1016/0045-7949(94)00332-W
  2. Chen, D.W., Au, F.T.K., Tham, L.G. and Lee, P.K.K. (2000), "Determination of initial cable forces in prestressed concrete cable-stayed bridges for given design deck profiles using the force equilibrium method", Comput. Struct., 74, 1-9. https://doi.org/10.1016/S0045-7949(98)00315-0
  3. Cheng, J. and Xiao, R.C. (2004), "Probabilistic determination of initial cable forces of cable-stayed bridges under dead loads", Struct. Eng. Mech., 17(2), 267-279. https://doi.org/10.12989/sem.2004.17.2.267
  4. Crisfield, M.A. (1983), "An arc-length method including line searches and accelerations", Int. J. Numer. Meth. Eng., 19, 1269-1289. https://doi.org/10.1002/nme.1620190902
  5. Ernst, H.J. (1965), "Der e-modul von seilen unter berucksichtigung des durchanges", Der Bauingenieur, 40, 52-55. (in German)
  6. Fleming, J.F. (1979), "Nonlinear static analysis of cable-stayed bridges", Comput. Struct., 10, 621-635. https://doi.org/10.1016/0045-7949(79)90006-3
  7. Freire, A.M.S., Negrao, J.H.O. and Lopes, A.V. (2006), "Geometric nonlinearities on the static analysis of highly flexible steel cable-stayed bridges", Comput. Struct., 84, 2128-2140. https://doi.org/10.1016/j.compstruc.2006.08.047
  8. Gimsing, N.J. (1983), Cable supported bridges Concept & Design, 2nd Edition, John Wiley & Sons Ltd., New York.
  9. Kim, K.S. and Lee, H.S. (2001), "Analysis of target configurations under dead loads for cable-supported bridges", Comput. Struct., 79, 2681-2692. https://doi.org/10.1016/S0045-7949(01)00120-1
  10. Kim, S. (2010), "Ultimate Analysis of Steel Cable-stayed Bridges", Ph.D. Dissertation, Korea University, Seoul, Korea.
  11. Lim, N.H., Han, S.Y., Han, T.H. and Kang, Y.J. (2008), "Parametric study on stability of continuous welded rail track - ballast resistance and track irregularity", Int. J. Steel. Struct., 8(3), 171-81.
  12. Ministry of Land, Infrastructure and Transport (2010), Korean Highway Bridge Design Code, Seoul, Korea.
  13. Raftoyiannis, I.G., Konstantakopoulos, T.G. and Michaltsos, G.T. (2014), "Dynamic response of cablestayed bridges subjected to sudden failure of stays-the 2D problem", Coupled Syst. Mech., 3(4), 345-365. https://doi.org/10.12989/csm.2014.3.4.345
  14. Reddy, P., Ghaboussi, J. and Hawkins, N.M. (1999), "Simulation of construction of cable-stayed bridges", J. Bridge. Eng., 4(4), 249-257. https://doi.org/10.1061/(ASCE)1084-0702(1999)4:4(249)
  15. Ren,W.X. (1999), "Ultimate behavior of long-span cable-stayed bridges", J. Bridge. Eng., 4(1), 30-36. https://doi.org/10.1061/(ASCE)1084-0702(1999)4:1(30)
  16. Shu, H.S. and Wang, Y.C. (2001), "Stability analysis of box-girder cable-stayed bridges", J. Bridge. Eng., 6(1), 63-68. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:1(63)
  17. Song, M.K., Kim, S.H. and Choi, C.K. (2006), "Enhanced finite element modeling for geometric non-linear analysis of cable-supported structures", Struct. Eng. Mech., 22(5), 575-597. https://doi.org/10.12989/sem.2006.22.5.575
  18. Song, W.K. and Kim, S.E. (2007), "Analysis of the overall collapse mechanism of cable-stayed bridges with different cable layouts", Eng. Struct., 29, 2133-2142. https://doi.org/10.1016/j.engstruct.2006.11.005
  19. Tang, C.C., Shu, H.S. and Wang, Y.C. (2001), "Stability analysis of steel cable-stayed bridge", Struct. Eng. Mech., 11(1), 35-48. https://doi.org/10.12989/sem.2001.11.1.035
  20. Wang, P.H. and Yang, C.G. (1993), "Parametric studies on cable stayed bridges", Comput. Struct., 60(2), 243-260. https://doi.org/10.1016/0045-7949(95)00382-7
  21. Wang, P.H., Lin, H.T. and Tang, T.Y. (2002), "Study on nonlinear analysis of a highly redundant cablestayed bridges", Comput. Struct., 80, 165-182. https://doi.org/10.1016/S0045-7949(01)00166-3
  22. Wang, P.H., Tang, T.Y. and Zheng, H.N. (2004), "Analysis of cable-stayed bridges during construction by Cantilever methods", Comput. Struct., 82, 329-346. https://doi.org/10.1016/j.compstruc.2003.11.003
  23. Wang, P.H., Tseng, T.C. and Yang, C.G. (1993), "Initial shape of cable stayed bridge", Comput. Struct., 47(1), 111-123. https://doi.org/10.1016/0045-7949(93)90284-K
  24. Xi, Y. and Kuang, J.S. (1999), "Ultimate load capacity of cable-stayed bridges", J. Bridge. Eng., ASCE, 4(10), 14-22. https://doi.org/10.1061/(ASCE)1084-0702(1999)4:1(14)
  25. Yang, Y.B. and Kuo, S.R. (1994), Theory and Analysis of Nonlinear Framed Structures, Prentice-Hall, Inc., Singapore.

피인용 문헌

  1. Ultimate Behavior of Steel Cable-Stayed Bridges During Construction pp.2093-6311, 2019, https://doi.org/10.1007/s13296-018-0176-x
  2. A new cable force identification method considering cable flexural rigidity vol.68, pp.2, 2018, https://doi.org/10.12989/sem.2018.68.2.227
  3. Mitigation of the seismic response of a cable-stayed bridge with soil-structure-interaction effect using tuned mass dampers vol.69, pp.6, 2019, https://doi.org/10.12989/sem.2019.69.6.699
  4. Spatially variable effects on seismic response of the cable-stayed bridges considering local soil site conditions vol.70, pp.2, 2016, https://doi.org/10.12989/sem.2019.70.2.143
  5. Research on the Damage Evolution Process of Steel Wire with Pre-Corroded Defects in Cable-Stayed Bridges vol.9, pp.15, 2016, https://doi.org/10.3390/app9153113
  6. Effect of Load Cases and Hanger-Loss Scenarios on Dynamic Responses of the Self-Anchored Suspension Bridge to Abrupt Rupture of Hangers vol.34, pp.5, 2016, https://doi.org/10.1061/(asce)cf.1943-5509.0001482
  7. Numerical assessment of the damage-tolerance properties of polyester ropes and metallic strands vol.79, pp.1, 2016, https://doi.org/10.12989/sem.2021.79.1.083